SFP - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 30 Jul 2026 10:10:33 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png SFP - FIBERSTAMP https://www.fiberstamp.com 32 32 12G-SDI DWDM SFP Optical Transceiver 10km/30km Reach https://www.fiberstamp.com/12g-sdi-dwdm-sfp.html https://www.fiberstamp.com/12g-sdi-dwdm-sfp.html#respond Wed, 29 Jul 2026 09:18:56 +0000 https://www.fiberstamp.com/?post_type=product&p=15297 FIBERSTAMP’s 12G-SDI DWDM SFP Optical Transceiver is designed to transmit/receive data rates from 50Mbps to 11.88Gbps，compliant with SMPTE ST 2082-1 (12G UHD-SDI), ST 2081-1 (6G UHD-SDI), ST424 (3G SDI), ST 292-1 (HD-SDI), and ST 259 (SD-SDI). FIBERSTAMP’s Video transceiver supports SDI pathological patterns signals.

The transceiver includes threse sections: a cooled DWDM DML transmitter, a PIN/APD photodiode integrated with a trans-impedance preamplifier (TIA) ,Reclocker ,and a MCU controller. The transceiver is compliant with SFP Multi-Source Agreement (MSA) .

The post 12G-SDI DWDM SFP Optical Transceiver 10km/30km Reach first appeared on FIBERSTAMP.

]]> Features

  • SD/HD/3G/6G/12G-SDI SFP Transceiver
  • ST 259, ST 292-1,ST 424, ST-2081 and ST-2082 compatible
  • Metal enclosure for Lower EMI
  • DFB laser transmitter
  • Supports SDI pathological patterns for SD-SDI,HD-SDI, 3G-SDI,6G-SDI and 12G SDI
  • Compliant with SFP MSA
  • Duplex LC connector
  • The module’s receiver contains reclocker
  • ROHS compliant(lead free)
  • single 3.3V power supply
  • Hot-pluggable SFP footprint
  • Operating case temperature range：0 to +70°C

Applications

  • ST 259, ST 292-1, ST 424, ST-2081 and ST-2082 Electrical-to-Optical Interfaces
  • UHDTV/HDTV/SDTV Service Interfaces

The post 12G-SDI DWDM SFP Optical Transceiver 10km/30km Reach first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/12g-sdi-dwdm-sfp.html/feed 0 FIBERSTAMP 100G SFP112 SR1 Optical Transceiver https://www.fiberstamp.com/100g-sfp112-sr1.html https://www.fiberstamp.com/100g-sfp112-sr1.html#respond Wed, 29 Oct 2025 10:00:51 +0000 https://www.fiberstamp.com/?post_type=product&p=13865 The FIBERSTAMP Technologies 100G SFP112 SR1 is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]> Features

  • Full-duplex transceiver modules
  • 53.125GBdPAM4 transmitter and PAM4 receiver
  • 850nm VCSEL and PIN receiver
  • Internal DSPon both receiver and transmitter channels
  • Power consumption <2.1W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Up to 100m transmission distance on OM4/OM5 MMF with FEC
  • DuplexLC/APC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS 6 compliant(lead free)

 

Applications

    • IEEE 802.3db100GBASE-SR1

The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-sfp112-sr1.html/feed 0 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp112-lr1.html https://www.fiberstamp.com/100g-sfp112-lr1.html#respond Fri, 29 Nov 2024 08:49:20 +0000 https://www.fiberstamp.com/?post_type=product&p=12855 The Fiberstamp Technologies GSS-SPO101-LR1C is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 10km over Single-Mode Fiber (SMF). The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Full-duplex transceiver modules
  • 25Gb/s PAM4 transmitter and PAM4 receiver
  • 1025Gbps PAM4 based on a cooledEML TOSA transmitter
  • 1025Gbps PAM4 PINReceiver
  • Power consumption <5W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Maximum link length of 10km on G.652 SMF with KP-FEC
  • DuplexLC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS compliant(lead free)

    • The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-lr1.html/feed 0     100G SFP112 ER1 Lite 1310nm 30km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp112-er1.html https://www.fiberstamp.com/100g-sfp112-er1.html#respond Fri, 29 Nov 2024 08:44:57 +0000 https://www.fiberstamp.com/?post_type=product&p=12854 The Fiberstamp Technologies GSS-SPO101-ES1C is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 30km over Single-Mode Fiber (SMF). The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity APD receiver provide superior performance for 100Gigabit Ethernet applications up to 30km links.

