SR8 - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 29 Jul 2026 08:43:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png SR8 - FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2#respond Wed, 29 Jul 2026 07:54:15 +0000 https://www.fiberstamp.com/?post_type=product&p=15292 FIBERSTAMP immersion 400G QSFP-DD SR8 is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with FEC, the optical interface is pluggable MPO16 pigtail.

It’s suitable for immersion environment, the internal optics are covered and protected with special technique to prevent cooling liquid leakage.

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 8x53Gbps PAM4 transmitter and PAM4 receiver
  • 8 channels 850nm VCSEL array
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <8.5W
  • Hot Pluggable QSFP DD form factor and Compliant with CMIS
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 pigtail
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3cd 200GBASE-SR4
  • Especially design for liquid immersion environment

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2/feed 0 Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2#respond Thu, 23 Jul 2026 10:14:07 +0000 https://www.fiberstamp.com/?post_type=product&p=15270 FIBERSTAMP immersion 800G QSFP-DD SR8 Optical Transceiver Module is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications in liquid immersion environment. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses pluggable MPO16 pigtail. The Common Management Interface Specification (CMIS) for QSFP-DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <13.5W
  • Hot Pluggable QSFP-DD form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 APC pigtail with customized length
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS  compliant(lead free)
  • Pluggable MPO16 pigtail

 

Applications

  • IEEE 802.3db 2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2/feed 0 Immersion 400G OSFP SR8 850nm 100m(328ft) Optical Transceivers https://www.fiberstamp.com/immersible-400g-osfp-sr8.html https://www.fiberstamp.com/immersible-400g-osfp-sr8.html#respond Thu, 17 Aug 2023 07:29:27 +0000 https://www.fiberstamp.com/?post_type=product&p=9537 FIBERSTAMP 400G OSFP SR8 liquid-cooled optical module is designed for immersive data center 400GBASE-SR8 Ethernet links. It utilizes 50G PAM4 and VCSEL technology and, with the FEC enabled, can achieve 400Gbps data interconnection over 8 pairs of multimode optical fibers within a distance up to 100 meters.

The post Immersion 400G OSFP SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

]]>
  • Utilizes hot-pluggable OSFP form factor
  • 8-channel full-duplex integrated transceiver module
  • Speed of up to 400Gbps
  • Compliant with OSFP MSA and IEEE 802.3cm 400GBASE-SR8 Ethernet standards
  • 8-channel 50Gb/s PAM4 850nm VCSEL transmitters and PIN receivers
  • Embedded DSP chips in both receive and transmit channels
  • With FEC enabled, can achieve a maximum transmission distance of up to 100m over multimode fibers
  • MPO pigtail fiber
  • Commercial-grade operating temperature range from 0 to 60 degrees Celsius
  • Power supply voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)

    • The post Immersion 400G OSFP SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-400g-osfp-sr8.html/feed 0     Immersion 400G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html#respond Thu, 17 Aug 2023 07:20:43 +0000 https://www.fiberstamp.com/?post_type=product&p=9536 FIBERSTAMP 400G QSFP-DD SR8 liquid-cooled optical module is designed for immersive data center 400GBASE-SR8 Ethernet links. It utilizes 50G PAM4 and VCSEL technology and, with the FEC enabled, can achieve 400Gbps data interconnection over 8 pairs of multimode optical fibers within a distance up to 100 meters.

    The post Immersion 400G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>
  • Utilizes hot-pluggable QSFP-DD form factor
  • 8-channel full-duplex integrated transceiver module
  • Speed of up to 400Gbps
  • Compliant with QSFP-DD MSA and IEEE 802.3cm 400GBASE-SR8 Ethernet standards
  • 8-channel 50Gb/s PAM4 850nm VCSEL transmitters and PIN receivers
  • Embedded DSP chips in both receive and transmit channels
  • With FEC enabled, can achieve a maximum transmission distance of up to 100m over multimode fibers
  • MPO pigtail fiber
  • Commercial-grade operating temperature range from 0 to 60 degrees Celsius
  • Power supply voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)

    • The post Immersion 400G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html/feed 0     Immersion 800G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html#respond Thu, 17 Aug 2023 06:53:35 +0000 https://www.fiberstamp.com/?post_type=product&p=9533 FIBERSTAMP 800G QSFP-DD SR8 immersible cooling optical transceiver module is designed for immersive data center 800GBASE-SR8 Ethernet links, employing 100G PAM4 and VCSEL technology. With FEC on, it can achieve 800Gbps data interconnect within 100m using 8 pairs of multimode optical fibers.

