Data Center - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 03 Sep 2026 09:01:02 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Data Center - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 100G SFP56-DD SR2 Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-sr2.html https://www.fiberstamp.com/100g-sfp56-dd-sr2.html#respond Thu, 03 Sep 2026 08:50:59 +0000 https://www.fiberstamp.com/?post_type=product&p=15454 The FIBERSTAMP 100G SFP56-DD SR2 Care 2-Channel, Pluggable, Fiber-Optic SFP56-DD for 26.5625GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. Digital diagnostics functions are available via the I2C interface, as specified by the SFP56-DD MSA .The optical interface uses MPO12 receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 100G SFP56-DD SR2 Optical Transceiver first appeared on FIBERSTAMP.

]]> Features

  • full-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 53Gbps PAM4 transmitter and PAM4 receiver
  • 850nm VCSEL array
  • PIN photo detector array
  • Power consumption <2W
  • Hot-pluggable SFP56-DD form factor
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF) and 100m on OM4 MMF with FEC
  • Dual LC connector receptacle
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

 

Applications

  • IEEE 802.3cd 100GBASE-SR2

 

The post FIBERSTAMP 100G SFP56-DD SR2 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-sfp56-dd-sr2.html/feed 0 1.6T OSFP-RHS to OSFP-RHS Active Copper Cable https://www.fiberstamp.com/1.6t-osfp-rhs-to-1.6t-osfp-rhs-acc.html https://www.fiberstamp.com/1.6t-osfp-rhs-to-1.6t-osfp-rhs-acc.html#respond Wed, 26 Aug 2026 06:44:33 +0000 https://www.fiberstamp.com/?post_type=product&p=15348 FIBERSTAMP’s OSFP RHS ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

The cable of this product connects data signals from each of the 16 pairs on the single OSFP RHS end to the other OSFP RHS end, each pair operates at data rates of up to 200Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP MSA and IEEE802.3dj ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet 1.6T Ethernet, XDR Infiniband requirements for performance and reliability.

The post 1.6T OSFP-RHS to OSFP-RHS Active Copper Cable first appeared on FIBERSTAMP.

]]> Features

  • 1600Gb/s data rate
  • Support 8x200Gb/s PAM4 modulations with 16 pairs
  • Hot-plug OSFP RHS(Riding Heat Sink) form factor
  • Support up to 2m length
  • 100Ohm differential impedance system
  • 3V power supply & typical power consumption 2.5W
  • Commercial case temperature range of 0°C to 70°C
  • I2C management by MCU

Applications

  • Infiniband XDR
  • Switch / router / HBA
  • Enterprise network
  • Data Center Network
  • Data storage and communication industry

 

STANDARDS COMPLIANCE

      • IEEE P802.3dj D2.0
      • OSFP MSA R4.1
      • CMIS 5.0
      • RoHS

The post 1.6T OSFP-RHS to OSFP-RHS Active Copper Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/1.6t-osfp-rhs-to-1.6t-osfp-rhs-acc.html/feed 0 1.6T OSFP to 1.6T OSFP Active Copper Cable https://www.fiberstamp.com/1.6t-osfp-to-1.6t-osfp-acc.html https://www.fiberstamp.com/1.6t-osfp-to-1.6t-osfp-acc.html#respond Wed, 26 Aug 2026 06:35:05 +0000 https://www.fiberstamp.com/?post_type=product&p=15346 FIBERSTAMP’s OSFP ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

The cable of this product connects data signals from each of the 16 pairs on the single OSFP end to the other OSFP end, each pair operates at data rates of up to 200Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP MSA and IEEE802.3dj ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 1.6T Ethernet, Infiniband XDR requirements for performance and reliability.

The post 1.6T OSFP to 1.6T OSFP Active Copper Cable first appeared on FIBERSTAMP.

]]> Features

  • 1600Gb/s data rate
  • Support 8x 200Gb/s PAM4 modulation with 16 pairs
  • Hot-plug OSFP IHS(Integrated Heat Sink)form factor
  • Support up to 2m length
  • 3V power supply & typical power consumption 2.5W
  • Commercial case temperature range of 0°C to 70°C
  • I2C management by MCU

 

Applications

  • Infiniband  XDR
  • Switch / router / HBA
  • Enterprise network
  • Data Center Network
  • Data storage and communication industry

 

STANDARDS COMPLIANCE

      • IEEE P802.3dj D2.0
      • OSFP MSA Rev 5.2
      • CMIS 5.0
      • RoHS

The post 1.6T OSFP to 1.6T OSFP Active Copper Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/1.6t-osfp-to-1.6t-osfp-acc.html/feed 0 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2#respond Wed, 29 Jul 2026 07:54:15 +0000 https://www.fiberstamp.com/?post_type=product&p=15292 FIBERSTAMP immersion 400G QSFP-DD SR8 is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with FEC, the optical interface is pluggable MPO16 pigtail.

It’s suitable for immersion environment, the internal optics are covered and protected with special technique to prevent cooling liquid leakage.

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 8x53Gbps PAM4 transmitter and PAM4 receiver
  • 8 channels 850nm VCSEL array
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <8.5W
  • Hot Pluggable QSFP DD form factor and Compliant with CMIS
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 pigtail
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3cd 200GBASE-SR4
  • Especially design for liquid immersion environment

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2/feed 0 Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html#respond Thu, 23 Jul 2026 10:24:54 +0000 https://www.fiberstamp.com/?post_type=product&p=15273 FIBERSTAMP 800G QSFP-DD AOC is Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. Both ends of this product are 800G QSFP-DD liquid immersion transceivers , internal optics are covered and protected with special technique to prevent cooling liquid leakage, the both side optical interface is MPO16 and pluggable with MPO16 optical jumper.

