800g - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 23 Jul 2026 10:36:06 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png 800g - FIBERSTAMP https://www.fiberstamp.com 32 32 Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html#respond Thu, 23 Jul 2026 10:24:54 +0000 https://www.fiberstamp.com/?post_type=product&p=15273 FIBERSTAMP 800G QSFP-DD AOC is Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. Both ends of this product are 800G QSFP-DD liquid immersion transceivers , internal optics are covered and protected with special technique to prevent cooling liquid leakage, the both side optical interface is MPO16 and pluggable with MPO16 optical jumper.

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Power consumption <14W per end
  • Hot Pluggable QSFPDD form factor and Compliant with CMIS
  • Maximum link length 100m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)
  • Especially design for liquid immersion environment
  • Pluggable MPO16 optical jumper

 

Applications

  • IEEE 802.3db&nbsp2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html/feed 0 Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2#respond Thu, 23 Jul 2026 10:14:07 +0000 https://www.fiberstamp.com/?post_type=product&p=15270 FIBERSTAMP immersion 800G QSFP-DD SR8 Optical Transceiver Module is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications in liquid immersion environment. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses pluggable MPO16 pigtail. The Common Management Interface Specification (CMIS) for QSFP-DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <13.5W
  • Hot Pluggable QSFP-DD form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 APC pigtail with customized length
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS  compliant(lead free)
  • Pluggable MPO16 pigtail

 

Applications

  • IEEE 802.3db 2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2/feed 0 FIBERSTAMP 800G OSFP to RHS immersion cooling extender https://www.fiberstamp.com/800g-osfp-to-rhs-immersion-cooling-extender.html https://www.fiberstamp.com/800g-osfp-to-rhs-immersion-cooling-extender.html#respond Fri, 24 Apr 2026 09:58:30 +0000 https://www.fiberstamp.com/?post_type=product&p=14893 Description

FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP 800G OSFP to RHS immersion cooling extender (FSUE-RHS-801-DXX) is an important part of liquid immersion solution, this product include RHS extender cage, cable, OSFP contact three parts, the cable length can be customized no more than 0.3m, that can avoid the optical lens/engine/interface exposure to the liquid indirectly. In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins.

The post FIBERSTAMP 800G OSFP to RHS immersion cooling extender first appeared on FIBERSTAMP.

]]> Features

  • Compliant OSFP MSA
  • Typical insertion loss less 8dB@26.56GHz with 0.3m length
  • 100ohm differential impedance system
  • 3V power supply
  • I2C R/W function
  • Status indicators with LED
  • 3V/0.85W fan and heat sink for contact cooling
  • Low EMI radiation and crosstalk
  • RoHS compliant

Applications

  • Extend OSFP transceiver/AOC for liquid immersion link environment
  • OSFP to RHS extender and adapter
  • provide I2C R/W and some status indicators with LED

The post FIBERSTAMP 800G OSFP to RHS immersion cooling extender first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-to-rhs-immersion-cooling-extender.html/feed 0 FIBERSTAMP 800G OSFP immersion cooling extender https://www.fiberstamp.com/800g-osfp-immersion-cooling-extender.html https://www.fiberstamp.com/800g-osfp-immersion-cooling-extender.html#respond Mon, 01 Dec 2025 09:37:54 +0000 https://www.fiberstamp.com/?post_type=product&p=14161 Description

FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP 800G OSFP immersion cooling extender (FSOE-PC801-DXX) is an important part of liquid immersion solution, normal OSFP form transceiver/AOC can be used for immersion environment with this product. This product include extender cage, cable, OSFP housing three parts, the cable length can be customized no more than 0.3m for extension, that can avoid the optical lens/engine/interface exposure to the liquid indirectly.

In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins. When insertion and removal frequently, this product can effectively protect the OSFP SMT connector of switch/NIC.

The post FIBERSTAMP 800G OSFP immersion cooling extender first appeared on FIBERSTAMP.

