OSFP - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 24 Apr 2026 10:01:36 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png OSFP - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 800G OSFP to RHS immersion cooling extender https://www.fiberstamp.com/800g-osfp-to-rhs-immersion-cooling-extender.html https://www.fiberstamp.com/800g-osfp-to-rhs-immersion-cooling-extender.html#respond Fri, 24 Apr 2026 09:58:30 +0000 https://www.fiberstamp.com/?post_type=product&p=14893 Description

FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP 800G OSFP to RHS immersion cooling extender (FSUE-RHS-801-DXX) is an important part of liquid immersion solution, this product include RHS extender cage, cable, OSFP contact three parts, the cable length can be customized no more than 0.3m, that can avoid the optical lens/engine/interface exposure to the liquid indirectly. In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins.

The post FIBERSTAMP 800G OSFP to RHS immersion cooling extender first appeared on FIBERSTAMP.

]]> Features

  • Compliant OSFP MSA
  • Typical insertion loss less 8dB@26.56GHz with 0.3m length
  • 100ohm differential impedance system
  • 3V power supply
  • I2C R/W function
  • Status indicators with LED
  • 3V/0.85W fan and heat sink for contact cooling
  • Low EMI radiation and crosstalk
  • RoHS compliant

Applications

  • Extend OSFP transceiver/AOC for liquid immersion link environment
  • OSFP to RHS extender and adapter
  • provide I2C R/W and some status indicators with LED

The post FIBERSTAMP 800G OSFP to RHS immersion cooling extender first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-to-rhs-immersion-cooling-extender.html/feed 0 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html#respond Mon, 08 Sep 2025 02:58:34 +0000 https://www.fiberstamp.com/?post_type=product&p=13809 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FWU4J-800xxxxxC cable connects data signals from each of the 16 pairs on the single OSFP end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP-MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug OSFP CTHS and QSFP112 form factor
  • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
  • Support up to 5m length
  • 100Ohm differential impedance system
  • 3V power supply & typical power consumption 3.5W
  • Commercial case temperature range of 0°C to 70°C
  • I2C management

Applications

  • Infiniband NDR/HDR/EDR
  • Switch / router / HBA
  • Enterprise network
  • Data Center Network
  • Data storage and communication industry

STANDARDS COMPLIANCE

  • IEEE P802.3ck D3.0
  • QSFP-DD MSA HW Rev 4.1
  • QSFP112 MSA HW Rev 6.01
  • CMIS 4.0
  • RoHS

The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html/feed 0 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html#respond Mon, 08 Sep 2025 02:46:30 +0000 https://www.fiberstamp.com/?post_type=product&p=13807 FIBERSTAMP’s 800G OSFP to 4x200G OSFP cable assembly splitter is effective alternative to fiber optics. The cable

connects data signals from each of the 16 pairs on the single OSFP end to the quad OSFP RHS ends, each pair

operates at data rates of up to 100Gb/s, each OSFP/OSFP RHS port can be addressed by EEPROM to provide

product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWU4U-800xxxxxC cable assembly splitter is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high

performance, lowest-cost &latency &power consumption I/O solutions for LAN, HPC and SAN. The high speed cable

assemblies meet and exceed 800 Gigabit Ethernet, InfiniBand EDR /HDR/NDR and temperature requirements for

performance and reliability.

The height of OSFP CTHS (Close Top Heat Sink) is fully compliant with OSFP finned top, OSFP RHS(Riding Heat Sink)

also can be called flat top, it’s a little bit lower than OSFP CTHS.

The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

]]> Features

 Hot-plug OSFP CTHS and OSFP RHS form factor

 Support 8x 50/100Gb/s PAM4 modulation

 Commercial case temperature range of 0°C to 70°C

 26 AWG ~30 AWG support up to 2m length above

 Contain EEPROM & programmable to customized

 

Applications

 Data storage and communication industry

 Switch / Router / HBA/NIC

 Enterprise network

 Data Center Network

 Infiniband

 

STANDARDS COMPLIANCE

 IEEE P802.3ck D3.0

 OSFP MSA HW Rev 4.1

 ROHS

 

The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html/feed 0 Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersion-800g-osfp-dr8.html https://www.fiberstamp.com/immersion-800g-osfp-dr8.html#respond Fri, 15 Aug 2025 06:50:24 +0000 https://www.fiberstamp.com/?post_type=product&p=13748 The FIBERSTAMP 800G OSFP DR8 is a transceiver module designed for optical communication applications of up to 500 m in liquid immersion environments. It is built on two core technological pillars—advanced silicon photonics chips and a state-of-the-art 5 nm DSP—working in synergy to deliver exceptional performance, efficiency, and integration.

Specifically engineered for liquid immersion, the module’s housing is sealed with a protective coating to prevent coolant ingress into the optical engine. Compared with other liquid-immersion optical solutions, this design incorporates a dedicated pressure test point for leakage detection, giving the sealing and testing process a unique advantage in manufacturing quality assurance.

