Fibre Channel - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 12 Jun 2026 09:35:19 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Fibre Channel - FIBERSTAMP https://www.fiberstamp.com 32 32 128GFC QSFP28 Active Optical Cables 4x28G NRZ, Enhanced, 300Meters(984ft) https://www.fiberstamp.com/128gfc-qsfp28-eaoc.html https://www.fiberstamp.com/128gfc-qsfp28-eaoc.html#respond Mon, 14 Aug 2023 01:59:32 +0000 https://www.fiberstamp.com/?post_type=product&p=9449 FIBERSTAMP 128GFC QSFP28 AOC enhanced active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with 128GFC/4x32GFC fiber channel transmission protocol and is compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, the center wavelength is 850nm, and the distance can reach up to 200m (OM3) or 300m (OM4).

The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, Enhanced, 300Meters(984ft) first appeared on FIBERSTAMP.

]]>
  • An active optical cable assembly with a 128GFC QSFP28 SR4 optical transceiver module integrated at each end
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • An active optical cable assembly with a 128GFC QSFP28 eSR4 optical transceiver module integrated at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 28.05Gbps
  • Receive and transmit channel built-in CDR circuit, support CDR bypass
  • Compliant with QSFP28 MSA and 128GFC/4x32GFC fiber channel transmission protocol
  • Compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, when FEC is not turned on, the distance can reach up to 70m (OM3) or 100m (OM4)
  • When FEC is turned on, the distance can reach up to 200m (OM3) or 300m (OM4)
  • Power consumption less than 2W (per 128GFC QSFP28 eSR4 module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYG-E112MxxxC 128GFC QSFP28 AOC(Enhanced)

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, Enhanced, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/128gfc-qsfp28-eaoc.html/feed 0     128GFC QSFP28 Active Optical Cables 4x28G NRZ, 100Meters(328ft) https://www.fiberstamp.com/128gfc-qsfp28-aoc-100m.html https://www.fiberstamp.com/128gfc-qsfp28-aoc-100m.html#respond Mon, 14 Aug 2023 01:52:48 +0000 https://www.fiberstamp.com/?post_type=product&p=9448 FIBERSTAMP 128GFC QSFP28 AOC  active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with 128GFC/4x32GFC fiber channel transmission protocol and is compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, the center wavelength is 850nm, and the distance can reach up to 70m (OM3) or 100m (OM4).

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly with a 128GFC QSFP28 SR4 optical transceiver module integrated at each end
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 28.05Gbps
  • Receive and transmit channel built-in CDR circuit, support CDR bypass
  • Compliant with QSFP28 MSA and 128GFC/4x32GFC fiber channel transmission protocol
  • Compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m (OM4)
  • Power consumption less than 2W (per 128GFC QSFP28 SR4 module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYG-112MxxxC 128GFC QSFP28 AOC

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/128gfc-qsfp28-aoc-100m.html/feed 0     56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) https://www.fiberstamp.com/56g-qsfp-plus-aoc.html https://www.fiberstamp.com/56g-qsfp-plus-aoc.html#respond Fri, 11 Aug 2023 09:32:55 +0000 https://www.fiberstamp.com/?post_type=product&p=9432 FIBERSTAMP 56G QSFP+ AOC active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with the 4x16GFC fiber channel transmission protocol and is compatible with the InfiniBand FDR transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3) or 150m (OM4).

    The post 56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating a 56G QSFP+ SR4 optical transceiver module at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 14.0625Gbps
  • Compliant with QSFP+ MSA (SFF-8436) and 4x16GFC fiber channel transmission protocol
  • Compatible with InfiniBand FDR transport protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 100m (OM3) or 150m (OM4)
  • Power consumption is less than 1.5W (each 56G QSFP+ SR4 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF-F56MxxxC 56G QSFP+ AOC

    The post 56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/56g-qsfp-plus-aoc.html/feed 0     56G QSFP28 Active Optical Cables 2×28/25G NRZ, 100Meters(328ft) https://www.fiberstamp.com/56g-qsfp28-aoc-100m.html https://www.fiberstamp.com/56g-qsfp28-aoc-100m.html#respond Fri, 11 Aug 2023 09:21:01 +0000 https://www.fiberstamp.com/?post_type=product&p=9430 FIBERSTAMP 56G QSFP28 AOC active optical cable is used for short-distance interconnection between internal devices in the data center, conforms to the 2x32GFC fiber channel transmission protocol, and is also compatible with IEEE 802.3by 25GBASE-SR and IEEE 802.3ba 40GBASE-SR4 Ethernet transmission protocols, And InfiniBand FDR/EDR transmission protocol. This series of products uses 2 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m (OM4).

