Data Center - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 29 Jul 2026 08:43:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.3 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Data Center - FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2#respond Wed, 29 Jul 2026 07:54:15 +0000 https://www.fiberstamp.com/?post_type=product&p=15292 FIBERSTAMP immersion 400G QSFP-DD SR8 is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with FEC, the optical interface is pluggable MPO16 pigtail.

It’s suitable for immersion environment, the internal optics are covered and protected with special technique to prevent cooling liquid leakage.

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 8x53Gbps PAM4 transmitter and PAM4 receiver
  • 8 channels 850nm VCSEL array
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <8.5W
  • Hot Pluggable QSFP DD form factor and Compliant with CMIS
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 pigtail
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3cd 200GBASE-SR4
  • Especially design for liquid immersion environment

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2/feed 0 Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html#respond Thu, 23 Jul 2026 10:24:54 +0000 https://www.fiberstamp.com/?post_type=product&p=15273 FIBERSTAMP 800G QSFP-DD AOC is Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. Both ends of this product are 800G QSFP-DD liquid immersion transceivers , internal optics are covered and protected with special technique to prevent cooling liquid leakage, the both side optical interface is MPO16 and pluggable with MPO16 optical jumper.

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Power consumption <14W per end
  • Hot Pluggable QSFPDD form factor and Compliant with CMIS
  • Maximum link length 100m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)
  • Especially design for liquid immersion environment
  • Pluggable MPO16 optical jumper

 

Applications

  • IEEE 802.3db&nbsp2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html/feed 0 Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2#respond Thu, 23 Jul 2026 10:14:07 +0000 https://www.fiberstamp.com/?post_type=product&p=15270 FIBERSTAMP immersion 800G QSFP-DD SR8 Optical Transceiver Module is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications in liquid immersion environment. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses pluggable MPO16 pigtail. The Common Management Interface Specification (CMIS) for QSFP-DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <13.5W
  • Hot Pluggable QSFP-DD form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 APC pigtail with customized length
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS  compliant(lead free)
  • Pluggable MPO16 pigtail

 

Applications

  • IEEE 802.3db 2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2/feed 0 Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersion-800g-osfp-dr8.html https://www.fiberstamp.com/immersion-800g-osfp-dr8.html#respond Fri, 15 Aug 2025 06:50:24 +0000 https://www.fiberstamp.com/?post_type=product&p=13748 The FIBERSTAMP 800G OSFP DR8 is a transceiver module designed for optical communication applications of up to 500 m in liquid immersion environments. It is built on two core technological pillars—advanced silicon photonics chips and a state-of-the-art 5 nm DSP—working in synergy to deliver exceptional performance, efficiency, and integration.

Specifically engineered for liquid immersion, the module’s housing is sealed with a protective coating to prevent coolant ingress into the optical engine. Compared with other liquid-immersion optical solutions, this design incorporates a dedicated pressure test point for leakage detection, giving the sealing and testing process a unique advantage in manufacturing quality assurance.

Built to withstand the most demanding operating conditions, the module resists extreme temperatures, high humidity, and EMI interference. It also offers extensive functionality and feature integration, all accessible via a two-wire serial interface.

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • OSFP MSA and CMIS compliant
  • 25Gbps (53.125GBd PAM4) electrical interface
  • 25Gbps (53.125GBd PAM4) optics architecture
  • Power consumption <15W
  • Up to 500m G.652 SMF with KP-FEC
  • Support pluggable dual MPO-12 pigtails
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 800GBASE-DR8
    • AI/ML Application
    • Data center network
    • Especially design for liquid immersion environment

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersion-800g-osfp-dr8.html/feed 0 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-vr2.html https://www.fiberstamp.com/200g-qsfp56-vr2.html#respond Thu, 19 Jun 2025 08:33:14 +0000 https://www.fiberstamp.com/?post_type=product&p=13602 The FIBERSTAMP 200G QSFP56 VR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)

    The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M03C 200GE QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Modules

    The post 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-vr2.html/feed 0     200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-sr2.html https://www.fiberstamp.com/200g-qsfp56-sr2.html#respond Thu, 19 Jun 2025 08:22:45 +0000 https://www.fiberstamp.com/?post_type=product&p=13600 The FIBERSTAMP 200G QSFP56 SR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M10C 200GE QSFP56 SR2 (4x53G PAM4 to 2x106G PAM4) 100m Optical Modules

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-sr2.html/feed 0     200G QSFP-DD 2×CWDM4 2km SMF Dual Duplex LC Optical Transceiver https://www.fiberstamp.com/200g-qsfp-dd-2cwdm4.html https://www.fiberstamp.com/200g-qsfp-dd-2cwdm4.html#respond Tue, 31 Oct 2023 09:17:58 +0000 https://www.fiberstamp.com/?post_type=product&p=9815 FIBERSTAMP 200G QSFP-DD 2×CWDM4 optical transceiver module is designed for medium-distance interconnect in data centers, compliant with the IEEE 802.3cn 200GBASE-2xCWDM4 Ethernet transmission protocol, supporting link transmission of up to 2km.