Built to withstand the most demanding operating conditions, the module resists extreme temperatures, high humidity, and EMI interference. It also offers extensive functionality and feature integration, all accessible via a two-wire serial interface.

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • OSFP MSA and CMIS compliant
  • 25Gbps (53.125GBd PAM4) electrical interface
  • 25Gbps (53.125GBd PAM4) optics architecture
  • Power consumption <15W
  • Up to 500m G.652 SMF with KP-FEC
  • Support pluggable dual MPO-12 pigtails
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 800GBASE-DR8
    • AI/ML Application
    • Data center network
    • Especially design for liquid immersion environment

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersion-800g-osfp-dr8.html/feed 0 800G-CR8 (OSFP RHS) Active Copper Cable https://www.fiberstamp.com/800g-cr8-osfp-rhs-acc.html https://www.fiberstamp.com/800g-cr8-osfp-rhs-acc.html#respond Fri, 06 Jun 2025 09:32:47 +0000 https://www.fiberstamp.com/?post_type=product&p=13563 FIBERSTAMP’s OSFP RHS ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FZU-800-XXM02C cable connects data signals from each of the 16 pairs on the single OSFP RHS end to the other OSFP RHS end, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet 400Gigabit Ethernet, Infiniband requirements for performance and reliability.

The post 800G-CR8 (OSFP RHS) Active Copper Cable first appeared on FIBERSTAMP.

]]>
    • Features
      • Hot-plug OSFP RHS form factor
      • Support 8x 100Gb/s PAM4and NRZ
      • Support up to 5m length
      • 100Ohm differential impedance system
      • 3V power supply & typical power consumption 2.5W
      • Commercial case temperature range of 0°C to 70°C
      • I2C management

      Applications

      • Infiniband NDR/HDR/EDR
      • Switch / router / HBA
      • Enterprise network
      • Data Center Network
      • Data storage and communication industry

       

      STANDARDS COMPLIANCE

      • IEEE P802.3ck D3.0
      • OSFP MSA R4.1
      • CMIS 4.0
      • ROHS

    • The post 800G-CR8 (OSFP RHS) Active Copper Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-cr8-osfp-rhs-acc.html/feed 0     800G-CR8 (OSFP RHS) Direct Attach Cable https://www.fiberstamp.com/800g-cr8-osfp-rhs-pcc.html https://www.fiberstamp.com/800g-cr8-osfp-rhs-pcc.html#respond Fri, 06 Jun 2025 09:14:43 +0000 https://www.fiberstamp.com/?post_type=product&p=13560 FIBERSTAMP’s FWU-800-XXM02C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single OSFP RHS end to the other OSFP RHS end, each pair operates at data rates of up to 100Gb/s, each OSFP RHS port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface.

    FIBERSTAMP’s FWU-800-XXM02C cable assemblies is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 800Gigabit Ethernet, InfiniBand EDR /HDR and temperature requirements for performance and reliability.

    The post 800G-CR8 (OSFP RHS) Direct Attach Cable first appeared on FIBERSTAMP.

    ]]>
  • Features
    • Hot-plug OSFP RHS form factor
    • Support 8x 100/Gb/s PAM4 modulation
    • Commercial case temperature rangeof 0°C to 70°C
    • 26 AWG ~30 AWG support up to 2m length
    • Contain EEPROM &  programmable to customized

    Applications

    • Data storage and communication industry
    • Switch / router / HBA
    • Enterprise network
    • Data Center Network
    • Infiniband

     

    STANDARDS COMPLIANCE

    • IEEE 802.3ck D3.0
    • OSFP MSA HW Rev 4.1
    • ROHS

    • The post 800G-CR8 (OSFP RHS) Direct Attach Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-cr8-osfp-rhs-pcc.html/feed 0     SiPh 800G OSFP 2xLR4 CWDM 10km SMF 2xDuplex LC Optical Transceiver https://www.fiberstamp.com/800g-osfp-2xlr4.html https://www.fiberstamp.com/800g-osfp-2xlr4.html#respond Mon, 06 May 2024 07:47:46 +0000 https://www.fiberstamp.com/?post_type=product&p=11366 FIBERSTAMP 800G OSFP 2xLR4 Silicon Optical Module is a hot-pluggable optical transceiver module based on silicon photonics integration technology, designed for data center 800GBASE-2xLR4 Ethernet links, with 100G PAM4 and 2x4-way single-mode parallel technology, and supports 10km maximum transmission distance.

