Ethernet - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Mon, 30 Mar 2026 09:53:49 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Ethernet - FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html#respond Mon, 30 Mar 2026 09:39:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14848 FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.

FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug QSFP56-DD and QSFP28form factor
  • QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
  • Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
  • 8x 50Gb/s PAM4 modulation
  • Low power dissipation <9W (400G End)
  • Low power dissipation <4.5W (100G End)
  • RoHS-6 compliant (lead-free)
  • Commercial case temperature range of 0°C to 70°C
  • Single 3.3V power supply
  • Maximum link length of 70m on OM3 MMF
    and 100m on OM4 & OM5 MMF
  • Uncooled 850nm VCSEL array (both End)
  • PIN photo detector array (both End)
  • 400GBASE-SR8 and 100GBASE-SR2 compliant
  • I2C management interface
  • CMIS V4.0 compliant

 

Applications

  • IEEE 802.3cd&nbsp100GBASE-SR2 Ethernet (PAM4)
  • IEEE 802.3cd&nbsp400GBASE-SR8 Ethernet (PAM4)

The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html/feed 0 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:53:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14840 FIBERSTAMP’s FYLU-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP112 port has integrate 4 independent transmit and receive channels and uses QSFP112 MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP112 MSA.

The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug OSFP-RHS and QSFP112 form factor
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • 4 channels 850nm VCSEL array(both End)
  • 4 channels PIN photo detector array(both End)
  • Power consumption <8W
  • Compliant to OSFP&QSFP112 MSA and CMIS4.0
  • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

 

Applications

  • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html/feed 0 FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:17:44 +0000 https://www.fiberstamp.com/?post_type=product&p=14837 FIBERSTAMP’s FYLU-400M50C MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP-DD port has integrate 4 independent transmit and receive channels and uses QSFP-DD MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP-DD MSA.

The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug OSFP-RHS and QSFPDD form factor
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • 4 channels 850nm VCSEL array(both End)
  • 4 channels PIN photo detector array(both End)
  • Power consumption <8W
  • Compliant to OSFP&QSFP-DD MSA and CMIS4.0
  • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 10°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

 

Applications

  • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html/feed 0 FIBERSTAMP 53G SFP56 Active Optical Cable https://www.fiberstamp.com/53g-sfp56-aoc.html-2 https://www.fiberstamp.com/53g-sfp56-aoc.html-2#respond Mon, 23 Mar 2026 07:56:49 +0000 https://www.fiberstamp.com/?post_type=product&p=14829 The FIBERSTAMP FYD-E50M100C is a single-Channel Active Optical Cable for 26.5625GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

]]> Features

  • full-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 53Gbps PAM4 transmitter and PAM4 receiver
  • 850nm VCSEL array
  • PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <2W
  • Hot Pluggable SFP form factor and Compliant with SFF-8431,SFF-8472
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS 6 compliant(lead free)

 

Applications

  • IEEE 802.3cd 50GBASE-SR

The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/53g-sfp56-aoc.html-2/feed 0 10G SFP+ BiDi 10～80km Single-fiber Bidirectional Transceiver Module (Industrial-Grade Option Available) https://www.fiberstamp.com/10g-sfp-bidi-10-80km.html https://www.fiberstamp.com/10g-sfp-bidi-10-80km.html#respond Wed, 28 Jan 2026 05:45:43 +0000 https://www.fiberstamp.com/?post_type=product&p=14591 FIBERSTAMP’s 10G BiDi SFP+ optical transceiver series is widely deployed in 10G Ethernet and Optical Transport Network (OTN OTU2e) applications. The modules are fully compatible with 10G CPRI, SONET OC-192 / SDH STM-64, and 10G Fibre Channel standards. Designed for single-fiber transmission over single-mode fiber, they support reach options from 10 km up to 80 km, enabling efficient fiber utilization and flexible network deployment.

The post 10G SFP+ BiDi 10～80km Single-fiber Bidirectional Transceiver Module (Industrial-Grade Option Available) first appeared on FIBERSTAMP.

]]>
  • Hot-pluggable SFP+ form factor
  • Full-duplex optical transceiver module
  • Compliant with SFP+ MSA and 10G Ethernet standards
  • Data rates up to 10.3 Gbps
  • DFB laser transmitter with PIN/APD receiver
  • Single-fiber transmission over single-mode fiber, supporting distances from 10 km to 80 km
  • Simplex LC optical connector
  • Integrated Digital Diagnostic Monitoring (DDM)
  • Commercial operating temperature range: 0°C to 70°C
  • Industrial-grade operating temperature range: –40°C to +85°C (Part Numbers Ending with “T”)
  • 3.3 V power supply
  • RoHS compliant (lead-free)
    • P/N Description
    FCB-E102733K10CT 10GE BiDi SFP+, 1270nm Tx DFB 1330nm-Rx PIN, 1330nm-Tx DFB 1270nm-Rx PI, 10km, SMF, Single LC, 1.5W
    FCB-E103327K10CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx PIN, 10km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E102733K20CT 10GE BiDi SFP+, 1270nm-Tx DFB 1330nm-Rx PIN, 20km, SMF, Single LC, 1.5W
    FCB-E103327K20CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx PIN, 20km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E102733K40CT 10GE BiDi SFP+, 1270nm-Tx DFB 1330nm-Rx PIN, 40km, SMF, Single LC, 1.5W
    FCB-E103327K40CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx PIN, 40km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E102733K60CT 10GE/CPRI BiDi SFP+, 1270nm-Tx DFB 1330nm-Rx APD, 60km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E103327K60CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx APD, 60km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E104955K80C 10GE/OTN BiDi SFP+, 1490nm-Tx 1550nm-Rx, 80km, SMF, Single LC
    FCB-E105549K80C 10GE/OTN BiDi SFP+, 1550nm-Tx 1490nm-Rx, 80km, SMF, Single LC

