850nm - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 17 Jul 2026 09:20:18 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png 850nm - FIBERSTAMP https://www.fiberstamp.com 32 32 400G OSFP RHS Active Optical Cable for liquid cooling https://www.fiberstamp.com/400g-osfp-rhs-aoc.html https://www.fiberstamp.com/400g-osfp-rhs-aoc.html#respond Fri, 17 Jul 2026 09:07:43 +0000 https://www.fiberstamp.com/?post_type=product&p=15254 The FIBERSTAMP’s 400GE OSFP RHS AOC is designed for use in 400G Ethernet/IB links over OM3/OM4/OM5 multimode fiber, both ends are OSFP RHS liquid immersion transceivers and connected by a single MPO connector receptacle, internal optics are covered and protected with special technique to prevent cooling liquid leakage, all of active optical cable assemblies are specially designed for liquid immersion environment. They are compliant with the OSFP MSA and IEEE 802.3db 400GBASE-SR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. It integrates 4 data lanes in each direction with 4*106.25Gb/s bandwidth.

The post 400G OSFP RHS Active Optical Cable for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 4 channelsfull-duplex transceiver modules per end
  • Data rate up to 106.25G per channel
  • 4 channels 850nm VCSEL array
  • 4 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <8W/end
  • Hot Pluggable OSFP RHS form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHScompliant(lead free)
  • Single MPO12 connector receptacle

Applications

  • IEEE 802.3db 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.
  • Especially design for liquid immersion environment

The post 400G OSFP RHS Active Optical Cable for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-osfp-rhs-aoc.html/feed 0 400G QSFP112 Active Optical Cable for liquid cooling https://www.fiberstamp.com/400g-qsfp112-aoc.html-2 https://www.fiberstamp.com/400g-qsfp112-aoc.html-2#respond Fri, 17 Jul 2026 08:59:26 +0000 https://www.fiberstamp.com/?post_type=product&p=15251 The FIBERSTAMP’s 400GE QSFP112 AOC is designed for use in 400G Ethernet/IB links over OM3/OM4/OM5 multimode fiber, both ends are QSFP112 liquid immersion transceivers and connected by a single MPO connector receptacle, internal optics are covered and protected with special technique to prevent cooling liquid leakage, all of active optical cable assemblies are specially designed for liquid immersion environment. They are compliant with the QSFP112 MSA and IEEE 802.3db 400GBASE-SR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. It integrates 4 data lanes in each direction with 4*106.25Gb/s bandwidth.

The post 400G QSFP112 Active Optical Cable for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 4 channels full-duplex transceiver modules per end
  • Data rate up to 106.25G per channel
  • 4 channels 850nm VCSEL array
  • 4 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <8W/end
  • Hot Pluggable QSFP112 form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber and 100m on OM4 with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)
  • Single MPO connector receptacle

Applications

    • IEEE 802.3db 400GBASE-SR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.
    • Especially design for liquid immersion environment

The post 400G QSFP112 Active Optical Cable for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp112-aoc.html-2/feed 0 FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp-dd-sr4.html https://www.fiberstamp.com/200g-qsfp-dd-sr4.html#respond Fri, 03 Jul 2026 08:45:20 +0000 https://www.fiberstamp.com/?post_type=product&p=15129 The FIBERSTAMP 200G QSFP DD SR4 is a Pluggable, Parallel, Fiber-Optic QSFP Double Density for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with KP-FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface 200GAUI-8(no FEC)1 uses a 76 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 4x53Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array
    • 4 channels PIN photo detector array
    • Internal 8:4 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Power consumption <7W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with KP-FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3bs 200GBASE-SR4

    • The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr4.html/feed 0     400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html#respond Fri, 03 Jul 2026 08:28:32 +0000 https://www.fiberstamp.com/?post_type=product&p=15126 FIBERSTAMP’s FYJH-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The QSFP112 port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s. The QSFP56 module can convert 4-channel 53.125Gb/s electrical data to 2 parallel channels of optical signals, each supporting106.25Gb/s data transmission. Reversely, it can convert 2-channel 106.25Gb/s optical signals to 4-channel electrical output data on the receiver side. It is compliant with IEEE 802.3db, and QSFP112 &QSFP56 MSA.

    The post 400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP112 and QSFP56 form factor
    • 25Gbps PAM4 transmitter and PAM4 receiver(The QSFP112 End)
    • 4 channels 850nm VCSEL array and PIN photo detector array (The QSFP112 End)
    • Power consumption <8W(The QSFP112 End)
    • 2 channels 850nm VCSEL array and PIN photo detector array (The QSFP56 End)
    • Power consumption <5W(The QSFP56 End)
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)(The QSFP56 End)
    • 25Gbps PAM4 Optics architecture(The QSFP56 End)
    • Compliant to QSFP112&QSFP56 MSA and CMIS
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post 400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html/feed 0     400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html#respond Mon, 30 Mar 2026 09:39:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14848 FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.

    FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

    The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP56-DD and QSFP28form factor
    • QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
    • Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
    • 8x 50Gb/s PAM4 modulation
    • Low power dissipation <9W (400G End)
    • Low power dissipation <4.5W (100G End)
    • RoHS-6 compliant (lead-free)
    • Commercial case temperature range of 0°C to 70°C
    • Single 3.3V power supply
    • Maximum link length of 70m on OM3 MMF
      and 100m on OM4 & OM5 MMF
    • Uncooled 850nm VCSEL array (both End)
    • PIN photo detector array (both End)
    • 400GBASE-SR8 and 100GBASE-SR2 compliant
    • I2C management interface
    • CMIS V4.0 compliant

     

    Applications

    • IEEE 802.3cd&nbsp100GBASE-SR2 Ethernet (PAM4)
    • IEEE 802.3cd&nbsp400GBASE-SR8 Ethernet (PAM4)

    The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html/feed 0     400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:53:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14840 FIBERSTAMP’s FYLU-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP112 port has integrate 4 independent transmit and receive channels and uses QSFP112 MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP112 MSA.

    The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug OSFP-RHS and QSFP112 form factor
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array(both End)
    • 4 channels PIN photo detector array(both End)
    • Power consumption <8W
    • Compliant to OSFP&QSFP112 MSA and CMIS4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html/feed 0     FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:17:44 +0000 https://www.fiberstamp.com/?post_type=product&p=14837 FIBERSTAMP’s FYLU-400M50C MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP-DD port has integrate 4 independent transmit and receive channels and uses QSFP-DD MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP-DD MSA.

    The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug OSFP-RHS and QSFPDD form factor
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array(both End)
    • 4 channels PIN photo detector array(both End)
    • Power consumption <8W
    • Compliant to OSFP&QSFP-DD MSA and CMIS4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html/feed 0     FIBERSTAMP 53G SFP56 Active Optical Cable https://www.fiberstamp.com/53g-sfp56-aoc.html-2 https://www.fiberstamp.com/53g-sfp56-aoc.html-2#respond Mon, 23 Mar 2026 07:56:49 +0000 https://www.fiberstamp.com/?post_type=product&p=14829 The FIBERSTAMP FYD-E50M100C is a single-Channel Active Optical Cable for 26.5625GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     Features

    • full-duplex transceiver modules
    • Transmission data rate up to 53Gbps per channel
    • 53Gbps PAM4 transmitter and PAM4 receiver
    • 850nm VCSEL array
    • PIN photo detector array
    • Internal CDR circuits on both receiver and transmitter channels
    • Power consumption <2W
    • Hot Pluggable SFP form factor and Compliant with SFF-8431,SFF-8472
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS 6 compliant(lead free)

     

    Applications

    • IEEE 802.3cd 50GBASE-SR

    The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/53g-sfp56-aoc.html-2/feed 0     FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr2.html https://www.fiberstamp.com/100g-qsfp28-sr2.html#respond Mon, 01 Dec 2025 09:49:17 +0000 https://www.fiberstamp.com/?post_type=product&p=14163 The FIBERSTAMP 100G SR2 QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE 802.3cd and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

    The module incorporates 2 channels 850nm VCSEL Array and PIN photo detector array. This results in an aggregate bandwidth of 100Gbps into a MPO cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

    The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP28 module form factor
    • Support QSFP28 SFF-8436/8636
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 2 channels 850nm VCSEL Array and PIN photo detector array
    • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Single MPO12/APCreceptacle(Only use channel 1 and channel 2)
    • Maximum link length of 100m OM4,70m OM3(DSP KP4-FEC is ON)
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • Low power consumption < 4W
    • RoHS compliant (lead free)

     

    Applications

      • 100G SR2（2x 50G PAM4）applications
      • High-speed interconnects within and between switches, routers and transport equipment
      • Server-server clusters, super-computing interconnections
      • Proprietary backplanes
      • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
    P/N Description
    FEG-100S2M10C 100GE QSFP28 SR2 Optical Transceiver

    The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-sr2.html/feed 0     FIBERSTAMP 100G SFP112 SR1 Optical Transceiver https://www.fiberstamp.com/100g-sfp112-sr1.html https://www.fiberstamp.com/100g-sfp112-sr1.html#respond Wed, 29 Oct 2025 10:00:51 +0000 https://www.fiberstamp.com/?post_type=product&p=13865 The FIBERSTAMP Technologies 100G SFP112 SR1 is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

    • Full-duplex transceiver modules
    • 53.125GBdPAM4 transmitter and PAM4 receiver
    • 850nm VCSEL and PIN receiver
    • Internal DSPon both receiver and transmitter channels
    • Power consumption <2.1W
    • Hot Pluggable SFP112form factor
    • Compliant with SFF-DD MSA,CMIS
    • Up to 100m transmission distance on OM4/OM5 MMF with FEC
    • DuplexLC/APC connector
    • Built-in digital diagnostic functions
    • Operating case temperature:0°C to +70°C
    • +3V power supply
    • RoHS 6 compliant(lead free)

     

    Applications

      • IEEE 802.3db100GBASE-SR1

    The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-sr1.html/feed 0