]]> Features

  • Compliant OSFP MSA
  • Typical insertion loss less 8dB@26.56GHz with 0.3m length
  • 100ohm differential impedance system
  • 3V power supply
  • I2C R/W function
  • Status indicators with LED
  • 3V/0.85W fan and heat sink for contact cooling
  • Low EMI radiation and crosstalk
  • RoHS compliant(lead free)

Applications

    • Extend 800G OSFP transceiver/AOC for liquid immersion link environment
    • Protect device OSFP SMT connector
    • provide I2C R/W and some status indicators with LED

The post FIBERSTAMP 800G OSFP immersion cooling extender first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-immersion-cooling-extender.html/feed 0 FIBERSTAMP 800G QSFP-DD to 2x400G QSFP112 Active Copper Cable ACC https://www.fiberstamp.com/800g-qsfp-dd-to-2x400g-qsfp112-acc.html https://www.fiberstamp.com/800g-qsfp-dd-to-2x400g-qsfp112-acc.html#respond Sat, 11 Oct 2025 10:11:28 +0000 https://www.fiberstamp.com/?post_type=product&p=13852 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FZL2J-800XXM05C cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the dual QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with QSFP-DD MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post FIBERSTAMP 800G QSFP-DD to 2x400G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug QSFP-DD&QSFP112 form factor
  • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
  • Support up to 5m length
  • 100 ohm differential impedance system
  • 3V power supply & typical power consumption 2.5W
  • Commercial case temperature range of 0°C to 70°C
  • I2C management

Applications

  • Infiniband NDR/HDR/EDR
  • Switch / router / HBA
  • Enterprise network
  • Data Center Network
  • Data storage and communication industry

STANDARDS COMPLIANCE

  • IEEE P802.3ck D3.0
  • QSFP-DD/QSFP112 MSA HW Rev 6.01
  • CMIS 4.0
  • RoHS

The post FIBERSTAMP 800G QSFP-DD to 2x400G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-qsfp-dd-to-2x400g-qsfp112-acc.html/feed 0 800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC https://www.fiberstamp.com/800g-qsfp-dd-to-4x200g-qsfp112-acc.html https://www.fiberstamp.com/800g-qsfp-dd-to-4x200g-qsfp112-acc.html#respond Sat, 11 Oct 2025 09:58:50 +0000 https://www.fiberstamp.com/?post_type=product&p=13848 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FZL4J-800XXM05C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s, each QSFP-DD/QSFP112 port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface, it’s a high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post 800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug QSFP-DD and QSFP112 form factor
  • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
  • Support up to 5m length
  • 100 ohm differential impedance system
  • 3V power supply & typical power consumption 3.5W
  • Commercial case temperature range of 0°C to 70°C
  • I2C management

Applications

  • Infiniband NDR/HDR/EDR
  • Switch / router / HBA
  • Enterprise network
  • Data Center Network
  • Data storage and communication industry

STANDARDS COMPLIANCE

  • IEEE P802.3ck D3.0
  • QSFP-DD/QSFP112 MSA HW Rev 6.01
  • CMIS 4.0
  • RoHS

 

The post 800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-qsfp-dd-to-4x200g-qsfp112-acc.html/feed 0 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html#respond Mon, 08 Sep 2025 02:58:34 +0000 https://www.fiberstamp.com/?post_type=product&p=13809 FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FWU4J-800xxxxxC cable connects data signals from each of the 16 pairs on the single OSFP end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP-MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

]]> Features

  • Hot-plug OSFP CTHS and QSFP112 form factor
  • Support 8x 50/100Gb/s PAM4 modulation with 16 pairs
  • Support up to 5m length
  • 100Ohm differential impedance system
  • 3V power supply & typical power consumption 3.5W
  • Commercial case temperature range of 0°C to 70°C
  • I2C management

Applications

  • Infiniband NDR/HDR/EDR
  • Switch / router / HBA
  • Enterprise network
  • Data Center Network
  • Data storage and communication industry

STANDARDS COMPLIANCE

  • IEEE P802.3ck D3.0
  • QSFP-DD MSA HW Rev 4.1
  • QSFP112 MSA HW Rev 6.01
  • CMIS 4.0
  • RoHS

The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-to-4x200g-qsfp112.html/feed 0 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html#respond Mon, 08 Sep 2025 02:46:30 +0000 https://www.fiberstamp.com/?post_type=product&p=13807 FIBERSTAMP’s 800G OSFP to 4x200G OSFP cable assembly splitter is effective alternative to fiber optics. The cable

connects data signals from each of the 16 pairs on the single OSFP end to the quad OSFP RHS ends, each pair

operates at data rates of up to 100Gb/s, each OSFP/OSFP RHS port can be addressed by EEPROM to provide

product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWU4U-800xxxxxC cable assembly splitter is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high

performance, lowest-cost &latency &power consumption I/O solutions for LAN, HPC and SAN. The high speed cable

assemblies meet and exceed 800 Gigabit Ethernet, InfiniBand EDR /HDR/NDR and temperature requirements for

performance and reliability.

