CPRI/eCPRI - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 22 Jul 2026 09:25:16 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png CPRI/eCPRI - FIBERSTAMP https://www.fiberstamp.com 32 32 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html#respond Wed, 22 Jul 2026 09:03:26 +0000 https://www.fiberstamp.com/?post_type=product&p=15264 FIBERSTAMP 200G QSFP DD PSM8 20km Optical Transceiver is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16/ 24 fiber MTP (MPO) connector. This module incorporates FIBERSTAMP Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> Features

  • 8 channels full-duplex transceiver modules
  • Supports 8×25Gb/s aggregate bit rates
  • Supports 8×10Gb/s aggregate bit rates if required
  • 8 channels 1310nm DFB
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for G.652 SMF
  • Single male MPO16/MPO24(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100G Ethernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

 

P/N & Data Sheet Description
FEL-200P8K02C16 200GE QSFP-DD PSM8 DML 1310nm 20km MPO16 Optical Modules
FEL-200P8K10C24 200GE QSFP-DD PSM8 DML 1310nm 20km MPO24 Optical Modules

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html/feed 0 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html#respond Mon, 22 Jun 2026 07:58:17 +0000 https://www.fiberstamp.com/?post_type=product&p=15005 The FIBERSTAMP 400G QSFP-DD PSM O-band DWDM4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 400G or 200G Ethernet Metro-Access over DWDM applications and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA and CMIS compliant
  • Compliantto 802.3bs 400GBASE-DR4
  • 125Gbit/s PAM4 electrical interface(400GAUI-8)
  • 25Gbps(53.125GBd PAM4)Optics architecture
  • Power consumption <11W
  • Maximum link length of 10km G.652 SMF with KP-FEC
  • Up to 30 km when equipped with an external SOA
  • MPO-12 receptacles
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3bs 400GBASE-DR4
  • Data center network

The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html/feed 0 FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> Features
  • 8channels full-duplex transceiver modules
  • Supports8×25Gb/s aggregate bit rates
  • Supports8×10Gb/s aggregate bit rates if required
  • 8channels 1310nm DFB
  • 8channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for 652 SMF
  • Single male MPO16(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3Vpower supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100GEthernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0 100G QSFP28 Hardened Active Optical Cable https://www.fiberstamp.com/100g-qsfp28-haoc.html-2 https://www.fiberstamp.com/100g-qsfp28-haoc.html-2#respond Tue, 26 Aug 2025 03:38:29 +0000 https://www.fiberstamp.com/?post_type=product&p=13768 The FIBERSTAMP Technologies 100G QSFP28 HAOC is a four-channel, pluggable, parallel fiber-optic transceiver designed for 100G or 40G Ethernet and InfiniBand FDR/EDR applications. This high-performance module is ideal for short-range, multi-lane data communications and interconnect deployments.

Built with a ruggedized optical cable structure featuring a stainless steel tube, Kevlar reinforcement, and an LSZH jacket, delivering reliable performance over distances of up to 70 meters on OM3 multimode fiber. Engineered for long-term durability and resistance to harsh environments, it ensures superior reliability for demanding applications.

The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

]]> Features

▪ 4 channels full-duplex transceiver modules
▪ Transmission data rate up to 25Gbps per channel ▪ Support 40GE and 56G FDR data rate
▪ 4 channels 850nm VCSEL array
▪ 4 channels PIN photo detector array
▪ Internal CDR circuits on both receiver and transmitter channels
▪ Support CDR bypass
▪ Low power consumption <2W
▪ Hot Pluggable QSFP form factor ▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF)
▪ Single MPO connector receptacle
▪ Operating case temperature -40°C to +85°C
▪ 3.3V power supply voltage
▪ RoHS compliant(lead-free)
▪ Hardened active optical cable with metal tube and Kevlar strengthen

Applications

▪ IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
▪ Infiniband FDR/EDR

The post 100G QSFP28 Hardened Active Optical Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/100g-qsfp28-haoc.html-2/feed 0 100G QSFP28 Hardened AOC https://www.fiberstamp.com/100g-qsfp28-haoc.html https://www.fiberstamp.com/100g-qsfp28-haoc.html#respond Fri, 11 Aug 2023 08:10:20 +0000 https://www.fiberstamp.com/?post_type=product&p=9425 FIBERSTAMP 100G QSFP28 pluggable hardened active optical cable assemblies support 100G Ethernet, InfiniBand EDR and CPRI Option 10 data rates.

The post 100G QSFP28 Hardened AOC first appeared on FIBERSTAMP.

