SMF - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 22 Jul 2026 09:25:16 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.2 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png SMF - FIBERSTAMP https://www.fiberstamp.com 32 32 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html#respond Wed, 22 Jul 2026 09:03:26 +0000 https://www.fiberstamp.com/?post_type=product&p=15264 FIBERSTAMP 200G QSFP DD PSM8 20km Optical Transceiver is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16/ 24 fiber MTP (MPO) connector. This module incorporates FIBERSTAMP Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> Features

  • 8 channels full-duplex transceiver modules
  • Supports 8×25Gb/s aggregate bit rates
  • Supports 8×10Gb/s aggregate bit rates if required
  • 8 channels 1310nm DFB
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for G.652 SMF
  • Single male MPO16/MPO24(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100G Ethernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

 

P/N & Data Sheet Description
FEL-200P8K02C16 200GE QSFP-DD PSM8 DML 1310nm 20km MPO16 Optical Modules
FEL-200P8K10C24 200GE QSFP-DD PSM8 DML 1310nm 20km MPO24 Optical Modules

The post 200G QSFP DD PSM8 20km Optical Transceiver MPO24 / MPO16 first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-psm8-20km.html/feed 0 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html#respond Mon, 22 Jun 2026 07:58:17 +0000 https://www.fiberstamp.com/?post_type=product&p=15005 The FIBERSTAMP 400G QSFP-DD PSM O-band DWDM4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 400G or 200G Ethernet Metro-Access over DWDM applications and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA and CMIS compliant
  • Compliantto 802.3bs 400GBASE-DR4
  • 125Gbit/s PAM4 electrical interface(400GAUI-8)
  • 25Gbps(53.125GBd PAM4)Optics architecture
  • Power consumption <11W
  • Maximum link length of 10km G.652 SMF with KP-FEC
  • Up to 30 km when equipped with an external SOA
  • MPO-12 receptacles
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3bs 400GBASE-DR4
  • Data center network

The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html/feed 0 FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> Features
  • 8channels full-duplex transceiver modules
  • Supports8×25Gb/s aggregate bit rates
  • Supports8×10Gb/s aggregate bit rates if required
  • 8channels 1310nm DFB
  • 8channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Support CDR bypass
  • Low power consumption <6.5W
  • Hot Pluggable QSFP DD form factor
  • Up to 20km reach for 652 SMF
  • Single male MPO16(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3Vpower supply voltage
  • RoHS compliant (lead free)

Applications

    • 2×100GEthernet links
    • Infiniband DDR/EDR
    • Datacenter and Enterprise networking

The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0 FIBERSTAMP 400G QSFP112 FR4 2Km EML Transceiver Module https://www.fiberstamp.com/400g-qsfp112-fr4.html https://www.fiberstamp.com/400g-qsfp112-fr4.html#respond Tue, 29 Jul 2025 09:34:23 +0000 https://www.fiberstamp.com/?post_type=product&p=13660 This FIBERSTAMP 400G QSFP112 FR4 product is designed for 2km optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 4 channels of 100Gb/s (PAM4) electrical output data.

The module incorporates 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength, operating at 100G per channel. The transmitter path incorporates 4 independent EML drivers and EML lasers together with an optical multiplexer. On the receiver path, an optical de- multiplexer is coupled to a 4-channel photodiode array.

It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

The post FIBERSTAMP 400G QSFP112 FR4 2Km EML Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • 4 channels full-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Hot Pluggable QSFP112 form factor and Compliant with CMIS
  • Compliantto 400G-FR4 Technical Specification
  • Power consumption <10W
  • Maximum link length of 2Km G.652 SMF with KP-FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE802.3cu-2021
  • 400G-FR4 Technical Spec D2p0
  • CEI-112G-VSR-PAM4
  • QSFP112 MSA
  • Data center network
P/N & Data Sheet Description
FBJ-400C4K02C 400G QSFP112 FR4 2Km EML Transceiver Module

The post FIBERSTAMP 400G QSFP112 FR4 2Km EML Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp112-fr4.html/feed 0 FIBERSTAMP 400G QSFP112 LR4 10Km EML Transceiver Module https://www.fiberstamp.com/400g-qsfp112-lr4.html https://www.fiberstamp.com/400g-qsfp112-lr4.html#respond Tue, 29 Jul 2025 09:10:33 +0000 https://www.fiberstamp.com/?post_type=product&p=13658 This FIBERSTAMP FBJ-400C4K10C product is designed for 10km optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 4 channels of 100Gb/s (PAM4) electrical output data.

