LAN-WDM - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 18 Sep 2025 09:33:42 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png LAN-WDM - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module https://www.fiberstamp.com/400g-qsfpdd-er8.html https://www.fiberstamp.com/400g-qsfpdd-er8.html#respond Thu, 18 Sep 2025 09:24:25 +0000 https://www.fiberstamp.com/?post_type=product&p=13829 FIBERSTAMP's 400G QSFP-DD ER8 module is designed for 40 km optical communication applications, and it is compliant to IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA compliant
  • Compliant to IEEE 802.3bs 400GBASE-ER8
  • Digital diagnostic monitoring support
  • Hot pluggable 76 pin electrical interface
  • 8 LAN-WDM lanes MUX/DEMUX design
  • 53.125 Gbps PAM4 Channel Electrical Serial
  • Interface (400GAUI-8)
  • Maximum power consumption 15.4 W
  • LC duplex connector
  • Supports 425 Gb ps bit rate
  • Up to 40 km transmission on single mode fiber
  • Operating case temperature: 0 。C to 70 。C
  • Single 3.3 V power supply
  • RoHS 2 compliant

Applications

  • 400GBASE-ER8 Ethernet
  • Telecom networking
  • Data Center Interconnect

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfpdd-er8.html/feed 0 FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-er4.html https://www.fiberstamp.com/200g-qsfpdd-er4.html#respond Thu, 18 Sep 2025 09:17:56 +0000 https://www.fiberstamp.com/?post_type=product&p=13826 FIBERSTAMP’s 200GE QSFP-DD ER4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 40km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-ER4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDMcooled EML transmitter
    • 4 channels APD receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 40km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-ER4 Ethernet
    • Telecom networking
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-er4.html/feed 0     FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-lr4.html https://www.fiberstamp.com/200g-qsfpdd-lr4.html#respond Thu, 18 Sep 2025 08:16:01 +0000 https://www.fiberstamp.com/?post_type=product&p=13823 FIBERSTAMP’s 200G QSFP-DD LR4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 10km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-LR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDM cooled EML transmitter
    • 4 channels PIN photo detector array receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 10km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-LR4 Ethernet
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-lr4.html/feed 0     100G QSFP28 ZR4 EML LWDM4 60km/80km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-zr4.html https://www.fiberstamp.com/100g-qsfp28-zr4.html#respond Wed, 09 Aug 2023 09:27:08 +0000 https://www.fiberstamp.com/?post_type=product&p=9324 FIBERSTAMP 100G QSFP28 ZR4 optical transceiver module is used for long-distance transmission in the field of data communication or telecom, and is compliant with 100G Ethernet transmission protocol, with optional dual-rate versions compatible with 100G Ethernet and OTN OTU4 transmission protocol. The product has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 60km or 80km(with FEC on).

    The post 100G QSFP28 ZR4 EML LWDM4 60km/80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM EML uncooled transmitter and APD ROSA
  • Transmission rates of up to 25.78125Gbps or 27.95Gbps per channel
  • Compliant with QSFP28 MSA, and 100GE Ethernet transport protocol
  • Optional multi-rate versions compatible with 100G Ethernet and OTN OTU4
  • Distance up to 60km (without FEC on) or 80km (with FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 6w
  • Dual LC optical connectors
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-112L4K80C 100GE QSFP28 ZR4 EML LWDM4 80km Optical Module

    The post 100G QSFP28 ZR4 EML LWDM4 60km/80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-zr4.html/feed 0     40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver https://www.fiberstamp.com/40g-qsfp-zr4.html https://www.fiberstamp.com/40g-qsfp-zr4.html#respond Wed, 09 Aug 2023 06:51:52 +0000 https://www.fiberstamp.com/?post_type=product&p=9252 FIBERSTAMP 40G QSFP+ ZR4 optical transceiver module is designed for long-distance interconnectivity in data centers. It complies with the 40G Ethernet transmission protocol and supports dual rates of 40GE and OTU3. This module features a built-in pair of 4-channel MUX and DEMUX. Each channel operates at a center wavelength of 1295.56nm, 1300.05nm, 1304.58nm, and 1309.14nm. It utilizes a single-mode fiber pair for transmission, enabling distances of up to 80km.

