InfiniBand - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 30 Jul 2026 10:10:33 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png InfiniBand - FIBERSTAMP https://www.fiberstamp.com 32 32 12G-SDI DWDM SFP Optical Transceiver 10km/30km Reach https://www.fiberstamp.com/12g-sdi-dwdm-sfp.html https://www.fiberstamp.com/12g-sdi-dwdm-sfp.html#respond Wed, 29 Jul 2026 09:18:56 +0000 https://www.fiberstamp.com/?post_type=product&p=15297 FIBERSTAMP’s 12G-SDI DWDM SFP Optical Transceiver is designed to transmit/receive data rates from 50Mbps to 11.88Gbps，compliant with SMPTE ST 2082-1 (12G UHD-SDI), ST 2081-1 (6G UHD-SDI), ST424 (3G SDI), ST 292-1 (HD-SDI), and ST 259 (SD-SDI). FIBERSTAMP’s Video transceiver supports SDI pathological patterns signals.

The transceiver includes threse sections: a cooled DWDM DML transmitter, a PIN/APD photodiode integrated with a trans-impedance preamplifier (TIA) ,Reclocker ,and a MCU controller. The transceiver is compliant with SFP Multi-Source Agreement (MSA) .

The post 12G-SDI DWDM SFP Optical Transceiver 10km/30km Reach first appeared on FIBERSTAMP.

]]> Features

  • SD/HD/3G/6G/12G-SDI SFP Transceiver
  • ST 259, ST 292-1,ST 424, ST-2081 and ST-2082 compatible
  • Metal enclosure for Lower EMI
  • DFB laser transmitter
  • Supports SDI pathological patterns for SD-SDI,HD-SDI, 3G-SDI,6G-SDI and 12G SDI
  • Compliant with SFP MSA
  • Duplex LC connector
  • The module’s receiver contains reclocker
  • ROHS compliant(lead free)
  • single 3.3V power supply
  • Hot-pluggable SFP footprint
  • Operating case temperature range：0 to +70°C

Applications

  • ST 259, ST 292-1, ST 424, ST-2081 and ST-2082 Electrical-to-Optical Interfaces
  • UHDTV/HDTV/SDTV Service Interfaces

The post 12G-SDI DWDM SFP Optical Transceiver 10km/30km Reach first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/12g-sdi-dwdm-sfp.html/feed 0 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html#respond Wed, 22 Jul 2026 09:03:26 +0000 https://www.fiberstamp.com/?post_type=product&p=15264 FIBERSTAMP 200G QSFP DD PSM8 20km Optical Transceiver is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16/ 24 fiber MTP (MPO) connector. This module incorporates FIBERSTAMP Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> Features

  • 8 channels full-duplex transceiver modules
  • Supports 8×25Gb/s aggregate bit rates
  • Supports 8×10Gb/s aggregate bit rates if required
  • 8 channels 1310nm DFB
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for G.652 SMF
  • Single male MPO16/MPO24(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100G Ethernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

 

P/N & Data Sheet Description
FEL-200P8K02C16 200GE QSFP-DD PSM8 DML 1310nm 20km MPO16 Optical Modules
FEL-200P8K10C24 200GE QSFP-DD PSM8 DML 1310nm 20km MPO24 Optical Modules

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html/feed 0 FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp-dd-sr4.html https://www.fiberstamp.com/200g-qsfp-dd-sr4.html#respond Fri, 03 Jul 2026 08:45:20 +0000 https://www.fiberstamp.com/?post_type=product&p=15129 The FIBERSTAMP 200G QSFP DD SR4 is a Pluggable, Parallel, Fiber-Optic QSFP Double Density for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with KP-FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface 200GAUI-8(no FEC)1 uses a 76 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 4x53Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array
    • 4 channels PIN photo detector array
    • Internal 8:4 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Power consumption <7W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with KP-FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3bs 200GBASE-SR4

