1310nm - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 22 Jul 2026 09:25:16 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.3 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png 1310nm - FIBERSTAMP https://www.fiberstamp.com 32 32 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html#respond Wed, 22 Jul 2026 09:03:26 +0000 https://www.fiberstamp.com/?post_type=product&p=15264 FIBERSTAMP 200G QSFP DD PSM8 20km Optical Transceiver is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16/ 24 fiber MTP (MPO) connector. This module incorporates FIBERSTAMP Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> Features

  • 8 channels full-duplex transceiver modules
  • Supports 8×25Gb/s aggregate bit rates
  • Supports 8×10Gb/s aggregate bit rates if required
  • 8 channels 1310nm DFB
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for G.652 SMF
  • Single male MPO16/MPO24(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100G Ethernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

 

P/N & Data Sheet Description
FEL-200P8K02C16 200GE QSFP-DD PSM8 DML 1310nm 20km MPO16 Optical Modules
FEL-200P8K10C24 200GE QSFP-DD PSM8 DML 1310nm 20km MPO24 Optical Modules

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html/feed 0 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html#respond Mon, 22 Jun 2026 07:58:17 +0000 https://www.fiberstamp.com/?post_type=product&p=15005 The FIBERSTAMP 400G QSFP-DD PSM O-band DWDM4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 400G or 200G Ethernet Metro-Access over DWDM applications and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA and CMIS compliant
  • Compliantto 802.3bs 400GBASE-DR4
  • 125Gbit/s PAM4 electrical interface(400GAUI-8)
  • 25Gbps(53.125GBd PAM4)Optics architecture
  • Power consumption <11W
  • Maximum link length of 10km G.652 SMF with KP-FEC
  • Up to 30 km when equipped with an external SOA
  • MPO-12 receptacles
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3bs 400GBASE-DR4
  • Data center network

The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html/feed 0 FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> Features
  • 8channels full-duplex transceiver modules
  • Supports8×25Gb/s aggregate bit rates
  • Supports8×10Gb/s aggregate bit rates if required
  • 8channels 1310nm DFB
  • 8channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for 652 SMF
  • Single male MPO16(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3Vpower supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100GEthernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0 Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersion-800g-osfp-dr8.html https://www.fiberstamp.com/immersion-800g-osfp-dr8.html#respond Fri, 15 Aug 2025 06:50:24 +0000 https://www.fiberstamp.com/?post_type=product&p=13748 The FIBERSTAMP 800G OSFP DR8 is a transceiver module designed for optical communication applications of up to 500 m in liquid immersion environments. It is built on two core technological pillars—advanced silicon photonics chips and a state-of-the-art 5 nm DSP—working in synergy to deliver exceptional performance, efficiency, and integration.

Specifically engineered for liquid immersion, the module’s housing is sealed with a protective coating to prevent coolant ingress into the optical engine. Compared with other liquid-immersion optical solutions, this design incorporates a dedicated pressure test point for leakage detection, giving the sealing and testing process a unique advantage in manufacturing quality assurance.

Built to withstand the most demanding operating conditions, the module resists extreme temperatures, high humidity, and EMI interference. It also offers extensive functionality and feature integration, all accessible via a two-wire serial interface.

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • OSFP MSA and CMIS compliant
  • 25Gbps (53.125GBd PAM4) electrical interface
  • 25Gbps (53.125GBd PAM4) optics architecture
  • Power consumption <15W
  • Up to 500m G.652 SMF with KP-FEC
  • Support pluggable dual MPO-12 pigtails
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 800GBASE-DR8
    • AI/ML Application
    • Data center network
    • Especially design for liquid immersion environment

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersion-800g-osfp-dr8.html/feed 0 SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp112-dr4.html https://www.fiberstamp.com/400g-qsfp112-dr4.html#respond Tue, 29 Jul 2025 09:10:06 +0000 https://www.fiberstamp.com/?post_type=product&p=13657 The FIBERSTAMP 400G QSFP112 DR4++ is a transceiver module designed for 10km optical communication applications, and it is compliant to QSFP112 MSA, IEEE 802.3cu protocol. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

The post SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP112 MSA and CMIS compliant
  • 25Gbps(53.125GBd PAM4)electrical interface
  • 25Gbps(53.125GBd PAM4)optics architecture
  • Power consumption <10W
  • Maximum link length of 10km G.652 SMF with KP-FEC
  • MPO-12 receptacles
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

    • 400GBASE-DR4++
    • InfiniBand NDR
    • Data center network
P/N & Data Sheet Description
FUJ-400P4K10C SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module

The post SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp112-dr4.html/feed 0 SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-osfp-dr4-siph.html https://www.fiberstamp.com/400g-osfp-dr4-siph.html#respond Tue, 22 Jul 2025 08:47:00 +0000 https://www.fiberstamp.com/?post_type=product&p=13636 FIBERSTAMP FUR-400P4M50C is a high-performance transceiver module designed for 500-meter optical communication applications. It is fully compliant with OSFP MSA and the IEEE 802.3bs standard.

This silicon photonics (SiPh) transceiver is built on a state-of-the-art SiPh platform, incorporating both active and passive optoelectronic components. It utilizes advanced 3D packaging technology and industry-leading 7nm DSP chips, delivering a cost-effective, low-power solution for 400GBASE data center applications.