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Power consumption <14W per end
  • Hot Pluggable QSFPDD form factor and Compliant with CMIS
  • Maximum link length 100m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)
  • Especially design for liquid immersion environment
  • Pluggable MPO16 optical jumper

 

Applications

  • IEEE 802.3db&nbsp2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html/feed 0 Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2#respond Thu, 23 Jul 2026 10:14:07 +0000 https://www.fiberstamp.com/?post_type=product&p=15270 FIBERSTAMP immersion 800G QSFP-DD SR8 Optical Transceiver Module is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications in liquid immersion environment. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses pluggable MPO16 pigtail. The Common Management Interface Specification (CMIS) for QSFP-DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <13.5W
  • Hot Pluggable QSFP-DD form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 APC pigtail with customized length
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS  compliant(lead free)
  • Pluggable MPO16 pigtail

 

Applications

  • IEEE 802.3db 2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2/feed 0 SFP112 immersion cooling extender https://www.fiberstamp.com/sfp112-immersion-cooling-extender.html https://www.fiberstamp.com/sfp112-immersion-cooling-extender.html#respond Mon, 20 Jul 2026 09:28:41 +0000 https://www.fiberstamp.com/?post_type=product&p=15260 FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP SFP112 immersion cooling extender (FSWE-PC101-DXX) is an important part of liquid immersion solution, normal SFP112 form transceiver/AOC can be used for immersion environment with this product. This product include extender cage, cable, SFP112 housing three parts, the cable length can be customized no more than 0.3m for extension, that can avoid the optical lens/engine/interface exposure to the liquid indirectly.

In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins. When insertion and removal frequently, this product can effectively protect the SFP112 SMT connector of switch/NIC.

The post SFP112 immersion cooling extender first appeared on FIBERSTAMP.

]]> Features

  • Compliant SFP MSA
  • Typical insertion loss less 6dB@26.56GHz with 0.3m length
  • 100ohm differential impedance system
  • 3V power supply
  • I2C R/W function
  • Status indicators with LED
  • Low EMI radiation and crosstalk
  • 3V/0.6W fan and heat sink for contact cooling
  • RoHS compliant(lead free)

 

Applications

  • Extend SFP112 transceiver/AOC for liquid immersion link environment
  • Protect device SFP SMT connector
  • provide I2C R/W and some status indicators with LED

The post SFP112 immersion cooling extender first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/sfp112-immersion-cooling-extender.html/feed 0 SFP28 immersion cooling extender https://www.fiberstamp.com/sfp28-immersion-cooling-extender.html https://www.fiberstamp.com/sfp28-immersion-cooling-extender.html#respond Mon, 20 Jul 2026 09:17:30 +0000 https://www.fiberstamp.com/?post_type=product&p=15258 FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP SFP28 immersion cooling extender (FSCE-PC250-DXX) is an important part of liquid immersion solution, normal SFP form transceiver/AOC can be used for immersion environment with this product. This product include extender cage, cable, SFP housing three parts, the cable length can be customized no more than 0.5m for extension, that can avoid the optical lens/engine/interface exposure to the liquid indirectly.

In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins. When insertion and removal frequently, this product can effectively protect the SFP SMT connector of switch/NIC.

The post SFP28 immersion cooling extender first appeared on FIBERSTAMP.

]]> Features

  • Compliant SFP MSA
  • Typical insertion loss less 4dB@12.89GHz with 0.5m length
  • 100ohm differential impedance system
  • 3V power supply
  • I2C R/W function
  • Status indicators with LED
  • Low EMI radiation and crosstalk
  • RoHS compliant(lead free)

 

Applications

  • Extend SFP28 transceiver/AOC for liquid immersion link environment
  • Protect device SFP SMT connector
  • provide I2C R/W and some status indicators with LED

The post SFP28 immersion cooling extender first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/sfp28-immersion-cooling-extender.html/feed 0 FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp-dd-sr4.html https://www.fiberstamp.com/200g-qsfp-dd-sr4.html#respond Fri, 03 Jul 2026 08:45:20 +0000 https://www.fiberstamp.com/?post_type=product&p=15129 The FIBERSTAMP 200G QSFP DD SR4 is a Pluggable, Parallel, Fiber-Optic QSFP Double Density for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with KP-FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface 200GAUI-8(no FEC)1 uses a 76 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 4x53Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array
    • 4 channels PIN photo detector array
    • Internal 8:4 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Power consumption <7W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with KP-FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3bs 200GBASE-SR4

    • The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr4.html/feed 0     400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html#respond Fri, 03 Jul 2026 08:28:32 +0000 https://www.fiberstamp.com/?post_type=product&p=15126 FIBERSTAMP’s FYJH-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The QSFP112 port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s. The QSFP56 module can convert 4-channel 53.125Gb/s electrical data to 2 parallel channels of optical signals, each supporting106.25Gb/s data transmission. Reversely, it can convert 2-channel 106.25Gb/s optical signals to 4-channel electrical output data on the receiver side. It is compliant with IEEE 802.3db, and QSFP112 &QSFP56 MSA.

    The post 400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP112 and QSFP56 form factor
    • 25Gbps PAM4 transmitter and PAM4 receiver(The QSFP112 End)
    • 4 channels 850nm VCSEL array and PIN photo detector array (The QSFP112 End)
    • Power consumption <8W(The QSFP112 End)
    • 2 channels 850nm VCSEL array and PIN photo detector array (The QSFP56 End)
    • Power consumption <5W(The QSFP56 End)
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)(The QSFP56 End)
    • 25Gbps PAM4 Optics architecture(The QSFP56 End)
    • Compliant to QSFP112&QSFP56 MSA and CMIS
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post 400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html/feed 0