The module incorporates 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength, operating at 100G per channel. The transmitter path incorporates 4 independent EML drivers and EML lasers together with an optical multiplexer. On the receiver path, an optical de- multiplexer is coupled to a 4-channel photodiode array.

It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

The post FIBERSTAMP 400G QSFP112 LR4 10Km EML Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • 4 channels full-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Hot Pluggable QSFP112 form factor and Compliant with CMIS
  • Compliant to 400G-LR4 Technical Specification
  • Power consumption <10W
  • Maximum link length of 10Km G.652 SMF with KP-FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • 400G-LR4 Technical Spec D2p0
  • CEI-112G-VSR-PAM4
  • QSFP112 MSA
  • Data center network
P/N & Data Sheet Description
FBJ-400C4K10C 400G QSFP112 LR4 10Km EML Transceiver Module

The post FIBERSTAMP 400G QSFP112 LR4 10Km EML Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfp112-lr4.html/feed 0 SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-osfp-dr4-siph.html https://www.fiberstamp.com/400g-osfp-dr4-siph.html#respond Tue, 22 Jul 2025 08:47:00 +0000 https://www.fiberstamp.com/?post_type=product&p=13636 FIBERSTAMP FUR-400P4M50C is a high-performance transceiver module designed for 500-meter optical communication applications. It is fully compliant with OSFP MSA and the IEEE 802.3bs standard.

This silicon photonics (SiPh) transceiver is built on a state-of-the-art SiPh platform, incorporating both active and passive optoelectronic components. It utilizes advanced 3D packaging technology and industry-leading 7nm DSP chips, delivering a cost-effective, low-power solution for 400GBASE data center applications.

Engineered for reliability, the module is designed to perform in harsh operating environments, withstanding variations in temperature, humidity, and EMI interference. It provides high functionality and integration, with easy management and control via a two-wire serial interface.

The post SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> Features
▪ OSFP MSA and CMIS compliant ▪ Compliant to 802.3bs
▪ 4×106.25Gbps(53.125GBd PAM4)electrical interface
▪ 4×106.25Gbps(53.125GBd PAM4)optics architecture
▪ Power consumption <10W
▪ Maximum link length of 500m G.652 SMF with KP-FEC
▪ MPO-12 receptacles
▪ Built-in digital diagnostic functions
▪ Operating case temperature 0°C to +70°C
▪ 3.3V power supply voltage
▪ RoHS compliant(lead free)

Applications
▪ Ethernet and Telecom
▪ Infiniband

 

P/N & Data Sheet Description
FUR-400P4M50C 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module

The post SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-osfp-dr4-siph.html/feed 0 800G QSFP-DD FR8 Duplex LC EML CWDM 2km Transceiver Module https://www.fiberstamp.com/800g-qsfp-dd-fr8.html https://www.fiberstamp.com/800g-qsfp-dd-fr8.html#respond Mon, 10 Mar 2025 02:29:52 +0000 https://www.fiberstamp.com/?post_type=product&p=13054 The FIBERSTAMP 800G QSFPDD FR8 is a high-speed transceiver module for 2km optical communication. It supports 8 channels at 106.25Gbps each, using CWDM EML lasers and PAM4 technology. The receiver includes 8 photodiodes and two 4-channel TIA arrays. It is compliant with QSFPDD MSA and IEEE 802.3, designed for harsh environments, and features a two-wire serial interface for control.

The post 800G QSFP-DD FR8 Duplex LC EML CWDM 2km Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFPDD MSA and CMIS compliant
  • 8×106.25Gbps(53.125GBd PAM4) electrical interface
  • 8×106.25Gbps(53.125GBd PAM4) optics architecture
  • EML CWDM transmitter
  • PIN and TIA array on the receiver side
  • Power consumption <16W
  • Maximum link length of 2km G.652 SMF with KP-FEC
  • Duplex LC connector
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3.3V power supply voltage
  • RoHS compliant (lead free)

Applications

  • 8x100G Ethernet
  • 1x800G Ethernet
  • Data center network

 

P/N Description
FBL-800C8K02C 800G QSFP-DD FR8 EML CWDM 2km Optical Transceiver Module