    The post SiPh 800G OSFP 2xLR4 CWDM 10km SMF 2xDuplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8-channel full-duplex transceiver integrated module in OSFP hot-pluggable package
  • Data rate up to 850Gbps
  • Compliant with QSFP MSA, CMIS 4.0 and 800G Ethernet transport protocols
  • Transmission using single fiber at distances up to 10km (with FEC on)
  • Dual duplex LC optical interfaces
  • Power consumption less than 18.5W
  • Supports CMIS version 4.0 protocol
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FUU-800P4K10C SiPh 800G OSFP 2xFR4 CWDM4 10km 2xDuplex LC Optical Transceiver

     

    The post SiPh 800G OSFP 2xLR4 CWDM 10km SMF 2xDuplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-2xlr4.html/feed 0     SiPh 800G OSFP 2xFR4 CWDM 2km SMF 2xDuplex LC Optical Transceiver https://www.fiberstamp.com/800g-osfp-2xfr4.html https://www.fiberstamp.com/800g-osfp-2xfr4.html#respond Mon, 06 May 2024 07:09:09 +0000 https://www.fiberstamp.com/?post_type=product&p=11357 FIBERSTAMP 800G OSFP 2xFR4 Silicon Optical Module is a hot-pluggable optical transceiver module based on silicon photonics integration technology, designed for data center 800GBASE-2xFR4 Ethernet links, with 100G PAM4 and 2x4-way single-mode parallel technology, and supports 2km maximum transmission distance.

    The post SiPh 800G OSFP 2xFR4 CWDM 2km SMF 2xDuplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8-channel full-duplex transceiver integrated module in OSFP hot-pluggable package
  • Data rate up to 850Gbps
  • Compliant with QSFP MSA, CMIS 4.0 and 800G Ethernet transport protocols
  • Transmission using single fiber at distances up to 2km (with FEC on)
  • Dual duplex LC optical interfaces
  • Power consumption less than 16W
  • Supports CMIS version 4.0 protocol
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FUU-800P4K02C SiPh 800G OSFP 2xFR4 CWDM4 2km 2xDuplex LC Optical Transceiver

     

    The post SiPh 800G OSFP 2xFR4 CWDM 2km SMF 2xDuplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-2xfr4.html/feed 0     SiPh 800G OSFP DR8++ 1310nm 10km SMF MPO Optical Transceiver https://www.fiberstamp.com/800g-osfp-dr8-10km.html https://www.fiberstamp.com/800g-osfp-dr8-10km.html#respond Mon, 04 Dec 2023 07:12:14 +0000 https://www.fiberstamp.com/?post_type=product&p=10444 FIBERSTAMP 800G OSFP DR8+ Silicon Optical Module is a hot-pluggable optical transceiver module based on silicon photonics integration technology, designed for data center 800GBASE-DR8 Ethernet links, with 100G PAM4 and 8-way single-mode parallel technology, and supports 10km maximum transmission distance.

    The post SiPh 800G OSFP DR8++ 1310nm 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8-channel full-duplex transceiver integrated module in OSFP hot-pluggable package
  • Data rate up to 850Gbps
  • Compliant with QSFP MSA, CMIS 4.0 and 800G Ethernet transport protocols
  • Transmission using single fiber at distances up to 10km (with FEC on)
  • Dual MPO-12 optical interfaces
  • Power consumption less than 18.5W
  • Supports CMIS version 4.0 protocol
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FUU-800P4K10C SiPh 800G OSFP DR8 1310nm 10km Optical Transceiver

    The post SiPh 800G OSFP DR8++ 1310nm 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-dr8-10km.html/feed 0     SiPh 800G OSFP DR8 1310nm 500m SMF MPO Optical Transceiver https://www.fiberstamp.com/800g-osfp-dr8.html https://www.fiberstamp.com/800g-osfp-dr8.html#respond Mon, 04 Dec 2023 06:58:22 +0000 https://www.fiberstamp.com/?post_type=product&p=10439 FIBERSTAMP 800G OSFP DR8 Silicon Optical Module is a hot-pluggable optical transceiver module based on silicon photonics integration technology, designed for data center 800GBASE-DR8 Ethernet links, with 100G PAM4 and 8-way single-mode parallel technology, and supports 500m maximum transmission distance.

    The post SiPh 800G OSFP DR8 1310nm 500m SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

      • OSFP MSA and CMIS compliant
      • 25Gbps (53.125GBd PAM4) electrical interface
      • 25Gbps (53.125GBd PAM4) optics architecture
      • Power consumption <15W
      • Up to500m G.652 SMF with KP-FEC
      • Dual MPO-12 receptacles
      • Built-in digital diagnostic functions
      • Operating case temperature 0°C to +70°C
      • 3V power supply voltage
      • RoHS compliant (lead free)

    Applications

    • 800GBASE-DR8
    • AI/ML Application
    • Datacenter network
    P/N Description
    FUU-800P4M50C SiPh 800G OSFP DR8 1310nm 500m Optical Transceiver

     

    Application

    SiPh 800G OSFP DR8 to SiPh 400G OSFP-RHS DR4/400G QSFP112 DR4 Breakout Solution

    The post SiPh 800G OSFP DR8 1310nm 500m SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-dr8.html/feed 0