    The post Immersion 800G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>
  • Utilizes hot-pluggable QSFP-DD form factor
  • 8-channel full-duplex integrated transceiver module
  • Speed of up to 800Gbps
  • Compliant with QSFP-DD MSA and IEEE 802.3cm 800GBASE-SR8 Ethernet standards
  • 8-channel 100Gb/s PAM4 850nm VCSEL transmitters and PIN receivers
  • Embedded DSP chips in both receive and transmit channels
  • With FEC enabled, can achieve a maximum transmission distance of up to 100m over multimode fibers
  • MPO pigtail fiber
  • Commercial-grade operating temperature range from 0 to 60 degrees Celsius
  • Power supply voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)

    • The post Immersion 800G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html/feed 0     Immersion 800G OSFP112 SR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersible-800g-osfp-sr8.html https://www.fiberstamp.com/immersible-800g-osfp-sr8.html#respond Wed, 16 Aug 2023 08:46:34 +0000 https://www.fiberstamp.com/?post_type=product&p=9515 FIBERSTAMP 800G OSFP SR8 immersible cooling optical transceiver is a Eight-Channel, OSFP Form Pluggable, Parallel, Fiber-Optic for 800 Gigabit Ethernet Applications in liquid immersion environment. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses dual 12 fiber pluggable APC MPO pigtail. The Common Management Interface Specification (CMIS) for OSFP modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post Immersion 800G OSFP112 SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

    ]]>     Features

    • 8 channelsfull-duplex transceiver modules
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • 8 channels 850nm VCSEL array
    • 8 channels PIN photo detector array
    • Internal CDR circuits on both receiver and transmitter channels
    • Power consumption <13.5W
    • Hot Pluggable OSFP form factor and Compliant with CMIS
    • Maximum link length of 60m on OM3 Multimode Fiber and 100m on OM4 with FEC
    • Dual male MPO12 APC pigtail
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

      • IEEE 802.3db&nbsp2 x 400GBASE-SR4 Ethernet (PAM4)
      • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.
      • Especially design for liquid immersion environment

    The post Immersion 800G OSFP112 SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-800g-osfp-sr8.html/feed 0     200G QSFP-DD VCSEL SR8 850nm 100m MMF MPO Optical Transceiver https://www.fiberstamp.com/200g-qsfp-dd-sr8.html https://www.fiberstamp.com/200g-qsfp-dd-sr8.html#respond Fri, 04 Aug 2023 09:33:26 +0000 https://www.fiberstamp.com/?post_type=product&p=9183 FIBERSTAMP 200G QSFP-DD SR8 optical transceiver modules are used for short-range interconnections between devices within data centers and are compliant with 200G Ethernet transport protocols, as well as compatible with 8x10G/25G Ethernet and InfiniBand QDR/EDR transport protocols. The series use 8 pairs of parallel multimode fiber for transmission with a center wavelength of 850nm and distances up to 70m (OM3) or 100m (OM4) with optional industrial grade operating temperature range.

    The post 200G QSFP-DD VCSEL SR8 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP-DD form factor
  • 8-channel 850nm VCSEL and PIN
  • Transmission rate up to 25.78125Gbps per channel
  • Built-in CDR circuitry for receive and transmit channels, supporting CDR bypass
  • Compliant with QSFP-DD MSA, CMIS, 100G PSM MSA specification and 200G Ethernet transport protocol
  • Compatible with 8x10G/25G Ethernet and InfiniBand QDR/EDR transport protocols
  • Uses 8 pairs of parallel multimode fiber for transmission over distances up to 70m (OM3) or 100m (OM4)
  • Power consumption less than 4W
  • MPO24/PC optical connectors
  • Commercial and industrial grade operating temperature range selectable
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FEL-200S8M10C 200GE QSFP28 SR4 VCSEL 850nm 100m Optical Module
    FEL-200S8M10T Industrial Grade 200GE QSFP28 SR4 VCSEL 850nm 100m Optical Module

    The post 200G QSFP-DD VCSEL SR8 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr8.html/feed 0     800G OSFP SR8 VCSEL 850nm 100m MMF MPO Optical Transceiver https://www.fiberstamp.com/800g-osfp-sr8.html https://www.fiberstamp.com/800g-osfp-sr8.html#respond Fri, 04 Aug 2023 06:31:56 +0000 https://www.fiberstamp.com/?post_type=product&p=9155 FIBERSTAMP 800G OSFP SR8 is a hot-pluggable optical transceiver module designed for 800G SR8 Ethernet links in data centers. It adopts 100G PAM4 and VCSEL technology and can realize 800G data exchange within 100m.

    The post 800G OSFP SR8 VCSEL 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features
    ▪ 8 channels full-duplex transceiver modules
    ▪ Transmission data rate up to 106.25G per channel
    ▪ 8×106.25Gbps PAM4 transmitter and PAM4 receiver
    ▪ 8 channels 850nm VCSEL array
    ▪ 8 channels PIN photo detector array
    ▪ Internal CDR circuits on both receiver and transmitter channels
    ▪ Power consumption <13.5W
    ▪ Hot Pluggable OSFP form factor and Compliant with CMIS
    ▪ Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    ▪ Dual MPO12 APC connector receptacle
    ▪ Built-in digital diagnostic functions
    ▪ Operating case temperature 0°C to +70°C
    ▪ 3.3V power supply voltage
    ▪ RoHS compliant(lead free)

    Applications
    ▪ IEEE 802.3db 2 x 400GBASE-SR4 Ethernet (PAM4)
    ▪ The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    P/N Description
    FUU-800S8M10C 800GE OSFP SR8 VCSEL 850nm 100m Optical Transceiver Modules（2×MPO12）

     

    Application

    800G OSFP SR8 to 2x400G OSFP-RHS SR4/400G QSFP112 SR4 Breakout Solution

    The post 800G OSFP SR8 VCSEL 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-sr8.html/feed 0