Optical - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 18 Sep 2025 09:33:42 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Optical - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module https://www.fiberstamp.com/400g-qsfpdd-er8.html https://www.fiberstamp.com/400g-qsfpdd-er8.html#respond Thu, 18 Sep 2025 09:24:25 +0000 https://www.fiberstamp.com/?post_type=product&p=13829 FIBERSTAMP's 400G QSFP-DD ER8 module is designed for 40 km optical communication applications, and it is compliant to IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> Features

  • QSFP-DD MSA compliant
  • Compliant to IEEE 802.3bs 400GBASE-ER8
  • Digital diagnostic monitoring support
  • Hot pluggable 76 pin electrical interface
  • 8 LAN-WDM lanes MUX/DEMUX design
  • 53.125 Gbps PAM4 Channel Electrical Serial
  • Interface (400GAUI-8)
  • Maximum power consumption 15.4 W
  • LC duplex connector
  • Supports 425 Gb ps bit rate
  • Up to 40 km transmission on single mode fiber
  • Operating case temperature: 0 。C to 70 。C
  • Single 3.3 V power supply
  • RoHS 2 compliant

Applications

  • 400GBASE-ER8 Ethernet
  • Telecom networking
  • Data Center Interconnect

The post FIBERSTAMP 400G QSFP-DD ER8 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/400g-qsfpdd-er8.html/feed 0 FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-er4.html https://www.fiberstamp.com/200g-qsfpdd-er4.html#respond Thu, 18 Sep 2025 09:17:56 +0000 https://www.fiberstamp.com/?post_type=product&p=13826 FIBERSTAMP’s 200GE QSFP-DD ER4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 40km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-ER4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDMcooled EML transmitter
    • 4 channels APD receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 40km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-ER4 Ethernet
    • Telecom networking
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD ER4 40km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-er4.html/feed 0     FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module https://www.fiberstamp.com/200g-qsfpdd-lr4.html https://www.fiberstamp.com/200g-qsfpdd-lr4.html#respond Thu, 18 Sep 2025 08:16:01 +0000 https://www.fiberstamp.com/?post_type=product&p=13823 FIBERSTAMP’s 200G QSFP-DD LR4 Optical Transceiver modules are designed for using in 200Gigabit Ethernet 10km links over SMF single-mode fiber. They are compliant with the QSFP-DD MSA and with IEEE 802.3cn 200GBASE-LR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. These modules can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. And these modules incorporate FIBERSTAMP Technologies proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 LWDM optics architecture
    • 78125 or 26.5625GbpsElectrical Interface (200GAUI-8)
    • 4x53Gbps PAM4 optical transmitter and receiver
    • 4 channels LWDM cooled EML transmitter
    • 4 channels PIN photo detector array receiver
    • Internal 8:4 Gearbox DSP with KP FEC (optional)
    • Power consumption <9W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS 4.0
    • Up to 10km transmission over G.652 SMF
    • Duplex LC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature from 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant (lead free)

     

    Applications

    • 200GBASE-LR4 Ethernet
    • Datacenter

    • The post FIBERSTAMP 200G QSFP-DD LR4 LWDM 10km Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfpdd-lr4.html/feed 0