Telecom - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 27 Mar 2026 10:14:02 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Telecom - FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:53:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14840 FIBERSTAMP’s FYLU-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP112 port has integrate 4 independent transmit and receive channels and uses QSFP112 MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP112 MSA.

The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug OSFP-RHS and QSFP112 form factor
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • 4 channels 850nm VCSEL array(both End)
  • 4 channels PIN photo detector array(both End)
  • Power consumption <8W
  • Compliant to OSFP&QSFP112 MSA and CMIS4.0
  • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

 

Applications

  • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html/feed 0 FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:17:44 +0000 https://www.fiberstamp.com/?post_type=product&p=14837 FIBERSTAMP’s FYLU-400M50C MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP-DD port has integrate 4 independent transmit and receive channels and uses QSFP-DD MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP-DD MSA.

The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug OSFP-RHS and QSFPDD form factor
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • 4 channels 850nm VCSEL array(both End)
  • 4 channels PIN photo detector array(both End)
  • Power consumption <8W
  • Compliant to OSFP&QSFP-DD MSA and CMIS4.0
  • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 10°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

 

Applications

  • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html/feed 0 FIBERSTAMP 53G SFP56 Active Optical Cable https://www.fiberstamp.com/53g-sfp56-aoc.html-2 https://www.fiberstamp.com/53g-sfp56-aoc.html-2#respond Mon, 23 Mar 2026 07:56:49 +0000 https://www.fiberstamp.com/?post_type=product&p=14829 The FIBERSTAMP FYD-E50M100C is a single-Channel Active Optical Cable for 26.5625GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

]]> Features

  • full-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 53Gbps PAM4 transmitter and PAM4 receiver
  • 850nm VCSEL array
  • PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <2W
  • Hot Pluggable SFP form factor and Compliant with SFF-8431,SFF-8472
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS 6 compliant(lead free)

 

Applications

  • IEEE 802.3cd 50GBASE-SR

The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/53g-sfp56-aoc.html-2/feed 0 100G QSFP28 SWDM4 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-swdm4.html https://www.fiberstamp.com/100g-qsfp28-swdm4.html#respond Thu, 22 Jan 2026 08:00:10 +0000 https://www.fiberstamp.com/?post_type=product&p=14380 The FIBERSTAMP 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multi-mode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions  are available via an I2C interface, as specified by the QSFP28 MSA.

The post 100G QSFP28 SWDM4 Optical Transceiver first appeared on FIBERSTAMP.

]]> Feature

  • Compliant with QSFP28 MSA
  • Compliant with SWDM MSA
  • Compliant with IEEE802.3bm CAUI-4
  • Hot-pluggable QSFP28 form factor
  • 4x25Gb/s 850mm VCSEL-based transmitter
  • Supports 103.1Gbps aggregate bit rate
  • Power dissipation<3.5W
  • Maximum link length of 150m on OM5 multimode Fiber
  • Case temperature range of 0°C to 70°C
  • Duplex LC receptacles
  • CAUI-4 electrical interface
  • RoHS compliant

 

Applications

  • 100G Ethernet over Duplex MMF

The post 100G QSFP28 SWDM4 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-qsfp28-swdm4.html/feed 0 FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module https://www.fiberstamp.com/400g-qsfpdd-er8.html https://www.fiberstamp.com/400g-qsfpdd-er8.html#respond Thu, 18 Sep 2025 09:24:25 +0000 https://www.fiberstamp.com/?post_type=product&p=13829 FIBERSTAMP's 400G QSFP-DD ER8 module is designed for 40 km optical communication applications, and it is compliant to IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA compliant
  • Compliant to IEEE 802.3bs 400GBASE-ER8
  • Digital diagnostic monitoring support
  • Hot pluggable 76 pin electrical interface
  • 8 LAN-WDM lanes MUX/DEMUX design
  • 53.125 Gbps PAM4 Channel Electrical Serial
  • Interface (400GAUI-8)
  • Maximum power consumption 15.4 W
  • LC duplex connector
  • Supports 425 Gb ps bit rate
  • Up to 40 km transmission on single mode fiber
  • Operating case temperature: 0 。C to 70 。C
  • Single 3.3 V power supply
  • RoHS 2 compliant

Applications

  • 400GBASE-ER8 Ethernet
  • Telecom networking
  • Data Center Interconnect

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfpdd-er8.html/feed 0 FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-er4.html https://www.fiberstamp.com/200g-qsfpdd-er4.html#respond Thu, 18 Sep 2025 09:17:56 +0000 https://www.fiberstamp.com/?post_type=product&p=13826 FIBERSTAMP’s 200GE QSFP-DD ER4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 40km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-ER4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDMcooled EML transmitter
    • 4 channels APD receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 40km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-ER4 Ethernet
    • Telecom networking
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-er4.html/feed 0     10G SFP+ Hardened Active Optical Cables https://www.fiberstamp.com/10g-sfp-haoc.html https://www.fiberstamp.com/10g-sfp-haoc.html#respond Wed, 27 Aug 2025 02:00:13 +0000 https://www.fiberstamp.com/?post_type=product&p=13776 FIBERSTAMP 10G SFP+ Hardened Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.

    FIBERSTAMP SFP+ Hardened Active Optical Cables is made of hardened optical cable structure with stainless steel metal tube, Kevlar strenthen and LSZH Jacket ,support up to 300 meters on OM3 MMF, it’s specially for outstanding long term reliability and harsh environment tolerance.

    The post 10G SFP+ Hardened Active Optical Cables first appeared on FIBERSTAMP.