    • The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr4.html/feed 0     400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html#respond Mon, 22 Jun 2026 07:58:17 +0000 https://www.fiberstamp.com/?post_type=product&p=15005 The FIBERSTAMP 400G QSFP-DD PSM O-band DWDM4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 400G or 200G Ethernet Metro-Access over DWDM applications and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP-DD MSA and CMIS compliant
    • Compliantto 802.3bs 400GBASE-DR4
    • 125Gbit/s PAM4 electrical interface(400GAUI-8)
    • 25Gbps(53.125GBd PAM4)Optics architecture
    • Power consumption <11W
    • Maximum link length of 10km G.652 SMF with KP-FEC
    • Up to 30 km when equipped with an external SOA
    • MPO-12 receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE 802.3bs 400GBASE-DR4
    • Data center network

    The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html/feed 0     FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

    ]]>     Features
    • 8channels full-duplex transceiver modules
    • Supports8×25Gb/s aggregate bit rates
    • Supports8×10Gb/s aggregate bit rates if required
    • 8channels 1310nm DFB
    • 8channels PIN photo detector array
    • Internal CDR circuits on both receiver and transmitter channels
    • Support CDR bypass
    • Low power consumption <6.5W
    • Hot Pluggable QSFP DD form factor
    • Up to 20km reach for 652 SMF
    • Single male MPO16(APC 8-degree) connector receptacle
    • Operating case temperature 0°C to +70°C
    • 3Vpower supply voltage
    • RoHS compliant (lead free)

    Applications

      • 2×100GEthernet links
      • Infiniband DDR/EDR
      • Datacenter and Enterprise networking

    The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0     400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html#respond Mon, 30 Mar 2026 09:39:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14848 FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.

    FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

    The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP56-DD and QSFP28form factor
    • QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
    • Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
    • 8x 50Gb/s PAM4 modulation
    • Low power dissipation <9W (400G End)
    • Low power dissipation <4.5W (100G End)
    • RoHS-6 compliant (lead-free)
    • Commercial case temperature range of 0°C to 70°C
    • Single 3.3V power supply
    • Maximum link length of 70m on OM3 MMF
      and 100m on OM4 & OM5 MMF
    • Uncooled 850nm VCSEL array (both End)
    • PIN photo detector array (both End)
    • 400GBASE-SR8 and 100GBASE-SR2 compliant
    • I2C management interface
    • CMIS V4.0 compliant

     

    Applications

    • IEEE 802.3cd&nbsp100GBASE-SR2 Ethernet (PAM4)
    • IEEE 802.3cd&nbsp400GBASE-SR8 Ethernet (PAM4)

    The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html/feed 0     FIBERSTAMP 800G QSFP-DD to 2x400G QSFP112 Active Copper Cable ACC https://www.fiberstamp.com/800g-qsfp-dd-to-2x400g-qsfp112-acc.html https://www.fiberstamp.com/800g-qsfp-dd-to-2x400g-qsfp112-acc.html#respond Sat, 11 Oct 2025 10:11:28 +0000 https://www.fiberstamp.com/?post_type=product&p=13852 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

    FIBERSTAMP’s FZL2J-800XXM05C cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the dual QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with QSFP-DD MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

    The post FIBERSTAMP 800G QSFP-DD to 2x400G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP-DD&QSFP112 form factor
    • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
    • Support up to 5m length
    • 100 ohm differential impedance system
    • 3V power supply & typical power consumption 2.5W
    • Commercial case temperature range of 0°C to 70°C
    • I2C management

    Applications

    • Infiniband NDR/HDR/EDR
    • Switch / router / HBA
    • Enterprise network
    • Data Center Network
    • Data storage and communication industry

    STANDARDS COMPLIANCE

    • IEEE P802.3ck D3.0
    • QSFP-DD/QSFP112 MSA HW Rev 6.01
    • CMIS 4.0
    • RoHS

    The post FIBERSTAMP 800G QSFP-DD to 2x400G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-qsfp-dd-to-2x400g-qsfp112-acc.html/feed 0     800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC https://www.fiberstamp.com/800g-qsfp-dd-to-4x200g-qsfp112-acc.html https://www.fiberstamp.com/800g-qsfp-dd-to-4x200g-qsfp112-acc.html#respond Sat, 11 Oct 2025 09:58:50 +0000 https://www.fiberstamp.com/?post_type=product&p=13848 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

    FIBERSTAMP’s FZL4J-800XXM05C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s, each QSFP-DD/QSFP112 port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface, it’s a high performance & cost effective I/O solutions for LAN, HPC and SAN.