    The post 40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4-channel full-duplex transceiver module in QSFP+ hot-pluggable form factor
  • 4-channel cooled EML LWDM TOSA and PIN ROSA (with built-in SOA)
  • Compliant with QSFP+ MSA, 40G Ethernet and OTN OTU3 transmission protocols
  • Supports transmission rates up to 39.8Gbps to 44.6Gbps
  • Utilizes single-mode fiber for transmission, with a maximum reach of 80km
  • Power consumption of less than 6W
  • Dual LC optical connectors
  • Designed for commercial-grade operating temperature range
  • Operates at a voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBF-N40L4K80C 40GE/OTU3 QSFP+ ZR4 EML LWDM4 80km Optical Transceiver Module

    The post 40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-zr4.html/feed 0     100G QSFP28 ER4 DML LWDM4 SMF LC 40km Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-er4.html https://www.fiberstamp.com/100g-qsfp28-er4.html#respond Wed, 09 Aug 2023 06:29:13 +0000 https://www.fiberstamp.com/?post_type=product&p=9245 FIBERSTAMP 100G QSFP28 ER4 optical transceiver module is used for long-distance transmission in the field of data communication or telecom, which is compliant with 100G Ethernet transmission protocol and compatible with OTN OTU4 transmission protocol. It has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 40km (without FEC on).

    The post 100G QSFP28 ER4 DML LWDM4 SMF LC 40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM EML uncooled transmitter and APD ROSA
  • Transmission rates of up to 27.95Gbps per channel
  • Compliant with QSFP28 MSA, and 100GE Ethernet transport protocol
  • Optional multi-rate versions compatible with 100G Ethernet and OTN OTU4
  • Backward compatible with IEEE 802.3ba 100GBASE-ER4 and InfiniBand FDR transport protocols
  • Distance up to 40km (without FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 6w
  • Dual LC optical connectors
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-100L4K40C 100GE QSFP28 ER4 EML LWDM4 40km Optical Module
    FBG-112L4K40C 100GE/OTU4 QSFP28 ER4 EML LWDM4 40km Optical Module

    The post 100G QSFP28 ER4 DML LWDM4 SMF LC 40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-er4.html/feed 0     40G QSFP+ PSM4 DML 1310nm 2km/10km SMF MPO Optical Transceiver https://www.fiberstamp.com/40g-qsfp-psm4.html https://www.fiberstamp.com/40g-qsfp-psm4.html#respond Wed, 09 Aug 2023 02:52:53 +0000 https://www.fiberstamp.com/?post_type=product&p=9231 FIBERSTAMP 40G QSFP+ PSM4 optical transceiver module is designed for medium to long-distance interconnections in data centers. It is compliant with the 40G Ethernet transmission protocol and offers an optional dual-rate version for 40GE/OTU3. This series of products utilizes 4 pairs of parallel single-mode fibers for transmission, with a center wavelength of 1310nm. The maximum transmission distance can reach 2km or 10km, depending on the specific model.

    The post 40G QSFP+ PSM4 DML 1310nm 2km/10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
    • Hot-pluggable QSFP+ transceiver modules
    • 4x 10G NRZ electrical interface
    • 2x 20G NRZ or 4x 10G NRZ optical interface
    • Compliant with QSFP+ MSA and IEEE 802.3
    • Low power dissipation
    • Built-in digital diagnostic functionality
    • Commercial or industrial case operating temperature range
    • Single 3.3V power supply
    • RoHS compliant (lead free)

    • The post 40G QSFP+ PSM4 DML 1310nm 2km/10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-psm4.html/feed 0     100G QSFP28 eER4 EML LWDM4 60km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-eer4.html https://www.fiberstamp.com/100g-qsfp28-eer4.html#respond Wed, 09 Aug 2023 02:32:18 +0000 https://www.fiberstamp.com/?post_type=product&p=9227 FIBERSTAMP  100G QSFP28 eER4 optical transceiver module is used for long-distance transmission in the field of data communication or telecom, and is compliant with 100G Ethernet transmission protocol, with optional dual-rate versions compatible with 100G Ethernet and OTN OTU4 transmission protocol. The product has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 60km (without FEC on).

