QSFP+ - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 20 Nov 2024 03:26:19 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png QSFP+ - FIBERSTAMP https://www.fiberstamp.com 32 32 48G SDI QSFP+ PSM4 Optical Transceiver https://www.fiberstamp.com/48g-sdi-qsfp.html https://www.fiberstamp.com/48g-sdi-qsfp.html#respond Tue, 05 Sep 2023 10:05:57 +0000 https://www.fiberstamp.com/?post_type=product&p=9612 FIBERSTAMP 48G SDI QSFP+ PSM4 video optical transceiver modules are designed for 8K ultra-high-definition video signal optical transmission applications, and support reach up to 10km or 20km over 4 pairs of parallel single-mode fibers.

 

The post 48G SDI QSFP+ PSM4 Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Hot-pluggable QSFP+ optical transceiver modules
  • 4-channel DFB transmitter array and PIN receiver array
  • PSM4 1310nm and PSM CWDM4 (1271nm, 1291nm, 1311nm, and 1331nm) optional
  • SMPTE ST 297/2081/2082 compliant
  • Support SD-SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI data rates
  • Data rate up to 11.88Gbps per channel
  • Reach up to 10km or 20km over 4 pairs of parallel single-mode fibers
  • 3.5W maximum power consumption
  • Metal housing for lower EMI
  • MPO12 optical interface
  • Optional with MSA or Non-MSA pinout
  • Commercial case operating temperature range
  • 3.3V power supply
  • Compliant with RoHS (lead-free)

    • The post 48G SDI QSFP+ PSM4 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/48g-sdi-qsfp.html/feed 0     40G QSFP+ Passive Directed Copper Cables, 4x 10G NRZ, 5Meters(16ft) https://www.fiberstamp.com/40g-qsfp-plus-pcc.html https://www.fiberstamp.com/40g-qsfp-plus-pcc.html#respond Mon, 14 Aug 2023 08:55:10 +0000 https://www.fiberstamp.com/?post_type=product&p=9471 FIBERSTAMP 40G QSFP+ PCC passive direct copper cable is used for interconnection within or between racks within the data center, conforming to IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocol and compatible with the InfiniBand QDR transport protocol. The series uses 8 pairs of coaxial cables to transmit 4x 10G NRZ signals over distances of up to 3m (30AWG) or 5m (26AWG).

    The post 40G QSFP+ Passive Directed Copper Cables, 4x 10G NRZ, 5Meters(16ft) first appeared on FIBERSTAMP.

    ]]>
  • The QSFP+ hot-pluggable package module coaxial cable assembly is used
  • 4-channel 10G NRZ modulation
  • The transmission rate per lane can reach up to 10.3125Gbps
  • Complies with QSFP+ MSA and IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocols
  • Compatible with InfiniBand QDR transmission protocol
  • Cable length up to 3m (30AWG) or 5m (26AWG)
  • The bit error rate (BER) is better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • The supply voltage is 3.3V
  • LSZH (LSZH (LSZH Free Cable) cable outer material
  • LF (lead-free) HF (halogen-free) PCB
  • RoHS compliant (lead-free)
    • Product Model FWF-E40xxxxxC
    Distance (m) 1-3 4-5
    Cable Gauge (AWG) 30 26

    The post 40G QSFP+ Passive Directed Copper Cables, 4x 10G NRZ, 5Meters(16ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-plus-pcc.html/feed 0     40G QSFP+ To 4x 10G SFP+ Passive Directed Copper Cables, 4x10G NRZ, 3Meters(10ft) https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-pcc.html https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-pcc.html#respond Mon, 14 Aug 2023 08:41:56 +0000 https://www.fiberstamp.com/?post_type=product&p=9470 FIBERSTAMP 40G QSFP+ to 4 x 10G SFP+ PCC passive direct copper cable is used for interconnection within or between racks within the data center, conforming to IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocol and compatible with 10GSFP+Cu Ethernet and  InfiniBand QDR transport protocol. The series uses 8 pairs of coaxial cables to transmit 4x 10G NRZ signals over distances of up to 3m (30AWG).

    The post 40G QSFP+ To 4x 10G SFP+ Passive Directed Copper Cables, 4x10G NRZ, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>
  • The QSFP+ hot-pluggable package module coaxial cable assembly is used
  • 4-channel 10G NRZ modulation
  • TAvailable in QSFP+/SFP+ hot-swappable package module coaxial cable assembly
  • 4-channel 10G NRZ modulation
  • The transmission rate per lane can reach up to 10.3125Gbps
  • Complies with QSFP+/SFP+ MSA and IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocols
  • Compatible with 10GSFP+Cu Ethernet and InfiniBand QDR transmission protocol
  • Cable length up to 3m (30AWG)
  • The bit error rate (BER) is better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • The supply voltage is 3.3V
  • LSZH (LSZH (LSZH Free Cable) cable outer material
  • LF (lead-free) HF (halogen-free) PCB
  • RoHS compliant (lead-free)
    • Product Model FWF4B-E40xxxxxC
    Distance (m) 1-3 4-5
    Cable Gauge (AWG) 30 26