The post 800G QSFP-DD FR8 Duplex LC EML CWDM 2km Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-qsfp-dd-fr8.html/feed 0 400G QSFP-DD FR4 EML CWDM4 2km SMF LC Optical Transceiver https://www.fiberstamp.com/400g-qsfp-dd-fr4.html https://www.fiberstamp.com/400g-qsfp-dd-fr4.html#respond Tue, 19 Dec 2023 02:49:30 +0000 https://www.fiberstamp.com/?post_type=product&p=10828 FIBERSTAMP 400G QSFP-DD FR4 optical transceiver module adopts single-wavelength 100G PAM4 and silicon photonics integration technology, which is widely used in 400GBASE-FR4 Ethernet links, and the transmission distance can reach up to 2km.

The post 400G QSFP-DD FR4 EML CWDM4 2km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Full-duplex transceiver integrated module in QSFP-DD hot-pluggable package
  • 4-channel CWDM EML and PIN
  • The transmission rate per channel can reach up to 106.25Gbps (100G PAM4)
  • Compliant with QSFP-DD MSA and IEEE 802.3cu 400GBASE-LR4-6 and 100G
  • Lambda MSA 400G-LR4-10 standards
  • Utilizes a single pair of single-mode optical fibers, supporting distances of up to 2km
  • Power consumption is less than 10W
  • Dual LC optical port
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N & Data Sheet Description
    FBL-400C4K02C 400G QSFP-DD FR4 Optical Module

    The post 400G QSFP-DD FR4 EML CWDM4 2km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-fr4.html/feed 0     200G QSFP-DD 2×CWDM4 2km SMF Dual Duplex LC Optical Transceiver https://www.fiberstamp.com/200g-qsfp-dd-2cwdm4.html https://www.fiberstamp.com/200g-qsfp-dd-2cwdm4.html#respond Tue, 31 Oct 2023 09:17:58 +0000 https://www.fiberstamp.com/?post_type=product&p=9815 FIBERSTAMP 200G QSFP-DD 2×CWDM4 optical transceiver module is designed for medium-distance interconnect in data centers, compliant with the IEEE 802.3cn 200GBASE-2xCWDM4 Ethernet transmission protocol, supporting link transmission of up to 2km.

    The post 200G QSFP-DD 2×CWDM4 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8 channels full-duplex transceiver modules
  • 8 channels DFB with 2xCWDM4 wavelength
  • 8 channels PIN photo detector
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <6.5W
  • Hot-pluggable QSFP-DD form factor
  • Single-mode fiber transmission distance of up to 2km
  • Dual Duplex LC optical ports
  • Operating temperature range: 0℃ to +70℃
  • Power supply voltage: 3.3V
  • Compliant with RoHS standard (lead-free)
    • Product Model Product Description
    FBL-200CLxK02C 200GE QSFP-DD 2×CWDM4 2km optical transceiver module with DSP

    The post 200G QSFP-DD 2×CWDM4 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-2cwdm4.html/feed 0     400G QSFP-DD 2×FR4 DML 2km SMF Dual Duplex LC Optical Transceiver https://www.fiberstamp.com/400g-qsfp-dd-2fr4.html https://www.fiberstamp.com/400g-qsfp-dd-2fr4.html#respond Tue, 31 Oct 2023 09:07:52 +0000 https://www.fiberstamp.com/?post_type=product&p=9813 FIBERSTAMP 400G QSFP-DD 2×FR4 optical transceiver module is designed for medium-distance interconnect in data centers, compliant with the IEEE 802.3cn 400GBASE-2xFR4 Ethernet transmission protocol, supporting link transmission of up to 2km.

    The post 400G QSFP-DD 2×FR4 DML 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8×53.125Gbps PAM4 400GAUI-8 electrical interface
  • 8-channel DML-based transmitter (2xFR4)
  • Power consumption <9W
  • Hot-pluggable QSFP-DD form factor
  • Single-mode fiber transmission distance of up to 2km
  • Dual Duplex LC optical ports
  • Built-in digital diagnostic functions
  • I2C management interface
  • Compliant with CMIS 4.0
  • Operating temperature range: 0℃ to +70℃
  • Power supply voltage: 3.3V
  • Compliant with RoHS standard (lead-free)
    • Product Model Product Description
    FTL-400C4K02C 400GE QSFP-DD 2×FR4 DML 2km optical transceiver module with DSP

    The post 400G QSFP-DD 2×FR4 DML 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-2fr4.html/feed 0