    ]]>     Features

    • Supports SFF8431/SFF8432/SFF8472,I2C management interface
    • Hot PluggableSFP+ form factor, supports 10Gbps data rate
    • 850nm VCSEL transmitter, PIN photo-detectorreceiver
    • Up to 300m on OM3 MMF
    • Operating case temperature: -40to 85℃
    • All-metal housing for superior EMI performance
    • RoHS compliant (lead free)
    • Hardened active optical cable with metal tube and Kevlar strengthen

    Applications

    • 10 Gigabit Ethernet
    • 4G and 8G Fiber Channel Applications
    • 1x InfiniBand QDR,DDR, SDR
    • High-performance computing clusters
    • Servers, switches, storage and host card adapters

    The post 10G SFP+ Hardened Active Optical Cables first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/10g-sfp-haoc.html/feed 0     25Gbps SFP28 Hardened Active Optical Cable https://www.fiberstamp.com/25g-sfp28-haoc.html https://www.fiberstamp.com/25g-sfp28-haoc.html#respond Tue, 26 Aug 2025 09:03:14 +0000 https://www.fiberstamp.com/?post_type=product&p=13773 FIBERSTAMP 25Gbps SFP28 Hardened Active Optical Cables (HAOCs) are direct-attach fiber assemblies with SFP28 connectors, designed for short-reach interconnects. Featuring a hardened optical cable construction, they provide a cost-effective solution for connections within racks and between adjacent racks.

    Each FIBERSTAMP SFP28 HAOC is built with a stainless steel tube, Kevlar reinforcement, and an LSZH jacket, supporting distances of up to 70 meters over OM3 multimode fiber. Engineered for long-term reliability and resistance to harsh environments, these cables deliver outstanding performance in demanding applications.

    The post 25Gbps SFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     Features
    ▪ Supports SFF8431/SFF8432/SFF8472,I2C management interface
    ▪ Hot-pluggable SFP28 form factor , supports 25Gbps data rate
    ▪ Maximum link length of 70m on OM3 MMF
    ▪ 850nm VCSEL laser and PIN photo-detector ▪ Internal CDR on both Transmitter and Receiver channel ▪ Single 3.3V power supply
    ▪ Power dissipation < 1W
    ▪ RoHS compliant ▪ Commercial case temperature range: -40°C to +85°C
    ▪ Hardened active optical cable with metal tube and Kevlar strengthen

    Applications
    ▪ 25 Gigabit Ethernet ▪ EDR Infiniband
    ▪ High-performance computing clusters
    ▪ Servers, switches, storage and host card adapters

    The post 25Gbps SFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/25g-sfp28-haoc.html/feed 0     100G QSFP28 Hardened Active Optical Cable https://www.fiberstamp.com/100g-qsfp28-haoc.html-2 https://www.fiberstamp.com/100g-qsfp28-haoc.html-2#respond Tue, 26 Aug 2025 03:38:29 +0000 https://www.fiberstamp.com/?post_type=product&p=13768 The FIBERSTAMP Technologies 100G QSFP28 HAOC is a four-channel, pluggable, parallel fiber-optic transceiver designed for 100G or 40G Ethernet and InfiniBand FDR/EDR applications. This high-performance module is ideal for short-range, multi-lane data communications and interconnect deployments.

    Built with a ruggedized optical cable structure featuring a stainless steel tube, Kevlar reinforcement, and an LSZH jacket, delivering reliable performance over distances of up to 70 meters on OM3 multimode fiber. Engineered for long-term durability and resistance to harsh environments, it ensures superior reliability for demanding applications.

    The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     Features

    ▪ 4 channels full-duplex transceiver modules
    ▪ Transmission data rate up to 25Gbps per channel ▪ Support 40GE and 56G FDR data rate
    ▪ 4 channels 850nm VCSEL array
    ▪ 4 channels PIN photo detector array
    ▪ Internal CDR circuits on both receiver and transmitter channels
    ▪ Support CDR bypass
    ▪ Low power consumption <2W
    ▪ Hot Pluggable QSFP form factor ▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF)
    ▪ Single MPO connector receptacle
    ▪ Operating case temperature -40°C to +85°C
    ▪ 3.3V power supply voltage
    ▪ RoHS compliant(lead-free)
    ▪ Hardened active optical cable with metal tube and Kevlar strengthen

    Applications

    ▪ IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
    ▪ Infiniband FDR/EDR

    The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-haoc.html-2/feed 0     FIBERSTAMP 100G-DWDM1 QSFP28 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-dwdm1-o-band.html https://www.fiberstamp.com/100g-qsfp28-dwdm1-o-band.html#respond Tue, 22 Jul 2025 08:19:13 +0000 https://www.fiberstamp.com/?post_type=product&p=13634 FIBERSTAMP 100G-DWDM1 QSFP28 is optical transceiver designed for using in 100-Gigabit Ethernet links up to 10km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA , 100G Lambda MSA 100G-LR Specification and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA. It integrates 4 data lanes in each direction with 4×25.78125Gb/s bandwidth. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Duplex LC connector. This module incorporates FIBERSTAMP proven circuit and Silicon Photonics technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 100G-DWDM1 QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Features
    • Supports 100Gbps
    • Fixed O-Band DWDM 200GHz 16 Channels(wavelengths)
    • 78125Gbit/s NRZ electrical interface(CAUI-4)
    • 25Gb/sPAM4 based on Silicon Photonics
    • 100G Lambda MSA 100G-LR Specification Compliant
    • 5W maximum power dissipation
    • Hot-pluggable QSFP28 form factor
    • Maximum link length of 10km on G.652 SMF with KP-FEC
    • Duplex LC receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • RoHS compliant (lead free)

     

    Applications

    • 100G Ethernet
    • Data center
    • P/N & Data Sheet Description
    FTG-100x4K25C 100GE QSFP28 DWDM1 QSFP28 Optical Transceiver

    The post FIBERSTAMP 100G-DWDM1 QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-dwdm1-o-band.html/feed 0