<100m – FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Mon, 30 Mar 2026 09:53:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png <100m – FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html#respond Mon, 30 Mar 2026 09:39:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14848 FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.

FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug QSFP56-DD and QSFP28form factor
  • QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
  • Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
  • 8x 50Gb/s PAM4 modulation
  • Low power dissipation <9W (400G End)
  • Low power dissipation <4.5W (100G End)
  • RoHS-6 compliant (lead-free)
  • Commercial case temperature range of 0°C to 70°C
  • Single 3.3V power supply
  • Maximum link length of 70m on OM3 MMF
    and 100m on OM4 & OM5 MMF
  • Uncooled 850nm VCSEL array (both End)
  • PIN photo detector array (both End)
  • 400GBASE-SR8 and 100GBASE-SR2 compliant
  • I2C management interface
  • CMIS V4.0 compliant

 

Applications

  • IEEE 802.3cd&nbsp100GBASE-SR2 Ethernet (PAM4)
  • IEEE 802.3cd&nbsp400GBASE-SR8 Ethernet (PAM4)

The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html/feed 0 FIBERSTAMP 53G SFP56 Active Optical Cable https://www.fiberstamp.com/53g-sfp56-aoc.html-2 https://www.fiberstamp.com/53g-sfp56-aoc.html-2#respond Mon, 23 Mar 2026 07:56:49 +0000 https://www.fiberstamp.com/?post_type=product&p=14829 The FIBERSTAMP FYD-E50M100C is a single-Channel Active Optical Cable for 26.5625GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

]]> Features

  • full-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 53Gbps PAM4 transmitter and PAM4 receiver
  • 850nm VCSEL array
  • PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <2W
  • Hot Pluggable SFP form factor and Compliant with SFF-8431,SFF-8472
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS 6 compliant(lead free)

 

Applications

  • IEEE 802.3cd 50GBASE-SR

The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/53g-sfp56-aoc.html-2/feed 0 FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr2.html https://www.fiberstamp.com/100g-qsfp28-sr2.html#respond Mon, 01 Dec 2025 09:49:17 +0000 https://www.fiberstamp.com/?post_type=product&p=14163 The FIBERSTAMP 100G SR2 QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE 802.3cd and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

The module incorporates 2 channels 850nm VCSEL Array and PIN photo detector array. This results in an aggregate bandwidth of 100Gbps into a MPO cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

]]> Features

  • QSFP28 module form factor
  • Support QSFP28 SFF-8436/8636
  • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
  • 78125Gbps NRZ retimed electrical I/O
  • 2 channels 850nm VCSEL Array and PIN photo detector array
  • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
  • Single MPO12/APCreceptacle(Only use channel 1 and channel 2)
  • Maximum link length of 100m OM4,70m OM3(DSP KP4-FEC is ON)
  • Built-in digital diagnostic functions
  • Operating case temperature range: 0 to 70°C
  • Single 3.3V power supply
  • Low power consumption < 4W
  • RoHS compliant (lead free)

 

Applications

    • 100G SR2（2x 50G PAM4）applications
    • High-speed interconnects within and between switches, routers and transport equipment
    • Server-server clusters, super-computing interconnections
    • Proprietary backplanes
    • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
P/N Description
FEG-100S2M10C 100GE QSFP28 SR2 Optical Transceiver

The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-qsfp28-sr2.html/feed 0 FIBERSTAMP 100G SFP112 SR1 Optical Transceiver https://www.fiberstamp.com/100g-sfp112-sr1.html https://www.fiberstamp.com/100g-sfp112-sr1.html#respond Wed, 29 Oct 2025 10:00:51 +0000 https://www.fiberstamp.com/?post_type=product&p=13865 The FIBERSTAMP Technologies 100G SFP112 SR1 is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]> Features

  • Full-duplex transceiver modules
  • 53.125GBdPAM4 transmitter and PAM4 receiver
  • 850nm VCSEL and PIN receiver
  • Internal DSPon both receiver and transmitter channels
  • Power consumption <2.1W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Up to 100m transmission distance on OM4/OM5 MMF with FEC
  • DuplexLC/APC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS 6 compliant(lead free)

 

Applications

    • IEEE 802.3db100GBASE-SR1

The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-sfp112-sr1.html/feed 0 FIBERSTAMP 100G QSFP28 SR1 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr1.html https://www.fiberstamp.com/100g-qsfp28-sr1.html#respond Fri, 27 Jun 2025 09:50:05 +0000 https://www.fiberstamp.com/?post_type=product&p=13609 The FIBERSTAMP 100G QSFP28 SR1 is a single-Channel, Pluggable, Fiber-Optic QSFP28 for 106.25Gbps PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. It is compliant with the QSFP28 MSA ,100GBASE-SR1 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm.The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

  1. KR-FEC is optional, please contact us if necessary.

The post FIBERSTAMP 100G QSFP28 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Features
    • Full-duplex transceiver modules
    • 78125Gbps NRZ electrical interface(CAUI-4)
    • 25GbpsPAM4 transmitter and PAM4 receiver
    • 850nm VCSEL and PIN receiver
    • Internal DSP on both receiver and transmitter channels
    • Power consumption <5W
    • Hot Pluggable QSFP28form factor
    • Up to 100m transmission distance on OM4/OM5 MMF with FEC
    • Duplex LC/APCconnector
    • Built-in digital diagnostic functions
    • Operating case temperature:0°C to +70°C
    • +3V power supply
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3db100GBASE-SR1
    • P/N Description
    FEG-100S1M10C 100G QSFP28 SR1 Optical Transceiver

    The post FIBERSTAMP 100G QSFP28 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-sr1.html/feed 0     200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-sr2.html https://www.fiberstamp.com/200g-qsfp56-sr2.html#respond Thu, 19 Jun 2025 08:22:45 +0000 https://www.fiberstamp.com/?post_type=product&p=13600 The FIBERSTAMP 200G QSFP56 SR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M10C 200GE QSFP56 SR2 (4x53G PAM4 to 2x106G PAM4) 100m Optical Modules

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-sr2.html/feed 0     100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC https://www.fiberstamp.com/100g-bidi-sr1.2-qsfp28.html https://www.fiberstamp.com/100g-bidi-sr1.2-qsfp28.html#respond Thu, 10 Aug 2023 07:13:38 +0000 https://www.fiberstamp.com/?post_type=product&p=9353 The FIBERSTAMP 100G BIDI SR QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE802.3cm-2020 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

    The module incorporates 2 channels 850nm/910nm VCSEL and PIN photo detector, transmitting and receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 100Gbps into a duplex LC cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

    The post 100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP28 module form factor
    • Support QSFP28 SFF-8436/8636
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • Bandwidth density of 100Gbps bi-directional
    • 2 channels 850nm/910nm VCSEL and PIN photo detector
    • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Duplex LC connector
    • Maximum link length of 100m OM4,70m OM3
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • Low power consumption < 4W
    • RoHS compliant (lead free)

    Applications

      • 100G SR BD applications
      • High-speed interconnects within and between switches, routers and transport equipment
      • Server-server clusters, super-computing interconnections
      • Proprietary backplanes
      • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
    P/N Description
    FBG-100B2M10C 100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC

    The post 100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-bidi-sr1.2-qsfp28.html/feed 0