Active Optical Cables - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 12 Jun 2026 09:10:32 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Active Optical Cables - FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html#respond Mon, 30 Mar 2026 09:39:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14848 FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.

FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug QSFP56-DD and QSFP28form factor
  • QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
  • Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
  • 8x 50Gb/s PAM4 modulation
  • Low power dissipation <9W (400G End)
  • Low power dissipation <4.5W (100G End)
  • RoHS-6 compliant (lead-free)
  • Commercial case temperature range of 0°C to 70°C
  • Single 3.3V power supply
  • Maximum link length of 70m on OM3 MMF
    and 100m on OM4 & OM5 MMF
  • Uncooled 850nm VCSEL array (both End)
  • PIN photo detector array (both End)
  • 400GBASE-SR8 and 100GBASE-SR2 compliant
  • I2C management interface
  • CMIS V4.0 compliant

 

Applications

  • IEEE 802.3cd&nbsp100GBASE-SR2 Ethernet (PAM4)
  • IEEE 802.3cd&nbsp400GBASE-SR8 Ethernet (PAM4)

The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html/feed 0 2×12G-SDI Extender https://www.fiberstamp.com/2x12g-sdi-optical-extender.html https://www.fiberstamp.com/2x12g-sdi-optical-extender.html#respond Wed, 13 Dec 2023 07:47:05 +0000 https://www.fiberstamp.com/?post_type=product&p=10698 FIBERSTAMP 2-channel 12G-SDI optical extender boasts a transmission rate spanning 125Mbps to 11.88Gbps. It enables bidirectional transmission of two independent 12G-SDI video signals, covering distances of up to 20km. It also maintains backward compatibility with MADI, DVB-ASI, SD-SDI, HD-SDI, 3G-SDI, and 6G-SDI standards. GIGALIGHT’s 3G/6G/12G-SDI optical module empowers customers to expand one to two SDI signal channels seamlessly.

The post 2×12G-SDI Extender first appeared on FIBERSTAMP.

]]>
  • Input data rate  when SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI is detected
  • Automatically switch rates to 125Mbps, 270Mbps, 1.48Gbps, 3Gbps, 6Gbps and 12Gbps
  • With a maximum transmission distance of 80km for 3G-SDI and 20km for 12G-SDI.
  • Supported format :
    • SMPTE ST 2082-1 (11.88Gbps/s)
    • SMPTE ST 2081-1 (5.94Gbps/s)
    • SMPTE ST 424 (2.97Gbps/s)
    • SMPTE ST 292 (1.485Gbps/s)
    • SMPTE ST 259(360Mb/s)
    • DVB-ASI(270Mb/s)
    • MADI (125Mb/s)
    • Product Type Description
    FE2SP-2V12F 2×12G-SDI Optical Extender

    The post 2×12G-SDI Extender first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/2x12g-sdi-optical-extender.html/feed 0     4×12G-SDI CWDM Extender https://www.fiberstamp.com/4x12g-sdi-optical-extenders.html https://www.fiberstamp.com/4x12g-sdi-optical-extenders.html#respond Fri, 08 Dec 2023 07:52:53 +0000 https://www.fiberstamp.com/?post_type=product&p=10633 FIBERSTAMP 4x12G-SDI optical extender extends the range of 8K video transmission through optical fiber between SDI source and receiver equipment. Utilizing the 12G-SDI CWDM optical module, it extends the transmission distance up to 10km.

    The post 4×12G-SDI CWDM Extender first appeared on FIBERSTAMP.

    ]]>
  • Four 12G-SDI video signals can be extended by up to 10km through single-mode fiber
  • Each channel can achieve a rate of up to 12Gbps, and 4 lanes for a total of 48Gbps to support 8K video signal transmission
  • Complies with SMPTE-424M, 292M, 295M, 297M, 305M, 310M and DVB-ASI standards
  • Pluggable SFP ports and BNC interfaces are available for plug-n-play
  • Signals are transmitted through longer, thinner fiber optic cables without electromagnetic emissions (EMI) or radio frequency interference
  • Commercial-grade operating temperatures range from 0 to 60 degrees Celsius
  • The metal housing shields electromagnetic radiation (EMI).
  • RoHS compliant (lead-free)
  • P/N Description
    FE1FC-4V12R 4x12G-SDI(Transmitter) Optical Extender
    FE1FC-4V12T 4x12G-SDI(Receiver) Optical Extender

    The post 4×12G-SDI CWDM Extender first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/4x12g-sdi-optical-extenders.html/feed 0     800G OSFP112 Active Optical Cables 8x100G PAM4, 100Meters(328ft) https://www.fiberstamp.com/800g-osfp-aoc.html https://www.fiberstamp.com/800g-osfp-aoc.html#respond Mon, 14 Aug 2023 03:38:36 +0000 https://www.fiberstamp.com/?post_type=product&p=9463 FIBERSTAMP 800G OSFP AOC active optical cable is used for short-distance interconnections between equipment within data centers and are compliant with the IEEE 802.3cm transport protocol, transport protocols. The series uses 8 parallel pairs of multimode fiber for transmission over distances up to 70m (OM3) or 100m (OM4/OM5).

