Pluggable Optical Modules - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 03 Jul 2026 09:16:59 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Pluggable Optical Modules - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp-dd-sr4.html https://www.fiberstamp.com/200g-qsfp-dd-sr4.html#respond Fri, 03 Jul 2026 08:45:20 +0000 https://www.fiberstamp.com/?post_type=product&p=15129 The FIBERSTAMP 200G QSFP DD SR4 is a Pluggable, Parallel, Fiber-Optic QSFP Double Density for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with KP-FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface 200GAUI-8(no FEC)1 uses a 76 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 4x53Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array
    • 4 channels PIN photo detector array
    • Internal 8:4 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Power consumption <7W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with KP-FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3bs 200GBASE-SR4

    • The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr4.html/feed 0     400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html#respond Mon, 22 Jun 2026 07:58:17 +0000 https://www.fiberstamp.com/?post_type=product&p=15005 The FIBERSTAMP 400G QSFP-DD PSM O-band DWDM4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 400G or 200G Ethernet Metro-Access over DWDM applications and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP-DD MSA and CMIS compliant
    • Compliantto 802.3bs 400GBASE-DR4
    • 125Gbit/s PAM4 electrical interface(400GAUI-8)
    • 25Gbps(53.125GBd PAM4)Optics architecture
    • Power consumption <11W
    • Maximum link length of 10km G.652 SMF with KP-FEC
    • Up to 30 km when equipped with an external SOA
    • MPO-12 receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE 802.3bs 400GBASE-DR4
    • Data center network

    The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html/feed 0     FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

    ]]>     Features
    • 8channels full-duplex transceiver modules
    • Supports8×25Gb/s aggregate bit rates
    • Supports8×10Gb/s aggregate bit rates if required
    • 8channels 1310nm DFB
    • 8channels PIN photo detector array
    • Internal CDR circuits on both receiver and transmitter channels
    • Support CDR bypass
    • Low power consumption <6.5W
    • Hot Pluggable QSFP DD form factor
    • Up to 20km reach for 652 SMF
    • Single male MPO16(APC 8-degree) connector receptacle
    • Operating case temperature 0°C to +70°C
    • 3Vpower supply voltage
    • RoHS compliant (lead free)

    Applications

      • 2×100GEthernet links
      • Infiniband DDR/EDR
      • Datacenter and Enterprise networking

    The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0     10G SFP+ BiDi 10～80km Single-fiber Bidirectional Transceiver Module (Industrial-Grade Option Available) https://www.fiberstamp.com/10g-sfp-bidi-10-80km.html https://www.fiberstamp.com/10g-sfp-bidi-10-80km.html#respond Wed, 28 Jan 2026 05:45:43 +0000 https://www.fiberstamp.com/?post_type=product&p=14591 FIBERSTAMP’s 10G BiDi SFP+ optical transceiver series is widely deployed in 10G Ethernet and Optical Transport Network (OTN OTU2e) applications. The modules are fully compatible with 10G CPRI, SONET OC-192 / SDH STM-64, and 10G Fibre Channel standards. Designed for single-fiber transmission over single-mode fiber, they support reach options from 10 km up to 80 km, enabling efficient fiber utilization and flexible network deployment.

    The post 10G SFP+ BiDi 10～80km Single-fiber Bidirectional Transceiver Module (Industrial-Grade Option Available) first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable SFP+ form factor
  • Full-duplex optical transceiver module
  • Compliant with SFP+ MSA and 10G Ethernet standards
  • Data rates up to 10.3 Gbps
  • DFB laser transmitter with PIN/APD receiver
  • Single-fiber transmission over single-mode fiber, supporting distances from 10 km to 80 km
  • Simplex LC optical connector
  • Integrated Digital Diagnostic Monitoring (DDM)
  • Commercial operating temperature range: 0°C to 70°C
  • Industrial-grade operating temperature range: –40°C to +85°C (Part Numbers Ending with “T”)
  • 3.3 V power supply
  • RoHS compliant (lead-free)
    • P/N Description
    FCB-E102733K10CT 10GE BiDi SFP+, 1270nm Tx DFB 1330nm-Rx PIN, 1330nm-Tx DFB 1270nm-Rx PI, 10km, SMF, Single LC, 1.5W
    FCB-E103327K10CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx PIN, 10km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E102733K20CT 10GE BiDi SFP+, 1270nm-Tx DFB 1330nm-Rx PIN, 20km, SMF, Single LC, 1.5W
    FCB-E103327K20CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx PIN, 20km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E102733K40CT 10GE BiDi SFP+, 1270nm-Tx DFB 1330nm-Rx PIN, 40km, SMF, Single LC, 1.5W
    FCB-E103327K40CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx PIN, 40km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E102733K60CT 10GE/CPRI BiDi SFP+, 1270nm-Tx DFB 1330nm-Rx APD, 60km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E103327K60CT 10GE/CPRI BiDi SFP+, 1330nm-Tx DFB 1270nm-Rx APD, 60km, SMF, Single LC, Industrial Grade, 1.2W
    FCB-E104955K80C 10GE/OTN BiDi SFP+, 1490nm-Tx 1550nm-Rx, 80km, SMF, Single LC
    FCB-E105549K80C 10GE/OTN BiDi SFP+, 1550nm-Tx 1490nm-Rx, 80km, SMF, Single LC

    The post 10G SFP+ BiDi 10～80km Single-fiber Bidirectional Transceiver Module (Industrial-Grade Option Available) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/10g-sfp-bidi-10-80km.html/feed 0     100G QSFP28 SWDM4 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-swdm4.html https://www.fiberstamp.com/100g-qsfp28-swdm4.html#respond Thu, 22 Jan 2026 08:00:10 +0000 https://www.fiberstamp.com/?post_type=product&p=14380 The FIBERSTAMP 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multi-mode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions  are available via an I2C interface, as specified by the QSFP28 MSA.

