2km-20km - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 18 Jun 2026 10:12:20 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.1 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png 2km-20km - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> Features
  • 8channels full-duplex transceiver modules
  • Supports8×25Gb/s aggregate bit rates
  • Supports8×10Gb/s aggregate bit rates if required
  • 8channels 1310nm DFB
  • 8channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for 652 SMF
  • Single male MPO16(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3Vpower supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100GEthernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0 800G QSFP-DD FR8 Duplex LC EML CWDM 2km Transceiver Module https://www.fiberstamp.com/800g-qsfp-dd-fr8.html https://www.fiberstamp.com/800g-qsfp-dd-fr8.html#respond Mon, 10 Mar 2025 02:29:52 +0000 https://www.fiberstamp.com/?post_type=product&p=13054 The FIBERSTAMP 800G QSFPDD FR8 is a high-speed transceiver module for 2km optical communication. It supports 8 channels at 106.25Gbps each, using CWDM EML lasers and PAM4 technology. The receiver includes 8 photodiodes and two 4-channel TIA arrays. It is compliant with QSFPDD MSA and IEEE 802.3, designed for harsh environments, and features a two-wire serial interface for control.

The post 800G QSFP-DD FR8 Duplex LC EML CWDM 2km Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFPDD MSA and CMIS compliant
  • 8×106.25Gbps(53.125GBd PAM4) electrical interface
  • 8×106.25Gbps(53.125GBd PAM4) optics architecture
  • EML CWDM transmitter
  • PIN and TIA array on the receiver side
  • Power consumption <16W
  • Maximum link length of 2km G.652 SMF with KP-FEC
  • Duplex LC connector
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3.3V power supply voltage
  • RoHS compliant (lead free)

Applications

  • 8x100G Ethernet
  • 1x800G Ethernet
  • Data center network

 

P/N Description
FBL-800C8K02C 800G QSFP-DD FR8 EML CWDM 2km Optical Transceiver Module

The post 800G QSFP-DD FR8 Duplex LC EML CWDM 2km Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-qsfp-dd-fr8.html/feed 0 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp112-lr1.html https://www.fiberstamp.com/100g-sfp112-lr1.html#respond Fri, 29 Nov 2024 08:49:20 +0000 https://www.fiberstamp.com/?post_type=product&p=12855 The Fiberstamp Technologies GSS-SPO101-LR1C is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 10km over Single-Mode Fiber (SMF). The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Full-duplex transceiver modules
  • 25Gb/s PAM4 transmitter and PAM4 receiver
  • 1025Gbps PAM4 based on a cooledEML TOSA transmitter
  • 1025Gbps PAM4 PINReceiver
  • Power consumption <5W
  • Hot Pluggable SFP112form factor
  • Compliant with SFF-DD MSA,CMIS
  • Maximum link length of 10km on G.652 SMF with KP-FEC
  • DuplexLC connector
  • Built-in digital diagnostic functions
  • Operating case temperature:0°C to +70°C
  • +3V power supply
  • RoHS compliant(lead free)

    • The post 100G SFP112 LR1 1310nm 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-lr1.html/feed 0     100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-lr.html https://www.fiberstamp.com/100g-sfp56-dd-lr.html#respond Tue, 19 Dec 2023 05:57:13 +0000 https://www.fiberstamp.com/?post_type=product&p=10832 FIBERSTAMP 100G SFP56-DD LR optical transceiver modules are purpose-built for facilitating high-speed data transmission in data center 100G Lambda 100G LR1-10 links, as well as supporting 5G fronthaul applications up to distances of 10km/20km across single-mode fiber.

    The post 100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in SFP56-DD form factor
  • Transmission rates of up to 106.25Gbps
  • 1×106.25Gb/s (PAM4) optical interface
  • 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry on receiver and transmitter channels
  • Compliant with SFP-DD MSA, 100G Lambda 100G LR1-10 standard
  • Transmission up to 10km/20km on SMF using KP-FEC
  • Duplex LC optical interface
  • Power consumption less than 3.5w
  • Built-in digital diagnostic function
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBD-10031K10C SFP56-DD LR1, 106.25Gb/s, 10km, EML+PIN, SMF, Dual LC
    FBD-10031K20C SFP56-DD LR1, 106.25Gb/s, 20km, EML+PIN, SMF, Dual LC

    The post 100G SFP56-DD LR1 1310nm 10km/20km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-lr.html/feed 0     100G SFP56-DD EML FR1 2km SMF Optical Transceiver https://www.fiberstamp.com/100g-sfp56-dd-fr.html https://www.fiberstamp.com/100g-sfp56-dd-fr.html#respond Tue, 19 Dec 2023 03:23:45 +0000 https://www.fiberstamp.com/?post_type=product&p=10831 FIBERSTAMP 100G SFP56-DD FR optical transceiver is tailored for 100G Lambda 100G LR-10 Ethernet links within data centers and supports 5G fronthaul over single-mode fiber, covering distances of up to 2km.