]]>
  • Hot-pluggable QSFP28 armored active optical cable assemblies
  • 4x 25G NRZ electrical interface
  • 4x 25G NRZ optical interface
  • Data rate up to 25.78125Gbps per channel
  • Compliant with QSFP28 MSA, 100GBASE-SR4 Ethernet, InfiniBand EDR and CPRI Option 10
  • Low power dissipation
  • Industrial case operating temperature range
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)
    • P/N Description
    FYG-100MxxxTH 100G QSFP28 HAOC

    The post 100G QSFP28 Hardened AOC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-haoc.html/feed 0     50G SFP56 DWDM EML 80km SMF LC Optical Transceiver Module (Industrial Grade Optional) https://www.fiberstamp.com/50g-sfp56-dwdm.html https://www.fiberstamp.com/50g-sfp56-dwdm.html#respond Thu, 10 Aug 2023 08:47:33 +0000 https://www.fiberstamp.com/?post_type=product&p=9363 FIBERSTAMP 50G SFP56 DWDM optical transceiver module is used for 5G fronthaul, conforms to 50 Ethernet transmission protocol, and is also compatible with 50G eCPRI transmission protocol. This series of products uses 1 pair of single-mode optical fiber transmission, C-band 100GHz C18-C61 44 working wavelengths are optional, the distance can reach up to 80km (EDFA and DCM are required), and the working temperature range of industrial grade is optional.

    The post 50G SFP56 DWDM EML 80km SMF LC Optical Transceiver Module (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver integrated module in SFP56 hot-pluggable package
  • Single channel DWDM (C-band 100GHz C18-C61 44 wavelengths optional) EML and PIN
  • Transmission rate up to 53.125Gbps (50G PAM4)
  • Compliant with SFP56 MSA and 50G Ethernet transmission protocol
  • Compatible with 50G eCPRI transmission protocol
  • Using a single single-mode fiber transmission, the distance can reach up to 80km (requires EDFA and DCM)
  • Power consumption is less than 3.1W
  • Single LC optical interface
  • Available in commercial and industrial temperature ranges
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FBD-E50DxxK05T Industrial Grade 50GE/eCPRI SFP56 DWDM EML 100GHz C18-C61 80km Optical Transceiver Module

    The post 50G SFP56 DWDM EML 80km SMF LC Optical Transceiver Module (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/50g-sfp56-dwdm.html/feed 0     25G SFP28 ER EML 1310nm 30km/40km SMF LC Optical Transceiver (Industrial Grade Optional) https://www.fiberstamp.com/25g-sfp28-er.html https://www.fiberstamp.com/25g-sfp28-er.html#respond Thu, 10 Aug 2023 08:28:40 +0000 https://www.fiberstamp.com/?post_type=product&p=9362 FIBERSTAMP 25G SFP28 ER optical transceiver module is used for 5G fronthaul, conforms to IEEE 802.3cc 25GBASE-ER Ethernet transmission protocol, and is also compatible with CPRI Option 10 and 25G eCPRI transmission protocol. This series of products uses a pair of single-mode optical fiber for transmission, with a center wavelength of 1310nm, a distance of up to 30km (without FEC) or 40km (with FEC turned on), and an optional industrial-grade operating temperature range.

    The post 25G SFP28 ER EML 1310nm 30km/40km SMF LC Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver integrated module in SFP28 hot-pluggable package
  • Single channel 1310nm EML and APD
  • Transmission rate up to 25.78125Gbps
  • Compliant with SFP56 MSA and IEEE 802.3cc 25GBASE-ER Ethernet transmission protocol
  • Compatible with CPRI Option 10 and 25G eCPRI transmission protocol
  • Using 1 pair of single-mode fiber transmission, the distance can reach up to 30km (without FEC) or
  • 40km (with FEC enabled)
  • Dual LC optical interface
  • Available in commercial and industrial temperature ranges
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FBC-D2531K40T Industrial Grade 25GE/eCPRI SFP28 ER EML 1310nm 30km/40km Optical Transceiver

    The post 25G SFP28 ER EML 1310nm 30km/40km SMF LC Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/25g-sfp28-er.html/feed 0     50G SFP56 ER EML 1310nm 40km Optical Transceiver (Industrial Grade Optional) https://www.fiberstamp.com/50g-sfp56-er.html https://www.fiberstamp.com/50g-sfp56-er.html#respond Thu, 10 Aug 2023 08:03:41 +0000 https://www.fiberstamp.com/?post_type=product&p=9359 FIBERSTAMP 50G SFP56 ER optical transceiver module is used for 5G fronthaul, conforms to IEEE 802.3cn 50GBASE-ER Ethernet transmission protocol, and is compatible with 50G eCPRI transmission protocol. This series of products uses a pair of single-mode optical fiber transmission, the center wavelength is 1310nm, the distance can reach up to 40km, and the working temperature range of industrial grade is optional