    The post 800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP-DD and QSFP112 form factor
    • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
    • Support up to 5m length
    • 100 ohm differential impedance system
    • 3V power supply & typical power consumption 3.5W
    • Commercial case temperature range of 0°C to 70°C
    • I2C management

    Applications

    • Infiniband NDR/HDR/EDR
    • Switch / router / HBA
    • Enterprise network
    • Data Center Network
    • Data storage and communication industry

    STANDARDS COMPLIANCE

    • IEEE P802.3ck D3.0
    • QSFP-DD/QSFP112 MSA HW Rev 6.01
    • CMIS 4.0
    • RoHS

     

    The post 800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-qsfp-dd-to-4x200g-qsfp112-acc.html/feed 0     800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html#respond Mon, 08 Sep 2025 02:58:34 +0000 https://www.fiberstamp.com/?post_type=product&p=13809 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

    FIBERSTAMP’s FWU4J-800xxxxxC cable connects data signals from each of the 16 pairs on the single OSFP end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP-MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

    The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug OSFP CTHS and QSFP112 form factor
    • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
    • Support up to 5m length
    • 100Ohm differential impedance system
    • 3V power supply & typical power consumption 3.5W
    • Commercial case temperature range of 0°C to 70°C
    • I2C management

    Applications

    • Infiniband NDR/HDR/EDR
    • Switch / router / HBA
    • Enterprise network
    • Data Center Network
    • Data storage and communication industry

    STANDARDS COMPLIANCE

    • IEEE P802.3ck D3.0
    • QSFP-DD MSA HW Rev 4.1
    • QSFP112 MSA HW Rev 6.01
    • CMIS 4.0
    • RoHS

    The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html/feed 0     800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html#respond Mon, 08 Sep 2025 02:46:30 +0000 https://www.fiberstamp.com/?post_type=product&p=13807 FIBERSTAMP’s 800G OSFP to 4x200G OSFP cable assembly splitter is effective alternative to fiber optics. The cable

    connects data signals from each of the 16 pairs on the single OSFP end to the quad OSFP RHS ends, each pair

    operates at data rates of up to 100Gb/s, each OSFP/OSFP RHS port can be addressed by EEPROM to provide

    product information, which can be read or write by I2C interface.

    FIBERSTAMP’s FWU4U-800xxxxxC cable assembly splitter is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high

    performance, lowest-cost &latency &power consumption I/O solutions for LAN, HPC and SAN. The high speed cable

    assemblies meet and exceed 800 Gigabit Ethernet, InfiniBand EDR /HDR/NDR and temperature requirements for

    performance and reliability.

    The height of OSFP CTHS (Close Top Heat Sink) is fully compliant with OSFP finned top, OSFP RHS(Riding Heat Sink)

    also can be called flat top, it’s a little bit lower than OSFP CTHS.

    The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

    ]]>     Features

     Hot-plug OSFP CTHS and OSFP RHS form factor

     Support 8x 50/100Gb/s PAM4 modulation

     Commercial case temperature range of 0°C to 70°C

     26 AWG ~30 AWG support up to 2m length above

     Contain EEPROM & programmable to customized

     

    Applications

     Data storage and communication industry

     Switch / Router / HBA/NIC

     Enterprise network

     Data Center Network

     Infiniband

     

    STANDARDS COMPLIANCE

     IEEE P802.3ck D3.0

     OSFP MSA HW Rev 4.1

     ROHS

     

    The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html/feed 0