    The post 10G SFP+ BiDi 10～80km Single-fiber Bidirectional Transceiver Module (Industrial-Grade Option Available) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/10g-sfp-bidi-10-80km.html/feed 0     FIBERSTAMP 100G SFP112 SR1 Optical Transceiver https://www.fiberstamp.com/100g-sfp112-sr1.html https://www.fiberstamp.com/100g-sfp112-sr1.html#respond Wed, 29 Oct 2025 10:00:51 +0000 https://www.fiberstamp.com/?post_type=product&p=13865 The FIBERSTAMP Technologies 100G SFP112 SR1 is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

    • Full-duplex transceiver modules
    • 53.125GBdPAM4 transmitter and PAM4 receiver
    • 850nm VCSEL and PIN receiver
    • Internal DSPon both receiver and transmitter channels
    • Power consumption <2.1W
    • Hot Pluggable SFP112form factor
    • Compliant with SFF-DD MSA,CMIS
    • Up to 100m transmission distance on OM4/OM5 MMF with FEC
    • DuplexLC/APC connector
    • Built-in digital diagnostic functions
    • Operating case temperature:0°C to +70°C
    • +3V power supply
    • RoHS 6 compliant(lead free)

     

    Applications

      • IEEE 802.3db100GBASE-SR1

    The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-sr1.html/feed 0     FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module https://www.fiberstamp.com/400g-qsfpdd-er8.html https://www.fiberstamp.com/400g-qsfpdd-er8.html#respond Thu, 18 Sep 2025 09:24:25 +0000 https://www.fiberstamp.com/?post_type=product&p=13829 FIBERSTAMP's 400G QSFP-DD ER8 module is designed for 40 km optical communication applications, and it is compliant to IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

    The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP-DD MSA compliant
    • Compliant to IEEE 802.3bs 400GBASE-ER8
    • Digital diagnostic monitoring support
    • Hot pluggable 76 pin electrical interface
    • 8 LAN-WDM lanes MUX/DEMUX design
    • 53.125 Gbps PAM4 Channel Electrical Serial
    • Interface (400GAUI-8)
    • Maximum power consumption 15.4 W
    • LC duplex connector
    • Supports 425 Gb ps bit rate
    • Up to 40 km transmission on single mode fiber
    • Operating case temperature: 0 。C to 70 。C
    • Single 3.3 V power supply
    • RoHS 2 compliant

    Applications

    • 400GBASE-ER8 Ethernet
    • Telecom networking
    • Data Center Interconnect

    The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfpdd-er8.html/feed 0     FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-er4.html https://www.fiberstamp.com/200g-qsfpdd-er4.html#respond Thu, 18 Sep 2025 09:17:56 +0000 https://www.fiberstamp.com/?post_type=product&p=13826 FIBERSTAMP’s 200GE QSFP-DD ER4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 40km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-ER4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDMcooled EML transmitter
    • 4 channels APD receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 40km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-ER4 Ethernet
    • Telecom networking
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-er4.html/feed 0     FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-lr4.html https://www.fiberstamp.com/200g-qsfpdd-lr4.html#respond Thu, 18 Sep 2025 08:16:01 +0000 https://www.fiberstamp.com/?post_type=product&p=13823 FIBERSTAMP’s 200G QSFP-DD LR4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 10km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-LR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDM cooled EML transmitter
    • 4 channels PIN photo detector array receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 10km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-LR4 Ethernet
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-lr4.html/feed 0     100G QSFP28 Hardened Active Optical Cable https://www.fiberstamp.com/100g-qsfp28-haoc.html-2 https://www.fiberstamp.com/100g-qsfp28-haoc.html-2#respond Tue, 26 Aug 2025 03:38:29 +0000 https://www.fiberstamp.com/?post_type=product&p=13768 The FIBERSTAMP Technologies 100G QSFP28 HAOC is a four-channel, pluggable, parallel fiber-optic transceiver designed for 100G or 40G Ethernet and InfiniBand FDR/EDR applications. This high-performance module is ideal for short-range, multi-lane data communications and interconnect deployments.

    Built with a ruggedized optical cable structure featuring a stainless steel tube, Kevlar reinforcement, and an LSZH jacket, delivering reliable performance over distances of up to 70 meters on OM3 multimode fiber. Engineered for long-term durability and resistance to harsh environments, it ensures superior reliability for demanding applications.

    The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     Features

    ▪ 4 channels full-duplex transceiver modules
    ▪ Transmission data rate up to 25Gbps per channel ▪ Support 40GE and 56G FDR data rate
    ▪ 4 channels 850nm VCSEL array
    ▪ 4 channels PIN photo detector array
    ▪ Internal CDR circuits on both receiver and transmitter channels
    ▪ Support CDR bypass
    ▪ Low power consumption <2W
    ▪ Hot Pluggable QSFP form factor ▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF)
    ▪ Single MPO connector receptacle
    ▪ Operating case temperature -40°C to +85°C
    ▪ 3.3V power supply voltage
    ▪ RoHS compliant(lead-free)
    ▪ Hardened active optical cable with metal tube and Kevlar strengthen

    Applications

    ▪ IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
    ▪ Infiniband FDR/EDR

    The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-haoc.html-2/feed 0