    The post 800G OSFP112 Active Optical Cables 8x100G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable OSFP active optical cable assemblies
  • 8x 100G PAM4 electrical interface
  • 8x 100G PAM4 optical interface
  • Data rate up to 106.25Gbps per channel
  • Compliant with OSFP MSA, CMIS and IEEE 802.3
  • Low power dissipation
  • Commercial case operating temperature range
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)
    • P/N Description
    FYV-800MxxxC 800G OSFP AOC

    The post 800G OSFP112 Active Optical Cables 8x100G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-osfp-aoc.html/feed 0     800G QSFP-DD Active Optical Cables 8x100G PAM4, 100Meters(328ft) https://www.fiberstamp.com/800g-qsfp-dd-aoc.html https://www.fiberstamp.com/800g-qsfp-dd-aoc.html#respond Mon, 14 Aug 2023 03:33:03 +0000 https://www.fiberstamp.com/?post_type=product&p=9462 FIBERSTAMP 800G QSFP112-DD AOC active optical cable is used for short-distance interconnections between equipment within data centers and are compliant with the IEEE 802.3cm 800GBASE-SR8 transport protocol. The series uses 8 parallel pairs of multimode fiber for transmission over distances up to 70m (OM3) or 100m (OM4/OM5).

    The post 800G QSFP-DD Active Optical Cables 8x100G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable QSFP-DD active optical cable assemblies
  • 8x 100G PAM4 electrical interface
  • 8x 100G PAM4 optical interface
  • Data rate up to 106.25Gbps per channel
  • Compliant with QSFP-DD MSA, CMIS and IEEE 802.3
  • Low power dissipation
  • Commercial case operating temperature range
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)
    • P/N Description
    FYJ-800MxxxC 800G QSFP112-DD AOC

    The post 800G QSFP-DD Active Optical Cables 8x100G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-qsfp-dd-aoc.html/feed 0     40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html#respond Mon, 14 Aug 2023 03:00:48 +0000 https://www.fiberstamp.com/?post_type=product&p=9459 FIBERSTAMP 40G QSFP+ AOC active optical cable is used for short-distance branch interconnection between internal devices in the data center. It complies with IEEE 802.3ba 40GBASE-SR4 transmission protocol, and is also compatible with IEEE 802.3ae 10GBASE-SR and InfiniBand QDR transmission protocols. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3).

    The post 40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating one 40G QSFP+ SR4 and four 10G SFP+ SR optical transceiver modules at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate of each channel can reach up to 10.3125Gbps
  • Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 transmission protocol
  • Compatible with IEEE 802.3ae 10GBASE-SR and InfiniBand QDR transport protocols
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 100m (OM3)
  • Power consumption is less than 1.5W (per 40G QSFP+ SR4 optical module) or 1W (per
  • 10G SFP+ SR optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF4B-E40MxxxC 40G QSFP+ to 4x 10G SFP+ AOC

    The post 40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html/feed 0     400G QSFP112 Active Optical Cables, 4x100G PAM4, 100 Meters(328ft) https://www.fiberstamp.com/400g-qsfp112-aoc.html https://www.fiberstamp.com/400g-qsfp112-aoc.html#respond Mon, 14 Aug 2023 02:19:20 +0000 https://www.fiberstamp.com/?post_type=product&p=9454 FIBERSTAMP GIGALIGHT's 400G QSFP112 AOC is a hot-pluggable active optical cable designed for 400G Ethernet links in data centers. With 100G PAM4 and VCSEL technology, it can interconnect up to 425Gbps of data within 100m with FEC turned on in the system.