    The post 40G QSFP+ To 4x 10G SFP+ Passive Directed Copper Cables, 4x10G NRZ, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-pcc.html/feed 0     40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html#respond Mon, 14 Aug 2023 03:00:48 +0000 https://www.fiberstamp.com/?post_type=product&p=9459 FIBERSTAMP 40G QSFP+ AOC active optical cable is used for short-distance branch interconnection between internal devices in the data center. It complies with IEEE 802.3ba 40GBASE-SR4 transmission protocol, and is also compatible with IEEE 802.3ae 10GBASE-SR and InfiniBand QDR transmission protocols. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3).

    The post 40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating one 40G QSFP+ SR4 and four 10G SFP+ SR optical transceiver modules at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate of each channel can reach up to 10.3125Gbps
  • Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 transmission protocol
  • Compatible with IEEE 802.3ae 10GBASE-SR and InfiniBand QDR transport protocols
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 100m (OM3)
  • Power consumption is less than 1.5W (per 40G QSFP+ SR4 optical module) or 1W (per
  • 10G SFP+ SR optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF4B-E40MxxxC 40G QSFP+ to 4x 10G SFP+ AOC

    The post 40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html/feed 0     40G QSFP+ Active Optical Cables 4x10G NRZ, 300Meters(984ft) https://www.fiberstamp.com/40g-qsfp-plus-aoc.html https://www.fiberstamp.com/40g-qsfp-plus-aoc.html#respond Fri, 11 Aug 2023 09:42:29 +0000 https://www.fiberstamp.com/?post_type=product&p=9433 FIBERSTAMP 40G QSFP+ AOC active optical cable is used for short-distance interconnection between internal devices in the data center, conforms to IEEE 802.3ba 40GBASE-SR4 transmission protocol, and is also compatible with InfiniBand QDR transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 300m (OM3) or 400m (OM4).

    The post 40G QSFP+ Active Optical Cables 4x10G NRZ, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating a 40G QSFP+ eSR4 optical transceiver module at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate of each channel can reach up to 10.3125Gbps
  • Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 transmission protocol
  • Compatible with InfiniBand QDR transport protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 300m (OM3) or 400m (OM4)
  • Power consumption is less than 1.5W (each 40G QSFP+ eSR4 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF-E40MxxxC 40G QSFP+ AOC

    The post 40G QSFP+ Active Optical Cables 4x10G NRZ, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-plus-aoc.html/feed 0     56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) https://www.fiberstamp.com/56g-qsfp-plus-aoc.html https://www.fiberstamp.com/56g-qsfp-plus-aoc.html#respond Fri, 11 Aug 2023 09:32:55 +0000 https://www.fiberstamp.com/?post_type=product&p=9432 FIBERSTAMP 56G QSFP+ AOC active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with the 4x16GFC fiber channel transmission protocol and is compatible with the InfiniBand FDR transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3) or 150m (OM4).

    The post 56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating a 56G QSFP+ SR4 optical transceiver module at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 14.0625Gbps
  • Compliant with QSFP+ MSA (SFF-8436) and 4x16GFC fiber channel transmission protocol
  • Compatible with InfiniBand FDR transport protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 100m (OM3) or 150m (OM4)
  • Power consumption is less than 1.5W (each 56G QSFP+ SR4 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF-F56MxxxC 56G QSFP+ AOC

    The post 56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/56g-qsfp-plus-aoc.html/feed 0     100G QSFP28 Hardened AOC https://www.fiberstamp.com/100g-qsfp28-haoc.html https://www.fiberstamp.com/100g-qsfp28-haoc.html#respond Fri, 11 Aug 2023 08:10:20 +0000 https://www.fiberstamp.com/?post_type=product&p=9425 FIBERSTAMP 100G QSFP28 pluggable hardened active optical cable assemblies support 100G Ethernet, InfiniBand EDR and CPRI Option 10 data rates.

    The post 100G QSFP28 Hardened AOC first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable QSFP28 armored active optical cable assemblies
  • 4x 25G NRZ electrical interface
  • 4x 25G NRZ optical interface
  • Data rate up to 25.78125Gbps per channel
  • Compliant with QSFP28 MSA, 100GBASE-SR4 Ethernet, InfiniBand EDR and CPRI Option 10
  • Low power dissipation
  • Industrial case operating temperature range
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)
    • P/N Description
    FYG-100MxxxTH 100G QSFP28 HAOC

    The post 100G QSFP28 Hardened AOC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-haoc.html/feed 0     40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver https://www.fiberstamp.com/40g-qsfp-zr4.html https://www.fiberstamp.com/40g-qsfp-zr4.html#respond Wed, 09 Aug 2023 06:51:52 +0000 https://www.fiberstamp.com/?post_type=product&p=9252 FIBERSTAMP 40G QSFP+ ZR4 optical transceiver module is designed for long-distance interconnectivity in data centers. It complies with the 40G Ethernet transmission protocol and supports dual rates of 40GE and OTU3. This module features a built-in pair of 4-channel MUX and DEMUX. Each channel operates at a center wavelength of 1295.56nm, 1300.05nm, 1304.58nm, and 1309.14nm. It utilizes a single-mode fiber pair for transmission, enabling distances of up to 80km.