    The post 100G QSFP28 eER4 EML LWDM4 60km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM EML uncooled transmitter and APD ROSA
  • Transmission rates of up to 25.78125Gbps or 27.95Gbps per channel
  • Compliant with QSFP28 MSA, and 100GE Ethernet transport protocol
  • Optional multi-rate versions compatible with 100G Ethernet and OTN OTU4
  • Distance up to 60km (without FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 6w
  • Dual LC optical connectors
  • Commercial and industrial grade operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-112L4K60C 100GE QSFP28 eER4 EML LWDM4 60km Optical Module

    The post 100G QSFP28 eER4 EML LWDM4 60km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-eer4.html/feed 0     100G QSFP28 ER4 Lite DML LWDM4 SMF LC 30km/40km Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-er4-lite.html https://www.fiberstamp.com/100g-qsfp28-er4-lite.html#respond Wed, 09 Aug 2023 02:22:43 +0000 https://www.fiberstamp.com/?post_type=product&p=9226 FIBERSTAMP  100G QSFP28 ER4 optical transceiver module is used for long-distance transmission in the field of data communication or telecom, which is compliant with 100G Ethernet transmission protocol and compatible with OTN OTU4 transmission protocol. It has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 30km (without FEC) or 40km (with FEC).

    The post 100G QSFP28 ER4 Lite DML LWDM4 SMF LC 30km/40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM DML uncooled transmitter and APD ROSA
  • Transmission rates of up to 25.78125Gbps or 27.95Gbps per channel
  • Built-in CDR circuitry for receive and transmit channels
  • Compliant with QSFP28 MSA, and 100GE Ethernet transport protocol
  • Optional multi-rate versions compatible with 100G Ethernet and OTN OTU4
  • Compatible with InfiniBand HDR transport protocols
  • Distance up to 30km (without FEC on) or 40km (with FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 3.8w
  • Dual LC optical connectors
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-100L4K40CL 100GE QSFP28 ER4 Lite DML LWDM4 30km/40km Optical Module
    FBG-112L4K40CL 100GE/OTU4 QSFP28 ER4 Lite DML LWDM4 30km/40km Optical Module

    The post 100G QSFP28 ER4 Lite DML LWDM4 SMF LC 30km/40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-er4-lite.html/feed 0     100G QSFP28 4WDM-40 DML CWDM4 30km/40km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-4wdm-40.html https://www.fiberstamp.com/100g-qsfp28-4wdm-40.html#respond Wed, 09 Aug 2023 02:15:23 +0000 https://www.fiberstamp.com/?post_type=product&p=9225 FIBERSTAMP 100G QSFP28 4WDM-40 optical transceiver is used for long distance interconnection in data centers and is compliant with 100G 4WDM-40 MSA specification. It has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 30km (without FEC on) or 40km (with FEC on).

    The post 100G QSFP28 4WDM-40 DML CWDM4 30km/40km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM DML uncooled transmitter and APD ROSA
  • Transmission rates of up to 25.78125Gbps per channel
  • Compliant with QSFP28 MSA and 100G 4WDM-40 MSA Ethernet transport protocol
  • Distance up to 30km (without FEC on) or 40km (with FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 3.8w
  • Dual LC optical connectors
  • Commercial and industrial grade operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-100L4K40C 100GE QSFP28 4WDM-40 DML LWDM4 30km/40km Optical Module
    FBG-100L4K40T Industrial-grade 100GE QSFP28 4WDM-40 DML LWDM4 30km/40km Optical Module

    The post 100G QSFP28 4WDM-40 DML CWDM4 30km/40km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-4wdm-40.html/feed 0