QSFP28 MSA - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Mon, 01 Dec 2025 10:11:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png QSFP28 MSA - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr2.html https://www.fiberstamp.com/100g-qsfp28-sr2.html#respond Mon, 01 Dec 2025 09:49:17 +0000 https://www.fiberstamp.com/?post_type=product&p=14163 The FIBERSTAMP 100G SR2 QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE 802.3cd and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

The module incorporates 2 channels 850nm VCSEL Array and PIN photo detector array. This results in an aggregate bandwidth of 100Gbps into a MPO cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

]]> Features

  • QSFP28 module form factor
  • Support QSFP28 SFF-8436/8636
  • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
  • 78125Gbps NRZ retimed electrical I/O
  • 2 channels 850nm VCSEL Array and PIN photo detector array
  • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
  • Single MPO12/APCreceptacle(Only use channel 1 and channel 2)
  • Maximum link length of 100m OM4,70m OM3(DSP KP4-FEC is ON)
  • Built-in digital diagnostic functions
  • Operating case temperature range: 0 to 70°C
  • Single 3.3V power supply
  • Low power consumption < 4W
  • RoHS compliant (lead free)

 

Applications

    • 100G SR2（2x 50G PAM4）applications
    • High-speed interconnects within and between switches, routers and transport equipment
    • Server-server clusters, super-computing interconnections
    • Proprietary backplanes
    • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
P/N Description
FEG-100S2M10C 100GE QSFP28 SR2 Optical Transceiver

The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-qsfp28-sr2.html/feed 0 100G BIDI-ER1-30km QSFP28 Optical Transceiver https://www.fiberstamp.com/product/100g-qsfp28-bidi-er1-30km-optical-transceiver https://www.fiberstamp.com/product/100g-qsfp28-bidi-er1-30km-optical-transceiver#respond Wed, 11 Jun 2025 03:02:52 +0000 https://www.fiberstamp.com/?post_type=product&p=13567 Description&nbsp

The FIBERSTAMP 100G QSFP28 BIDI ER1-30 optical transceiver, is designed for using in 100-Gigabit Ethernet links up to 30km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA , OIF CEI-28G-VSR and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

The module incorporates 1 channel optical signal, operating at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps (PAM4) optical signal, and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Single LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 30km links.

The post 100G BIDI-ER1-30km QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Features
    • Supports 100GBASE-ER1- 30 BIDI
    • Full-duplex transceiver module
    • 781 NRZ electrical interface(CAUI-4)
    • 25Gbps PAM4 based on a cooled EML TOSA transmitter
    • 25Gbps PAM4 APD Receiver
    • 5W maximum power dissipation
    • Hot-pluggable QSFP28 form factor
    • Maximum link length of30km on G.652 SMF with KP-FEC
    • BIDI LC receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • RoHS compliant (lead free)

     

    Applications

    • 100G Lambda 100G ER1-30

    • The post 100G BIDI-ER1-30km QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/product/100g-qsfp28-bidi-er1-30km-optical-transceiver/feed 0     100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC https://www.fiberstamp.com/100g-bidi-sr1.2-qsfp28.html https://www.fiberstamp.com/100g-bidi-sr1.2-qsfp28.html#respond Thu, 10 Aug 2023 07:13:38 +0000 https://www.fiberstamp.com/?post_type=product&p=9353 The FIBERSTAMP 100G BIDI SR QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE802.3cm-2020 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

    The module incorporates 2 channels 850nm/910nm VCSEL and PIN photo detector, transmitting and receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 100Gbps into a duplex LC cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

    The post 100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP28 module form factor
    • Support QSFP28 SFF-8436/8636
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • Bandwidth density of 100Gbps bi-directional
    • 2 channels 850nm/910nm VCSEL and PIN photo detector
    • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Duplex LC connector
    • Maximum link length of 100m OM4,70m OM3
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • Low power consumption < 4W
    • RoHS compliant (lead free)

    Applications

      • 100G SR BD applications
      • High-speed interconnects within and between switches, routers and transport equipment
      • Server-server clusters, super-computing interconnections
      • Proprietary backplanes
      • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
    P/N Description
    FBG-100B2M10C 100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC

    The post 100G BIDI SR1.2 QSFP28 Optical Transceiver Duplex LC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-bidi-sr1.2-qsfp28.html/feed 0