    The post 100G SFP112 ER1 Lite 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver modules
  • 25Gb/s PAM4 transmitter and PAM4 receiver
  • 1025Gbps PAM4 based on a cooledEML TOSA transmitter
  • 1025Gbps PAM4 PINReceiver
  • Power consumption <5W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Maximum link length of 10km on G.652 SMF with KP-FEC
  • DuplexLC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS compliant(lead free)

    • The post 100G SFP112 ER1 Lite 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-er1.html/feed 0     100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-er.html https://www.fiberstamp.com/100g-sfp56-dd-er.html#respond Tue, 19 Dec 2023 07:51:41 +0000 https://www.fiberstamp.com/?post_type=product&p=10834 FIBERSTAMP 100G SFP56-DD ER optical transceiver modules are purpose-built for facilitating high-speed data transmission in data center 100G Lambda 100G LR1-10 links, as well as supporting 5G fronthaul applications up to distances of 30km across single-mode fiber.

    The post 100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module designed in SFP56-DD form factor
  • Capable of transmission rates up to 106.25Gbps
  • Features a 1×106.25Gb/s (PAM4) optical interface
  • Equipped with 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry integrated into receiver and transmitter channels
  • Compliance with SFP-DD MSA and 100G Lambda MSA standards
  • Supports transmission distances of up to 30km via SMF using FEC Features a duplex LC optical interface
  • Low power consumption of less than 3.5W
  • Includes built-in digital diagnostic functionality
  • Designed for commercial operating temperature ranges
  • Operates with a supply voltage of 3.3V
  • RoHS compliant with lead-free construction
    • P/N Description
    FBD-10031K30C 100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver Modules

    The post 100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-er.html/feed 0     100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-lr.html https://www.fiberstamp.com/100g-sfp56-dd-lr.html#respond Tue, 19 Dec 2023 05:57:13 +0000 https://www.fiberstamp.com/?post_type=product&p=10832 FIBERSTAMP 100G SFP56-DD LR optical transceiver modules are purpose-built for facilitating high-speed data transmission in data center 100G Lambda 100G LR1-10 links, as well as supporting 5G fronthaul applications up to distances of 10km/20km across single-mode fiber.

    The post 100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in SFP56-DD form factor
  • Transmission rates of up to 106.25Gbps
  • 1×106.25Gb/s (PAM4) optical interface
  • 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry on receiver and transmitter channels
  • Compliant with SFP-DD MSA, 100G Lambda 100G LR1-10 standard
  • Transmission up to 10km/20km on SMF using KP-FEC
  • Duplex LC optical interface
  • Power consumption less than 3.5w
  • Built-in digital diagnostic function
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBD-10031K10C SFP56-DD LR1, 106.25Gb/s, 10km, EML+PIN, SMF, Dual LC
    FBD-10031K20C SFP56-DD LR1, 106.25Gb/s, 20km, EML+PIN, SMF, Dual LC

    The post 100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-lr.html/feed 0     100G SFP56-DD EML FR1 2km SMF Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-fr.html https://www.fiberstamp.com/100g-sfp56-dd-fr.html#respond Tue, 19 Dec 2023 03:23:45 +0000 https://www.fiberstamp.com/?post_type=product&p=10831 FIBERSTAMP 100G SFP56-DD FR optical transceiver is tailored for 100G Lambda 100G LR-10 Ethernet links within data centers and supports 5G fronthaul over single-mode fiber, covering distances of up to 2km.

    The post 100G SFP56-DD EML FR1 2km SMF Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in SFP56 form factor
  • Single-channel 100G PAM4 1304.58nm/1309.14nm cooled EML transmitter and APD receiver
  • Transmission rates of up to 106.25Gbps
  • 1×106.25Gb/s (PAM4) optical interface
  • 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry on receiver and transmitter channels
  • Compliant with SFP-DD MSA, 100G Lambda MSA
  • Built-in 4:1 gearbox DSP on receiver and transmitter channels
  • Transmission up to 2km on SMF using FEC
  • Duplex LC optical interface
  • Built-in digital diagnostic function
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBD-10031K02C 100G SFP56-DD EML FR1 2km SMF Optical Transceiver

    The post 100G SFP56-DD EML FR1 2km SMF Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-fr.html/feed 0