Dual LC - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 22 Jan 2026 08:38:57 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Dual LC - FIBERSTAMP https://www.fiberstamp.com 32 32 100G QSFP28 SWDM4 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-swdm4.html https://www.fiberstamp.com/100g-qsfp28-swdm4.html#respond Thu, 22 Jan 2026 08:00:10 +0000 https://www.fiberstamp.com/?post_type=product&p=14380 The FIBERSTAMP 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multi-mode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions  are available via an I2C interface, as specified by the QSFP28 MSA.

The post 100G QSFP28 SWDM4 Optical Transceiver first appeared on FIBERSTAMP.

]]> Feature

  • Compliant with QSFP28 MSA
  • Compliant with SWDM MSA
  • Compliant with IEEE802.3bm CAUI-4
  • Hot-pluggable QSFP28 form factor
  • 4x25Gb/s 850mm VCSEL-based transmitter
  • Supports 103.1Gbps aggregate bit rate
  • Power dissipation<3.5W
  • Maximum link length of 150m on OM5 multimode Fiber
  • Case temperature range of 0°C to 70°C
  • Duplex LC receptacles
  • CAUI-4 electrical interface
  • RoHS compliant

 

Applications

  • 100G Ethernet over Duplex MMF

The post 100G QSFP28 SWDM4 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-qsfp28-swdm4.html/feed 0 FIBERSTAMP 100G SFP112 SR1 Optical Transceiver https://www.fiberstamp.com/100g-sfp112-sr1.html https://www.fiberstamp.com/100g-sfp112-sr1.html#respond Wed, 29 Oct 2025 10:00:51 +0000 https://www.fiberstamp.com/?post_type=product&p=13865 The FIBERSTAMP Technologies 100G SFP112 SR1 is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]> Features

  • Full-duplex transceiver modules
  • 53.125GBdPAM4 transmitter and PAM4 receiver
  • 850nm VCSEL and PIN receiver
  • Internal DSPon both receiver and transmitter channels
  • Power consumption <2.1W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Up to 100m transmission distance on OM4/OM5 MMF with FEC
  • DuplexLC/APC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS 6 compliant(lead free)

 

Applications

    • IEEE 802.3db100GBASE-SR1

The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-sfp112-sr1.html/feed 0 FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module https://www.fiberstamp.com/400g-qsfpdd-er8.html https://www.fiberstamp.com/400g-qsfpdd-er8.html#respond Thu, 18 Sep 2025 09:24:25 +0000 https://www.fiberstamp.com/?post_type=product&p=13829 FIBERSTAMP's 400G QSFP-DD ER8 module is designed for 40 km optical communication applications, and it is compliant to IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA compliant
  • Compliant to IEEE 802.3bs 400GBASE-ER8
  • Digital diagnostic monitoring support
  • Hot pluggable 76 pin electrical interface
  • 8 LAN-WDM lanes MUX/DEMUX design
  • 53.125 Gbps PAM4 Channel Electrical Serial
  • Interface (400GAUI-8)
  • Maximum power consumption 15.4 W
  • LC duplex connector
  • Supports 425 Gb ps bit rate
  • Up to 40 km transmission on single mode fiber
  • Operating case temperature: 0 。C to 70 。C
  • Single 3.3 V power supply
  • RoHS 2 compliant

Applications

  • 400GBASE-ER8 Ethernet
  • Telecom networking
  • Data Center Interconnect

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfpdd-er8.html/feed 0 FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-er4.html https://www.fiberstamp.com/200g-qsfpdd-er4.html#respond Thu, 18 Sep 2025 09:17:56 +0000 https://www.fiberstamp.com/?post_type=product&p=13826 FIBERSTAMP’s 200GE QSFP-DD ER4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 40km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-ER4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDMcooled EML transmitter
    • 4 channels APD receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 40km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-ER4 Ethernet
    • Telecom networking
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-er4.html/feed 0     FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-lr4.html https://www.fiberstamp.com/200g-qsfpdd-lr4.html#respond Thu, 18 Sep 2025 08:16:01 +0000 https://www.fiberstamp.com/?post_type=product&p=13823 FIBERSTAMP’s 200G QSFP-DD LR4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 10km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-LR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDM cooled EML transmitter
    • 4 channels PIN photo detector array receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 10km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-LR4 Ethernet
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-lr4.html/feed 0     100G QSFP28 Hardened Active Optical Cable https://www.fiberstamp.com/100g-qsfp28-haoc.html-2 https://www.fiberstamp.com/100g-qsfp28-haoc.html-2#respond Tue, 26 Aug 2025 03:38:29 +0000 https://www.fiberstamp.com/?post_type=product&p=13768 The FIBERSTAMP Technologies 100G QSFP28 HAOC is a four-channel, pluggable, parallel fiber-optic transceiver designed for 100G or 40G Ethernet and InfiniBand FDR/EDR applications. This high-performance module is ideal for short-range, multi-lane data communications and interconnect deployments.

    Built with a ruggedized optical cable structure featuring a stainless steel tube, Kevlar reinforcement, and an LSZH jacket, delivering reliable performance over distances of up to 70 meters on OM3 multimode fiber. Engineered for long-term durability and resistance to harsh environments, it ensures superior reliability for demanding applications.