    The post 50G SFP56 ER EML 1310nm 40km Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver integrated module in SFP56 hot-pluggable package
  • Single channel 1310nm EML and APD
  • Transmission rate up to 53.125Gbps (50G PAM4)
  • Comply with SFP56 MSA and IEEE 802.3cn 50GBASE-ER Ethernet transmission protocol
  • Compatible with 50G eCPRI transmission protocol
  • Using 1 pair of single-mode optical fiber transmission, the distance can reach up to 40km
  • Dual LC optical interface
  • Available in commercial and industrial temperature ranges
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N & Data Sheet Description
    FBD-E5031K40T 50G SFP56 ER optical module, 50GE/eCPRI, 40km, commercial grade

    The post 50G SFP56 ER EML 1310nm 40km Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/50g-sfp56-er.html/feed 0     25G SFP28 DWDM EML 100GHz 2km/10km SMF LC Optical Transceiver (Industrial Grade Optional) https://www.fiberstamp.com/25g-sfp28-dwdm.html https://www.fiberstamp.com/25g-sfp28-dwdm.html#respond Wed, 09 Aug 2023 07:59:12 +0000 https://www.fiberstamp.com/?post_type=product&p=9318 FIBERSTAMP 25G SFP28 DWDM optical transceiver modules for 5G fronthaul are compliant with 25 Ethernet transmission protocols and compatible with 25G eCPRI transmission protocols. The series uses 1 pair of single-mode fiber for transmission, C-band 100GHz C18-C61 44 operating wavelengths are selectable for distances up to 2km or 10km, and industrial-grade operating temperature ranges are available.

    The post 25G SFP28 DWDM EML 100GHz 2km/10km SMF LC Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver module in SFP28 hot-pluggable form factor
  • Single channel DWDM (C-band 100GHz C18-C61 44 wavelengths selectable) EML and PIN/APD
  • Supports transmission rates up to 25.78125Gbps
  • Compliant with SFP28 MSA and 25G Ethernet transmission protocols
  • Compliant with CPRI Option 10 and 25G eCPRI transport protocols
  • Use 1 pair of single-mode fiber for transmission over distances of up to 2km or 10km
  • Power consumption less than 2W
  • Dual LC optical connectors
  • Commercial and industrial grade operating temperature ranges available
  • Operates at a voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBC-D2531K10C 25GE/eCPRI SFP28 LR DML 1310nm 10km Optical Transceiver Module
    FBC-D2531K10T Industrial Grade 25GE/eCPRI SFP28 LR DML 1310nm 10km Optical Transceiver Module

    The post 25G SFP28 DWDM EML 100GHz 2km/10km SMF LC Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/25g-sfp28-dwdm.html/feed 0     25G SFP28 LR DML 1310nm 10km SMF LC Optical Transceiver (Industrial Grade Optional) https://www.fiberstamp.com/25g-sfp28-lr.html https://www.fiberstamp.com/25g-sfp28-lr.html#respond Wed, 09 Aug 2023 07:44:19 +0000 https://www.fiberstamp.com/?post_type=product&p=9315 FIBERSTAMP 25G SFP28 LR optical transceiver modules are used for short-distance interconnections between equipment within data centers or for 5G pre-transmission, and are compliant with the IEEE 802.3by 25GBASE-SR Ethernet transport protocol, with an optional dual-rate version compatible with CPRI Option 10 and 25GE. The series uses 1 pair of multimode fiber optic transmission with a central wavelength of 850nm for distances up to 70m (OM3) or 100m (OM4), with an optional industrial grade operating temperature range.

    The post 25G SFP28 LR DML 1310nm 10km SMF LC Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>
  • Full-duplex transceiver module in SFP28 hot-pluggable form factor
  • Single channel 1310nm VCSEL and PIN
  • Compliant with SFP28 MSA and IEEE 802.3by 25GBASE-LR Ethernet transmission protocols
  • Supports transmission rates up to 25.78125Gbps
  • Compatible with CPRI Option 10 and 25G eCPRI transport protocols
  • Downward compatible with CPRI Option 8 transport protocols
  • Transmission over 1 pair of single-mode fiber up to 10km
  • Dual LC optical connectors
  • Commercial and industrial grade operating temperature ranges available
  • Operates at a voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBC-D2531K10C 25GE/eCPRI SFP28 LR DML 1310nm 10km Optical Transceiver Module
    FBC-D2531K10T Industrial Grade 25GE/eCPRI SFP28 LR DML 1310nm 10km Optical Transceiver Module

    The post 25G SFP28 LR DML 1310nm 10km SMF LC Optical Transceiver (Industrial Grade Optional) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/25g-sfp28-lr.html/feed 0