The height of OSFP CTHS (Close Top Heat Sink) is fully compliant with OSFP finned top, OSFP RHS(Riding Heat Sink)

also can be called flat top, it’s a little bit lower than OSFP CTHS.

The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

]]> Features

 Hot-plug OSFP CTHS and OSFP RHS form factor

 Support 8x 50/100Gb/s PAM4 modulation

 Commercial case temperature range of 0°C to 70°C

 26 AWG ~30 AWG support up to 2m length above

 Contain EEPROM & programmable to customized

 

Applications

 Data storage and communication industry

 Switch / Router / HBA/NIC

 Enterprise network

 Data Center Network

 Infiniband

 

STANDARDS COMPLIANCE

 IEEE P802.3ck D3.0

 OSFP MSA HW Rev 4.1

 ROHS

 

The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/800g-osfp-to-4x200g-osfp-rhs.html/feed 0 Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersion-800g-osfp-dr8.html https://www.fiberstamp.com/immersion-800g-osfp-dr8.html#respond Fri, 15 Aug 2025 06:50:24 +0000 https://www.fiberstamp.com/?post_type=product&p=13748 The FIBERSTAMP 800G OSFP DR8 is a transceiver module designed for optical communication applications of up to 500 m in liquid immersion environments. It is built on two core technological pillars—advanced silicon photonics chips and a state-of-the-art 5 nm DSP—working in synergy to deliver exceptional performance, efficiency, and integration.

Specifically engineered for liquid immersion, the module’s housing is sealed with a protective coating to prevent coolant ingress into the optical engine. Compared with other liquid-immersion optical solutions, this design incorporates a dedicated pressure test point for leakage detection, giving the sealing and testing process a unique advantage in manufacturing quality assurance.

Built to withstand the most demanding operating conditions, the module resists extreme temperatures, high humidity, and EMI interference. It also offers extensive functionality and feature integration, all accessible via a two-wire serial interface.

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • OSFP MSA and CMIS compliant
  • 25Gbps (53.125GBd PAM4) electrical interface
  • 25Gbps (53.125GBd PAM4) optics architecture
  • Power consumption <15W
  • Up to 500m G.652 SMF with KP-FEC
  • Support pluggable dual MPO-12 pigtails
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant (lead free)

Applications

    • 800GBASE-DR8
    • AI/ML Application
    • Data center network
    • Especially design for liquid immersion environment

The post Immersion 800G OSFP DR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersion-800g-osfp-dr8.html/feed 0 800G-CR8 (OSFP RHS) Active Copper Cable https://www.fiberstamp.com/800g-cr8-osfp-rhs-acc.html https://www.fiberstamp.com/800g-cr8-osfp-rhs-acc.html#respond Fri, 06 Jun 2025 09:32:47 +0000 https://www.fiberstamp.com/?post_type=product&p=13563 FIBERSTAMP’s OSFP RHS ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FZU-800-XXM02C cable connects data signals from each of the 16 pairs on the single OSFP RHS end to the other OSFP RHS end, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet 400Gigabit Ethernet, Infiniband requirements for performance and reliability.

The post 800G-CR8 (OSFP RHS) Active Copper Cable first appeared on FIBERSTAMP.

]]>
    • Features
      • Hot-plug OSFP RHS form factor
      • Support 8x 100Gb/s PAM4and NRZ
      • Support up to 5m length
      • 100Ohm differential impedance system
      • 3V power supply & typical power consumption 2.5W
      • Commercial case temperature range of 0°C to 70°C
      • I2C management

      Applications

      • Infiniband NDR/HDR/EDR
      • Switch / router / HBA
      • Enterprise network
      • Data Center Network
      • Data storage and communication industry

       

      STANDARDS COMPLIANCE

      • IEEE P802.3ck D3.0
      • OSFP MSA R4.1
      • CMIS 4.0
      • ROHS

    • The post 800G-CR8 (OSFP RHS) Active Copper Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/800g-cr8-osfp-rhs-acc.html/feed 0