    The post 200G QSFP-DD 2×CWDM4 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8 channels full-duplex transceiver modules
  • 8 channels DFB with 2xCWDM4 wavelength
  • 8 channels PIN photo detector
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <6.5W
  • Hot-pluggable QSFP-DD form factor
  • Single-mode fiber transmission distance of up to 2km
  • Dual Duplex LC optical ports
  • Operating temperature range: 0℃ to +70℃
  • Power supply voltage: 3.3V
  • Compliant with RoHS standard (lead-free)
    • Product Model Product Description
    FBL-200CLxK02C 200GE QSFP-DD 2×CWDM4 2km optical transceiver module with DSP

    The post 200G QSFP-DD 2×CWDM4 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-2cwdm4.html/feed 0     400G QSFP-DD 2×FR4 DML 2km SMF Dual Duplex LC Optical Transceiver https://www.fiberstamp.com/400g-qsfp-dd-2fr4.html https://www.fiberstamp.com/400g-qsfp-dd-2fr4.html#respond Tue, 31 Oct 2023 09:07:52 +0000 https://www.fiberstamp.com/?post_type=product&p=9813 FIBERSTAMP 400G QSFP-DD 2×FR4 optical transceiver module is designed for medium-distance interconnect in data centers, compliant with the IEEE 802.3cn 400GBASE-2xFR4 Ethernet transmission protocol, supporting link transmission of up to 2km.

    The post 400G QSFP-DD 2×FR4 DML 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 8×53.125Gbps PAM4 400GAUI-8 electrical interface
  • 8-channel DML-based transmitter (2xFR4)
  • Power consumption <9W
  • Hot-pluggable QSFP-DD form factor
  • Single-mode fiber transmission distance of up to 2km
  • Dual Duplex LC optical ports
  • Built-in digital diagnostic functions
  • I2C management interface
  • Compliant with CMIS 4.0
  • Operating temperature range: 0℃ to +70℃
  • Power supply voltage: 3.3V
  • Compliant with RoHS standard (lead-free)
    • Product Model Product Description
    FTL-400C4K02C 400GE QSFP-DD 2×FR4 DML 2km optical transceiver module with DSP

    The post 400G QSFP-DD 2×FR4 DML 2km SMF Dual Duplex LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-2fr4.html/feed 0     Immersion 400G OSFP SR8 850nm 100m(328ft) Optical Transceivers https://www.fiberstamp.com/immersible-400g-osfp-sr8.html https://www.fiberstamp.com/immersible-400g-osfp-sr8.html#respond Thu, 17 Aug 2023 07:29:27 +0000 https://www.fiberstamp.com/?post_type=product&p=9537 FIBERSTAMP 400G OSFP SR8 liquid-cooled optical module is designed for immersive data center 400GBASE-SR8 Ethernet links. It utilizes 50G PAM4 and VCSEL technology and, with the FEC enabled, can achieve 400Gbps data interconnection over 8 pairs of multimode optical fibers within a distance up to 100 meters.

    The post Immersion 400G OSFP SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>
  • Utilizes hot-pluggable OSFP form factor
  • 8-channel full-duplex integrated transceiver module
  • Speed of up to 400Gbps
  • Compliant with OSFP MSA and IEEE 802.3cm 400GBASE-SR8 Ethernet standards
  • 8-channel 50Gb/s PAM4 850nm VCSEL transmitters and PIN receivers
  • Embedded DSP chips in both receive and transmit channels
  • With FEC enabled, can achieve a maximum transmission distance of up to 100m over multimode fibers
  • MPO pigtail fiber
  • Commercial-grade operating temperature range from 0 to 60 degrees Celsius
  • Power supply voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)

    • The post Immersion 400G OSFP SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-400g-osfp-sr8.html/feed 0     Immersion 400G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html#respond Thu, 17 Aug 2023 07:20:43 +0000 https://www.fiberstamp.com/?post_type=product&p=9536 FIBERSTAMP 400G QSFP-DD SR8 liquid-cooled optical module is designed for immersive data center 400GBASE-SR8 Ethernet links. It utilizes 50G PAM4 and VCSEL technology and, with the FEC enabled, can achieve 400Gbps data interconnection over 8 pairs of multimode optical fibers within a distance up to 100 meters.

    The post Immersion 400G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>
  • Utilizes hot-pluggable QSFP-DD form factor
  • 8-channel full-duplex integrated transceiver module
  • Speed of up to 400Gbps
  • Compliant with QSFP-DD MSA and IEEE 802.3cm 400GBASE-SR8 Ethernet standards
  • 8-channel 50Gb/s PAM4 850nm VCSEL transmitters and PIN receivers
  • Embedded DSP chips in both receive and transmit channels
  • With FEC enabled, can achieve a maximum transmission distance of up to 100m over multimode fibers
  • MPO pigtail fiber
  • Commercial-grade operating temperature range from 0 to 60 degrees Celsius
  • Power supply voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)

    • The post Immersion 400G QSFP-DD SR8 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html/feed 0