Engineered for reliability, the module is designed to perform in harsh operating environments, withstanding variations in temperature, humidity, and EMI interference. It provides high functionality and integration, with easy management and control via a two-wire serial interface.

The post SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> Features
▪ OSFP MSA and CMIS compliant ▪ Compliant to 802.3bs
▪ 4×106.25Gbps(53.125GBd PAM4)electrical interface
▪ 4×106.25Gbps(53.125GBd PAM4)optics architecture
▪ Power consumption <10W
▪ Maximum link length of 500m G.652 SMF with KP-FEC
▪ MPO-12 receptacles
▪ Built-in digital diagnostic functions
▪ Operating case temperature 0°C to +70°C
▪ 3.3V power supply voltage
▪ RoHS compliant(lead free)

Applications
▪ Ethernet and Telecom
▪ Infiniband

 

P/N & Data Sheet Description
FUR-400P4M50C 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module

The post SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-osfp-dr4-siph.html/feed 0 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp112-lr1.html https://www.fiberstamp.com/100g-sfp112-lr1.html#respond Fri, 29 Nov 2024 08:49:20 +0000 https://www.fiberstamp.com/?post_type=product&p=12855 The Fiberstamp Technologies GSS-SPO101-LR1C is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 10km over Single-Mode Fiber (SMF). The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Full-duplex transceiver modules
  • 25Gb/s PAM4 transmitter and PAM4 receiver
  • 1025Gbps PAM4 based on a cooledEML TOSA transmitter
  • 1025Gbps PAM4 PINReceiver
  • Power consumption <5W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Maximum link length of 10km on G.652 SMF with KP-FEC
  • DuplexLC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS compliant(lead free)

    • The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-lr1.html/feed 0     100G SFP112 ER1 Lite 1310nm 30km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp112-er1.html https://www.fiberstamp.com/100g-sfp112-er1.html#respond Fri, 29 Nov 2024 08:44:57 +0000 https://www.fiberstamp.com/?post_type=product&p=12854 The Fiberstamp Technologies GSS-SPO101-ES1C is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 30km over Single-Mode Fiber (SMF). The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity APD receiver provide superior performance for 100Gigabit Ethernet applications up to 30km links.

    The post 100G SFP112 ER1 Lite 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver modules
  • 25Gb/s PAM4 transmitter and PAM4 receiver
  • 1025Gbps PAM4 based on a cooledEML TOSA transmitter
  • 1025Gbps PAM4 PINReceiver
  • Power consumption <5W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Maximum link length of 10km on G.652 SMF with KP-FEC
  • DuplexLC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS compliant(lead free)

    • The post 100G SFP112 ER1 Lite 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-er1.html/feed 0     100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-er.html https://www.fiberstamp.com/100g-sfp56-dd-er.html#respond Tue, 19 Dec 2023 07:51:41 +0000 https://www.fiberstamp.com/?post_type=product&p=10834 FIBERSTAMP 100G SFP56-DD ER optical transceiver modules are purpose-built for facilitating high-speed data transmission in data center 100G Lambda 100G LR1-10 links, as well as supporting 5G fronthaul applications up to distances of 30km across single-mode fiber.

    The post 100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module designed in SFP56-DD form factor
  • Capable of transmission rates up to 106.25Gbps
  • Features a 1×106.25Gb/s (PAM4) optical interface
  • Equipped with 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry integrated into receiver and transmitter channels
  • Compliance with SFP-DD MSA and 100G Lambda MSA standards
  • Supports transmission distances of up to 30km via SMF using FEC Features a duplex LC optical interface
  • Low power consumption of less than 3.5W
  • Includes built-in digital diagnostic functionality
  • Designed for commercial operating temperature ranges
  • Operates with a supply voltage of 3.3V
  • RoHS compliant with lead-free construction
    • P/N Description
    FBD-10031K30C 100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver Modules

    The post 100G SFP56-DD ER1 1310nm 30km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-er.html/feed 0     100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-lr.html https://www.fiberstamp.com/100g-sfp56-dd-lr.html#respond Tue, 19 Dec 2023 05:57:13 +0000 https://www.fiberstamp.com/?post_type=product&p=10832 FIBERSTAMP 100G SFP56-DD LR optical transceiver modules are purpose-built for facilitating high-speed data transmission in data center 100G Lambda 100G LR1-10 links, as well as supporting 5G fronthaul applications up to distances of 10km/20km across single-mode fiber.

    The post 100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in SFP56-DD form factor
  • Transmission rates of up to 106.25Gbps
  • 1×106.25Gb/s (PAM4) optical interface
  • 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry on receiver and transmitter channels
  • Compliant with SFP-DD MSA, 100G Lambda 100G LR1-10 standard
  • Transmission up to 10km/20km on SMF using KP-FEC
  • Duplex LC optical interface
  • Power consumption less than 3.5w
  • Built-in digital diagnostic function
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBD-10031K10C SFP56-DD LR1, 106.25Gb/s, 10km, EML+PIN, SMF, Dual LC
    FBD-10031K20C SFP56-DD LR1, 106.25Gb/s, 20km, EML+PIN, SMF, Dual LC

    The post 100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-lr.html/feed 0