    The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     Features

    ▪ 4 channels full-duplex transceiver modules
    ▪ Transmission data rate up to 25Gbps per channel ▪ Support 40GE and 56G FDR data rate
    ▪ 4 channels 850nm VCSEL array
    ▪ 4 channels PIN photo detector array
    ▪ Internal CDR circuits on both receiver and transmitter channels
    ▪ Support CDR bypass
    ▪ Low power consumption <2W
    ▪ Hot Pluggable QSFP form factor ▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF)
    ▪ Single MPO connector receptacle
    ▪ Operating case temperature -40°C to +85°C
    ▪ 3.3V power supply voltage
    ▪ RoHS compliant(lead-free)
    ▪ Hardened active optical cable with metal tube and Kevlar strengthen

    Applications

    ▪ IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
    ▪ Infiniband FDR/EDR

    The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-haoc.html-2/feed 0     FIBERSTAMP 400G QSFP112 FR4 2Km EML Transceiver Module https://www.fiberstamp.com/400g-qsfp112-fr4.html https://www.fiberstamp.com/400g-qsfp112-fr4.html#respond Tue, 29 Jul 2025 09:34:23 +0000 https://www.fiberstamp.com/?post_type=product&p=13660 This FIBERSTAMP 400G QSFP112 FR4 product is designed for 2km optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 4 channels of 100Gb/s (PAM4) electrical output data.

    The module incorporates 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength, operating at 100G per channel. The transmitter path incorporates 4 independent EML drivers and EML lasers together with an optical multiplexer. On the receiver path, an optical de- multiplexer is coupled to a 4-channel photodiode array.

    It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post FIBERSTAMP 400G QSFP112 FR4 2Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • 4 channels full-duplex transceiver modules
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • Hot Pluggable QSFP112 form factor and Compliant with CMIS
    • Compliantto 400G-FR4 Technical Specification
    • Power consumption <10W
    • Maximum link length of 2Km G.652 SMF with KP-FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE802.3cu-2021
    • 400G-FR4 Technical Spec D2p0
    • CEI-112G-VSR-PAM4
    • QSFP112 MSA
    • Data center network
    P/N & Data Sheet Description
    FBJ-400C4K02C 400G QSFP112 FR4 2Km EML Transceiver Module

    The post FIBERSTAMP 400G QSFP112 FR4 2Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-fr4.html/feed 0     FIBERSTAMP 400G QSFP112 LR4 10Km EML Transceiver Module https://www.fiberstamp.com/400g-qsfp112-lr4.html https://www.fiberstamp.com/400g-qsfp112-lr4.html#respond Tue, 29 Jul 2025 09:10:33 +0000 https://www.fiberstamp.com/?post_type=product&p=13658 This FIBERSTAMP FBJ-400C4K10C product is designed for 10km optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 4 channels of 100Gb/s (PAM4) electrical output data.

    The module incorporates 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength, operating at 100G per channel. The transmitter path incorporates 4 independent EML drivers and EML lasers together with an optical multiplexer. On the receiver path, an optical de- multiplexer is coupled to a 4-channel photodiode array.

    It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post FIBERSTAMP 400G QSFP112 LR4 10Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • 4 channels full-duplex transceiver modules
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • Hot Pluggable QSFP112 form factor and Compliant with CMIS
    • Compliant to 400G-LR4 Technical Specification
    • Power consumption <10W
    • Maximum link length of 10Km G.652 SMF with KP-FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • 400G-LR4 Technical Spec D2p0
    • CEI-112G-VSR-PAM4
    • QSFP112 MSA
    • Data center network
    P/N & Data Sheet Description
    FBJ-400C4K10C 400G QSFP112 LR4 10Km EML Transceiver Module

    The post FIBERSTAMP 400G QSFP112 LR4 10Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-lr4.html/feed 0     FIBERSTAMP 100G-DWDM1 QSFP28 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-dwdm1-o-band.html https://www.fiberstamp.com/100g-qsfp28-dwdm1-o-band.html#respond Tue, 22 Jul 2025 08:19:13 +0000 https://www.fiberstamp.com/?post_type=product&p=13634 FIBERSTAMP 100G-DWDM1 QSFP28 is optical transceiver designed for using in 100-Gigabit Ethernet links up to 10km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA , 100G Lambda MSA 100G-LR Specification and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA. It integrates 4 data lanes in each direction with 4×25.78125Gb/s bandwidth. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Duplex LC connector. This module incorporates FIBERSTAMP proven circuit and Silicon Photonics technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 100G-DWDM1 QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Features
    • Supports 100Gbps
    • Fixed O-Band DWDM 200GHz 16 Channels(wavelengths)
    • 78125Gbit/s NRZ electrical interface(CAUI-4)
    • 25Gb/sPAM4 based on Silicon Photonics
    • 100G Lambda MSA 100G-LR Specification Compliant
    • 5W maximum power dissipation
    • Hot-pluggable QSFP28 form factor
    • Maximum link length of 10km on G.652 SMF with KP-FEC
    • Duplex LC receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • RoHS compliant (lead free)

     

    Applications

    • 100G Ethernet
    • Data center
    • P/N & Data Sheet Description
    FTG-100x4K25C 100GE QSFP28 DWDM1 QSFP28 Optical Transceiver

    The post FIBERSTAMP 100G-DWDM1 QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-dwdm1-o-band.html/feed 0     100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp112-lr1.html https://www.fiberstamp.com/100g-sfp112-lr1.html#respond Fri, 29 Nov 2024 08:49:20 +0000 https://www.fiberstamp.com/?post_type=product&p=12855 The Fiberstamp Technologies GSS-SPO101-LR1C is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 10km over Single-Mode Fiber (SMF). The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

    The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver modules
  • 25Gb/s PAM4 transmitter and PAM4 receiver
  • 1025Gbps PAM4 based on a cooledEML TOSA transmitter
  • 1025Gbps PAM4 PINReceiver
  • Power consumption <5W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Maximum link length of 10km on G.652 SMF with KP-FEC
  • DuplexLC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS compliant(lead free)

    • The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-lr1.html/feed 0