    The post 40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4-channel full-duplex transceiver module in QSFP+ hot-pluggable form factor
  • 4-channel cooled EML LWDM TOSA and PIN ROSA (with built-in SOA)
  • Compliant with QSFP+ MSA, 40G Ethernet and OTN OTU3 transmission protocols
  • Supports transmission rates up to 39.8Gbps to 44.6Gbps
  • Utilizes single-mode fiber for transmission, with a maximum reach of 80km
  • Power consumption of less than 6W
  • Dual LC optical connectors
  • Designed for commercial-grade operating temperature range
  • Operates at a voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBF-N40L4K80C 40GE/OTU3 QSFP+ ZR4 EML LWDM4 80km Optical Transceiver Module

    The post 40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-zr4.html/feed 0     40G QSFP+ ER4 DML CWDM4 40km SMF LC Optical Transceiver https://www.fiberstamp.com/40g-qsfp-er4.html https://www.fiberstamp.com/40g-qsfp-er4.html#respond Wed, 09 Aug 2023 06:36:00 +0000 https://www.fiberstamp.com/?post_type=product&p=9247 FIBERSTAMP 40G QSFP+ ER4 optical transceiver module is designed for long-distance interconnections in data centers. It complies with the IEEE 802.3bm 40GBASE-ER4 Ethernet transmission protocol and supports both 40GE and OTU3 dual-rate applications, which features an integrated pair of multiplexers (MUX) and demultiplexers (DEMUX), with each channel operating at a center wavelength of 1271nm, 1291nm, 1311nm, and 1331nm respectively. It utilizes a pair of single-mode fibers for transmission, allowing for a maximum reach of 40km.

    The post 40G QSFP+ ER4 DML CWDM4 40km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4-channel full-duplex transceiver module in QSFP+ hot-pluggable form factor
  • 4 channels of non-cooled CWDM DML and high-sensitivity APD ROSA
  • Compliant with QSFP+ MSA and IEEE 802.3bm 40GBASE-ER4 and OTN OTU3 transmission protocols
  • Supports transmission rates up to 39.8Gbps to 44.6Gbps
  • Utilizes single-mode fiber for transmission, with a maximum reach of 40km (link loss budget of 18.5dB)
  • Power consumption of less than 3.5W
  • Dual LC optical connectors
  • Designed for commercial-grade operating temperature range
  • Operates at a voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBF-N40C4K40C 40GE/OTU3 QSFP+ ER4 DML CWDM4 40km Optical Transceiver Module

    The post 40G QSFP+ ER4 DML CWDM4 40km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-er4.html/feed 0     40G QSFP+ LR4 DML CWDM4 10km SMF MPO Optical Transceiver https://www.fiberstamp.com/40g-qsfp-lr4.html https://www.fiberstamp.com/40g-qsfp-lr4.html#respond Wed, 09 Aug 2023 06:21:53 +0000 https://www.fiberstamp.com/?post_type=product&p=9244 FIBERSTAMP 40G QSFP+ LR4 optical transceiver module is designed for medium to long-distance interconnects in data centers, complying with the IEEE 802.3ba 40GBASE-LR4 Ethernet transmission protocol. It is available in a dual-rate version supporting both 40GE and OTU3. This product series features an integrated pair of 4-channel MUX and DEMUX, with the center wavelengths of the four channels being 1271nm, 1291nm, 1311nm, and 1331nm. It utilizes a pair of single-mode fibers for transmission, allowing for distances of up to 2km, 10km, or 20km.

    The post 40G QSFP+ LR4 DML CWDM4 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
    • Utilizes QSFP+ hot-pluggable form factor for a 4-channel optical module (available in both transceiver and receiver-only DPI versions)
    • Features 4-channel non-cooled CWDM DML lasers and high-sensitivity PIN-TIA
    • Uses multiplexers and demultiplexers based on TFF or AAWG technology
    • Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 Ethernet transmission protocol
    • Maximum transmission rate of up to 41.25Gbps (optional 40GE/OTU3 dual-rate version)
    • Transmits over a pair of single-mode fibers with distances of up to 2km, 10km, or 20km
    • Power consumption less than 2.5W
    • Dual LC optical connectors
    • Options for commercial and extended operating temperature ranges
    • Power supply voltage of 3.3V
    • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBF-E40C4K10C
    FBF-N40C4K10C    		 40GE QSFP+ LR4 DML CWDM4 10km Optical Transceiver (TFF)

    The post 40G QSFP+ LR4 DML CWDM4 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-lr4.html/feed 0