    The post 400G QSFP112 Active Optical Cables, 4x100G PAM4, 100 Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable QSFP-DD active optical cable assemblies
  • 4x 100G PAM4 electrical interface
  • 4x 100G PAM4 optical interface
  • Data rate up to 106.25Gbps per channel
  • Compliant with QSFP112 MSA, CMIS and IEEE 802.3
  • Low power dissipation
  • Commercial case operating temperature range
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)

    • The post 400G QSFP112 Active Optical Cables, 4x100G PAM4, 100 Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-aoc.html/feed 0     100G QSFP28 To 4x 25G SFP28 Active Optical Cables 4x25G NRZ, 100Meters(328ft) https://www.fiberstamp.com/100g-qsfp28-4x-25g-sfp28-aoc.html https://www.fiberstamp.com/100g-qsfp28-4x-25g-sfp28-aoc.html#respond Mon, 14 Aug 2023 02:16:08 +0000 https://www.fiberstamp.com/?post_type=product&p=9452 FIBERSTAMP 100G QSFP28 to 4x 25G SFP28 AOC active optical cable is used for short-distance interconnection between devices within the data center, conforming to IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol and IEEE 802.3by 25GBASE-SR Ethernet transmission protocol. This series uses 4 pairs of parallel multimode fiber transmission with a center wavelength of 850nm and distances of up to 70m (OM3) or 100m (OM4).

    The post 100G QSFP28 To 4x 25G SFP28 Active Optical Cables 4x25G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating one 100G QSFP28 SR4 and four 25G SFP28 SR optical transceiver modules at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 25.78125Gbps
  • Receive and transmit channel built-in CDR circuit, support CDR bypass
  • Comply with QSFP28/SFP28 MSA and IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol
  • Compatible with IEEE 802.3by 25GBASE-SR Ethernet transmission protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m (OM4)
  • Power consumption less than 2W (100G QSFP28 SR4 module) or 1W (each 25G SFP28 SR module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYG4C-100MxxxTH 100G QSFP28 to 4x 25G SFP28 AOC

    The post 100G QSFP28 To 4x 25G SFP28 Active Optical Cables 4x25G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-4x-25g-sfp28-aoc.html/feed 0     128GFC QSFP28 Active Optical Cables 4x28G NRZ, Enhanced, 300Meters(984ft) https://www.fiberstamp.com/128gfc-qsfp28-eaoc.html https://www.fiberstamp.com/128gfc-qsfp28-eaoc.html#respond Mon, 14 Aug 2023 01:59:32 +0000 https://www.fiberstamp.com/?post_type=product&p=9449 FIBERSTAMP 128GFC QSFP28 AOC enhanced active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with 128GFC/4x32GFC fiber channel transmission protocol and is compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, the center wavelength is 850nm, and the distance can reach up to 200m (OM3) or 300m (OM4).

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, Enhanced, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly with a 128GFC QSFP28 SR4 optical transceiver module integrated at each end
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • An active optical cable assembly with a 128GFC QSFP28 eSR4 optical transceiver module integrated at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 28.05Gbps
  • Receive and transmit channel built-in CDR circuit, support CDR bypass
  • Compliant with QSFP28 MSA and 128GFC/4x32GFC fiber channel transmission protocol
  • Compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, when FEC is not turned on, the distance can reach up to 70m (OM3) or 100m (OM4)
  • When FEC is turned on, the distance can reach up to 200m (OM3) or 300m (OM4)
  • Power consumption less than 2W (per 128GFC QSFP28 eSR4 module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYG-E112MxxxC 128GFC QSFP28 AOC(Enhanced)

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, Enhanced, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/128gfc-qsfp28-eaoc.html/feed 0     128GFC QSFP28 Active Optical Cables 4x28G NRZ, 100Meters(328ft) https://www.fiberstamp.com/128gfc-qsfp28-aoc-100m.html https://www.fiberstamp.com/128gfc-qsfp28-aoc-100m.html#respond Mon, 14 Aug 2023 01:52:48 +0000 https://www.fiberstamp.com/?post_type=product&p=9448 FIBERSTAMP 128GFC QSFP28 AOC  active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with 128GFC/4x32GFC fiber channel transmission protocol and is compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, the center wavelength is 850nm, and the distance can reach up to 70m (OM3) or 100m (OM4).

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly with a 128GFC QSFP28 SR4 optical transceiver module integrated at each end
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 28.05Gbps
  • Receive and transmit channel built-in CDR circuit, support CDR bypass
  • Compliant with QSFP28 MSA and 128GFC/4x32GFC fiber channel transmission protocol
  • Compatible with IEEE 802.3bm 100GBASE-SR4 Ethernet transmission protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m (OM4)
  • Power consumption less than 2W (per 128GFC QSFP28 SR4 module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYG-112MxxxC 128GFC QSFP28 AOC

    The post 128GFC QSFP28 Active Optical Cables 4x28G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/128gfc-qsfp28-aoc-100m.html/feed 0