400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4
FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.
FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.
Description
Features
- Hot-plug QSFP56-DD and QSFP28form factor
- QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
- Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
- 8x 50Gb/s PAM4 modulation
- Low power dissipation <9W (400G End)
- Low power dissipation <4.5W (100G End)
- RoHS-6 compliant (lead-free)
- Commercial case temperature range of 0°C to 70°C
- Single 3.3V power supply
- Maximum link length of 70m on OM3 MMF
and 100m on OM4 & OM5 MMF - Uncooled 850nm VCSEL array (both End)
- PIN photo detector array (both End)
- 400GBASE-SR8 and 100GBASE-SR2 compliant
- I2C management interface
- CMIS V4.0 compliant
Applications
- IEEE 802.3cd 100GBASE-SR2 Ethernet (PAM4)
- IEEE 802.3cd 400GBASE-SR8 Ethernet (PAM4)
Additional Information
| Application | |
|---|---|
| Form Factor | |
| Product Type |
Related Products
-
-
-
-
-
-
-
-
-
-
AI&DC InterconnectFIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module
Read more