    The post 100G SFP56-DD EML FR1 2km SMF Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in SFP56 form factor
  • Single-channel 100G PAM4 1304.58nm/1309.14nm cooled EML transmitter and APD receiver
  • Transmission rates of up to 106.25Gbps
  • 1×106.25Gb/s (PAM4) optical interface
  • 2 x 53.125Gb/s (PAM4) electrical interfaces
  • Internal CDR circuitry on receiver and transmitter channels
  • Compliant with SFP-DD MSA, 100G Lambda MSA
  • Built-in 4:1 gearbox DSP on receiver and transmitter channels
  • Transmission up to 2km on SMF using FEC
  • Duplex LC optical interface
  • Built-in digital diagnostic function
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBD-10031K02C 100G SFP56-DD EML FR1 2km SMF Optical Transceiver

    The post 100G SFP56-DD EML FR1 2km SMF Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp56-dd-fr.html/feed 0     400G QSFP-DD FR4 EML CWDM4 2km SMF LC Optical Transceiver https://www.fiberstamp.com/400g-qsfp-dd-fr4.html https://www.fiberstamp.com/400g-qsfp-dd-fr4.html#respond Tue, 19 Dec 2023 02:49:30 +0000 https://www.fiberstamp.com/?post_type=product&p=10828 FIBERSTAMP 400G QSFP-DD FR4 optical transceiver module adopts single-wavelength 100G PAM4 and silicon photonics integration technology, which is widely used in 400GBASE-FR4 Ethernet links, and the transmission distance can reach up to 2km.

    The post 400G QSFP-DD FR4 EML CWDM4 2km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver integrated module in QSFP-DD hot-pluggable package
  • 4-channel CWDM EML and PIN
  • The transmission rate per channel can reach up to 106.25Gbps (100G PAM4)
  • Compliant with QSFP-DD MSA and IEEE 802.3cu 400GBASE-LR4-6 and 100G
  • Lambda MSA 400G-LR4-10 standards
  • Utilizes a single pair of single-mode optical fibers, supporting distances of up to 2km
  • Power consumption is less than 10W
  • Dual LC optical port
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N & Data Sheet Description
    FBL-400C4K02C 400G QSFP-DD FR4 Optical Module

    The post 400G QSFP-DD FR4 EML CWDM4 2km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-fr4.html/feed 0     Immersible 25G SFP28 BiDi LR 10km Optical Modules https://www.fiberstamp.com/immersible-25g-sfp28-bidi-lr.html https://www.fiberstamp.com/immersible-25g-sfp28-bidi-lr.html#respond Fri, 15 Dec 2023 10:18:39 +0000 https://www.fiberstamp.com/?post_type=product&p=10798 FIBERSTAMP s 25G SFP28 BiDi LR optical modules, adapted for submerged liquid-cooled data centers, enable transmission over single-mode fiber for distances of up to 10km.

    The post Immersible 25G SFP28 BiDi LR 10km Optical Modules first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable SFP28 transceiver modules with LC pigtail
  • Full duplex transceiver module
  • 1270/1310nm DFB laser and PIN photodetector
  • Compliant with SFP28 MSA and IEEE 802.3cc 25GBASE-LR Ethernet standard
  • Transmission distance up to 10km over single-mode optical fiber
  • Data rate up to 25.78125Gbps
  • Maximum power consumption less than 1W
  • Case operating temperature range: 0°C to 70°C
  • Single LC pigtail
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)
    • P/N Description
    FRC-M2523K10xxx Immersible 25G SFP28 BiDi LR 10km Optical Modules

    The post Immersible 25G SFP28 BiDi LR 10km Optical Modules first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-25g-sfp28-bidi-lr.html/feed 0     SiPh 400G QSFP-DD LR4 CWDM4 10km SMF LC Optical Transceiver https://www.fiberstamp.com/siph-400g-qsfp-dd-lr4.html https://www.fiberstamp.com/siph-400g-qsfp-dd-lr4.html#respond Fri, 15 Dec 2023 06:14:02 +0000 https://www.fiberstamp.com/?post_type=product&p=10754 FIBERSTAMP's silicon-based 400G QSFP-DD LR4 optical transceiver is tailored for mid-to-long-range data center connections. It aligns with 100G Lambda MSA 400G-LR4-10 standards and IEEE 802.3cu 400GBASE-LR4 Ethernet protocol. This module integrates a 4-channel CWDM MUX and DEMUX with central wavelengths at 1271nm, 1291nm, 1311nm, and 1331nm, enabling distances of up to 10km (FEC enabled) through a pair of single-mode optical fibers