    The post 56G QSFP28 Active Optical Cables 2×28/25G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly with a 56G QSFP28 SR2 optical transceiver module integrated at each end
  • Each side contains 2 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 28.05Gbps
  • Compliant with QSFP28 MSA and 2x32GFC fiber channel transmission protocol
  • Compatible with IEEE 802.3by 25GBASE-SR and IEEE 802.3ba 40GBASE-SR4 Ethernet transmission protocols
  • Compatible with InfiniBand FDR/EDR transmission protocol
  • Using 2 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m (OM4)
  • Power consumption is less than 1.5W (each 56G QSFP28 SR2 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYG-F56MxxxC

    The post 56G QSFP28 Active Optical Cables 2×28/25G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/56g-qsfp28-aoc-100m.html/feed 0     100G QSFP28 ER4 DML LWDM4 SMF LC 40km Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-er4.html https://www.fiberstamp.com/100g-qsfp28-er4.html#respond Wed, 09 Aug 2023 06:29:13 +0000 https://www.fiberstamp.com/?post_type=product&p=9245 FIBERSTAMP 100G QSFP28 ER4 optical transceiver module is used for long-distance transmission in the field of data communication or telecom, which is compliant with 100G Ethernet transmission protocol and compatible with OTN OTU4 transmission protocol. It has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 40km (without FEC on).

    The post 100G QSFP28 ER4 DML LWDM4 SMF LC 40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM EML uncooled transmitter and APD ROSA
  • Transmission rates of up to 27.95Gbps per channel
  • Compliant with QSFP28 MSA, and 100GE Ethernet transport protocol
  • Optional multi-rate versions compatible with 100G Ethernet and OTN OTU4
  • Backward compatible with IEEE 802.3ba 100GBASE-ER4 and InfiniBand FDR transport protocols
  • Distance up to 40km (without FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 6w
  • Dual LC optical connectors
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-100L4K40C 100GE QSFP28 ER4 EML LWDM4 40km Optical Module
    FBG-112L4K40C 100GE/OTU4 QSFP28 ER4 EML LWDM4 40km Optical Module

    The post 100G QSFP28 ER4 DML LWDM4 SMF LC 40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-er4.html/feed 0     100G QSFP28 ER4 Lite DML LWDM4 SMF LC 30km/40km Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-er4-lite.html https://www.fiberstamp.com/100g-qsfp28-er4-lite.html#respond Wed, 09 Aug 2023 02:22:43 +0000 https://www.fiberstamp.com/?post_type=product&p=9226 FIBERSTAMP  100G QSFP28 ER4 optical transceiver module is used for long-distance transmission in the field of data communication or telecom, which is compliant with 100G Ethernet transmission protocol and compatible with OTN OTU4 transmission protocol. It has a built-in pair of 4-channel LWDM MUX and DEMUX with center wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, respectively, and uses a pair of single-mode fibers for transmission over distances up to 30km (without FEC) or 40km (with FEC).

    The post 100G QSFP28 ER4 Lite DML LWDM4 SMF LC 30km/40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable, full-duplex transceiver module packaged in QSFP28 form factor
  • 4 channels LAN-WDM DML uncooled transmitter and APD ROSA
  • Transmission rates of up to 25.78125Gbps or 27.95Gbps per channel
  • Built-in CDR circuitry for receive and transmit channels
  • Compliant with QSFP28 MSA, and 100GE Ethernet transport protocol
  • Optional multi-rate versions compatible with 100G Ethernet and OTN OTU4
  • Compatible with InfiniBand HDR transport protocols
  • Distance up to 30km (without FEC on) or 40km (with FEC on) using 1 pair of single-mode fibers
  • Power consumption less than 3.8w
  • Dual LC optical connectors
  • Commercial operating temperature range
  • Supply voltage 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FBG-100L4K40CL 100GE QSFP28 ER4 Lite DML LWDM4 30km/40km Optical Module
    FBG-112L4K40CL 100GE/OTU4 QSFP28 ER4 Lite DML LWDM4 30km/40km Optical Module

    The post 100G QSFP28 ER4 Lite DML LWDM4 SMF LC 30km/40km Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-er4-lite.html/feed 0