    The post 100G QSFP28 SWDM4 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Feature

    • Compliant with QSFP28 MSA
    • Compliant with SWDM MSA
    • Compliant with IEEE802.3bm CAUI-4
    • Hot-pluggable QSFP28 form factor
    • 4x25Gb/s 850mm VCSEL-based transmitter
    • Supports 103.1Gbps aggregate bit rate
    • Power dissipation<3.5W
    • Maximum link length of 150m on OM5 multimode Fiber
    • Case temperature range of 0°C to 70°C
    • Duplex LC receptacles
    • CAUI-4 electrical interface
    • RoHS compliant

     

    Applications

    • 100G Ethernet over Duplex MMF

    The post 100G QSFP28 SWDM4 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-swdm4.html/feed 0     FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr2.html https://www.fiberstamp.com/100g-qsfp28-sr2.html#respond Mon, 01 Dec 2025 09:49:17 +0000 https://www.fiberstamp.com/?post_type=product&p=14163 The FIBERSTAMP 100G SR2 QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE 802.3cd and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

    The module incorporates 2 channels 850nm VCSEL Array and PIN photo detector array. This results in an aggregate bandwidth of 100Gbps into a MPO cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

    The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP28 module form factor
    • Support QSFP28 SFF-8436/8636
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 2 channels 850nm VCSEL Array and PIN photo detector array
    • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Single MPO12/APCreceptacle(Only use channel 1 and channel 2)
    • Maximum link length of 100m OM4,70m OM3(DSP KP4-FEC is ON)
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • Low power consumption < 4W
    • RoHS compliant (lead free)

     

    Applications

      • 100G SR2（2x 50G PAM4）applications
      • High-speed interconnects within and between switches, routers and transport equipment
      • Server-server clusters, super-computing interconnections
      • Proprietary backplanes
      • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
    P/N Description
    FEG-100S2M10C 100GE QSFP28 SR2 Optical Transceiver

    The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-sr2.html/feed 0     FIBERSTAMP 100G SFP112 SR1 Optical Transceiver https://www.fiberstamp.com/100g-sfp112-sr1.html https://www.fiberstamp.com/100g-sfp112-sr1.html#respond Wed, 29 Oct 2025 10:00:51 +0000 https://www.fiberstamp.com/?post_type=product&p=13865 The FIBERSTAMP Technologies 100G SFP112 SR1 is a single-Channel, Pluggable, Fiber-Optic SFP112 for 53.125GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

    • Full-duplex transceiver modules
    • 53.125GBdPAM4 transmitter and PAM4 receiver
    • 850nm VCSEL and PIN receiver
    • Internal DSPon both receiver and transmitter channels
    • Power consumption <2.1W
    • Hot Pluggable SFP112form factor
    • Compliant with SFF-DD MSA,CMIS
    • Up to 100m transmission distance on OM4/OM5 MMF with FEC
    • DuplexLC/APC connector
    • Built-in digital diagnostic functions
    • Operating case temperature:0°C to +70°C
    • +3V power supply
    • RoHS 6 compliant(lead free)

     

    Applications

      • IEEE 802.3db100GBASE-SR1

    The post FIBERSTAMP 100G SFP112 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-sfp112-sr1.html/feed 0     FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module https://www.fiberstamp.com/400g-qsfpdd-er8.html https://www.fiberstamp.com/400g-qsfpdd-er8.html#respond Thu, 18 Sep 2025 09:24:25 +0000 https://www.fiberstamp.com/?post_type=product&p=13829 FIBERSTAMP's 400G QSFP-DD ER8 module is designed for 40 km optical communication applications, and it is compliant to IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

    The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP-DD MSA compliant
    • Compliant to IEEE 802.3bs 400GBASE-ER8
    • Digital diagnostic monitoring support
    • Hot pluggable 76 pin electrical interface
    • 8 LAN-WDM lanes MUX/DEMUX design
    • 53.125 Gbps PAM4 Channel Electrical Serial
    • Interface (400GAUI-8)
    • Maximum power consumption 15.4 W
    • LC duplex connector
    • Supports 425 Gb ps bit rate
    • Up to 40 km transmission on single mode fiber
    • Operating case temperature: 0 。C to 70 。C
    • Single 3.3 V power supply
    • RoHS 2 compliant

    Applications

    • 400GBASE-ER8 Ethernet
    • Telecom networking
    • Data Center Interconnect

    The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfpdd-er8.html/feed 0     FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-er4.html https://www.fiberstamp.com/200g-qsfpdd-er4.html#respond Thu, 18 Sep 2025 09:17:56 +0000 https://www.fiberstamp.com/?post_type=product&p=13826 FIBERSTAMP’s 200GE QSFP-DD ER4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 40km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-ER4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDMcooled EML transmitter
    • 4 channels APD receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 40km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-ER4 Ethernet
    • Telecom networking
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-er4.html/feed 0     FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-lr4.html https://www.fiberstamp.com/200g-qsfpdd-lr4.html#respond Thu, 18 Sep 2025 08:16:01 +0000 https://www.fiberstamp.com/?post_type=product&p=13823 FIBERSTAMP’s 200G QSFP-DD LR4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 10km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-LR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDM cooled EML transmitter
    • 4 channels PIN photo detector array receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 10km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-LR4 Ethernet
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-lr4.html/feed 0