    The post SiPh 400G QSFP-DD LR4 CWDM4 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • An integrated full-duplex transceiver module employing QSFP-DD hot-pluggable form factor.
  • Transmitters and receivers designed with a 4-channel CWDM silicon optics.
  • Each channel supports a maximum transmission rate of 106.25Gbps (100G PAM4).
  • Compliant with QSFP-DD MSA and 100G Lambda MSA 400G-LR4-10 specifications.
  • Compatible with IEEE 802.3cu 400GBASE-LR4 Ethernet transmission protocols.
  • Utilizes a pair of single-mode optical fibers, reaching distances up to 10km (FEC enabled).
  • Power consumption less than 11W.
  • Dual LC optical ports.
  • Operates within a commercial-grade temperature range.
  • Operating voltage of 3.3V.
  • Complies with RoHS environmental standards (lead-free).
    • P/N & Data Sheet Description
    FTL-400C4K10C SiPh 400G QSFP-DD LR4 CWDM4 10km Optical Transceiver

    The post SiPh 400G QSFP-DD LR4 CWDM4 10km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/siph-400g-qsfp-dd-lr4.html/feed 0     SiPh 400G QSFP-DD DR4++ 1310nm 10km SMF MPO Optical Transceiver https://www.fiberstamp.com/siph-400g-qsfp-dd-dr4-10km.html https://www.fiberstamp.com/siph-400g-qsfp-dd-dr4-10km.html#respond Fri, 15 Dec 2023 05:53:44 +0000 https://www.fiberstamp.com/?post_type=product&p=10752 FIBERSTAMP 400G QSFP-DD DR4++ Silicon Optical Module extends the reach of DR4 for longer transmission distances. Compliant with IEEE 802.3bs 400GBASE-DR4, it supports 400G Ethernet rates (425Gb/s) for full-duplex links covering distances up to 10km. Leveraging the cost efficiency of silicon optical technology and the low device cost of single-lambda 100G PAM4 modulation and parallel optical engine technology, this module stands as a highly cost-effective solution for 400G interconnects within data centers

    The post SiPh 400G QSFP-DD DR4++ 1310nm 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Use hot-pluggable QSFP-DD package
  • 4-channel full-duplex transceiver integrated module
  • Rate up to 425Gbps
  • Compliant with QSFP-DD MSA and IEEE 802.3bs 400GBASE-DR4 Ethernet standards
  • Transmission distance up to 10km via single-mode optical fiber (FEC needs to be turned on)
  • MPO12/APC optical interface
  • Maximum power consumption<12W
  • Commercial grade operating temperature range from 0 to 70°C
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N & Data Sheet Description
    FUL-400P4K10C SiPh 400G QSFP-DD DR4++  1310nm 10km Optical Transceiver Module

    The post SiPh 400G QSFP-DD DR4++ 1310nm 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/siph-400g-qsfp-dd-dr4-10km.html/feed 0     SiPh 800G QSFP-DD DR8++ 1310nm 10km SMF MPO Optical Transceiver https://www.fiberstamp.com/siph-800g-qsfp-dr8-10km.html https://www.fiberstamp.com/siph-800g-qsfp-dr8-10km.html#respond Fri, 15 Dec 2023 03:41:36 +0000 https://www.fiberstamp.com/?post_type=product&p=10745 FIBERSTAMP's 800G QSFP-DD DR8++ silicon photonics hot-pluggable optical modules are engineered with silicon photonics integration for 800GBASE-DR8 Ethernet links within data centers. Utilizing 100G PAM4 and 8-way single-mode parallel technology, these modules support transmission distances of up to 10km.

    The post SiPh 800G QSFP-DD DR8++ 1310nm 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8-channel full-duplex transceiver integrated module in QSFP-DD hot-pluggable package
  • Data rate up to 850Gbps
  • Compliant with QSFP MSA, CMIS 4.0 and 800G Ethernet transport protocols
  • Transmission using single fiber at distances up to 10km (with FEC on)
  • MPO16/APC optical interfaces
  • Power consumption less than 18W
  • Supports CMIS version 4.0 protocol
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FUL-800P4K10C SiPh 800G QSFP-DD DR8++ 1310nm 10km Optical Transceiver

    The post SiPh 800G QSFP-DD DR8++ 1310nm 10km SMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/siph-800g-qsfp-dr8-10km.html/feed 0