4x200g - FIBERSTAMP

800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC

ketty — Sat, 11 Oct 2025 09:58:50 +0000

FIBERSTAMP’s ACC(Active Copper Cable) assembly series product provide superior signal integrity performance and reliability, comparing to PCC and AOC, ACC is a re-drive solution which built-in linear equalizer to compensate transmission loss, it is an effective solution with low power, low latency, low cost to help high-speed data centers even AI high-computational applications.

FIBERSTAMP’s FZL4J-800XXM05C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s, each QSFP-DD/QSFP112 port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface, it’s a high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post 800G QSFP-DD to 4x200G QSFP112 Active Copper Cable ACC first appeared on FIBERSTAMP.

800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable

ketty — Mon, 08 Sep 2025 02:58:34 +0000

FIBERSTAMP’s FWU4J-800xxxxxC cable connects data signals from each of the 16 pairs on the single OSFP end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP-MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable

ketty — Mon, 08 Sep 2025 02:46:30 +0000

FIBERSTAMP’s 800G OSFP to 4x200G OSFP cable assembly splitter is effective alternative to fiber optics. The cable

connects data signals from each of the 16 pairs on the single OSFP end to the quad OSFP RHS ends, each pair

operates at data rates of up to 100Gb/s, each OSFP/OSFP RHS port can be addressed by EEPROM to provide

product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWU4U-800xxxxxC cable assembly splitter is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high

performance, lowest-cost &latency &power consumption I/O solutions for LAN, HPC and SAN. The high speed cable

assemblies meet and exceed 800 Gigabit Ethernet, InfiniBand EDR /HDR/NDR and temperature requirements for

performance and reliability.

The height of OSFP CTHS (Close Top Heat Sink) is fully compliant with OSFP finned top, OSFP RHS(Riding Heat Sink)

also can be called flat top, it’s a little bit lower than OSFP CTHS.

The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

800G QSFP-DD to 4x200G QSFP112 Direct Attach Cable

ketty — Thu, 17 Apr 2025 09:56:08 +0000

FIBERSTAMP’s passive copper cable assembly series product provide superior signal integrity performance and reliability,QSFP-DD passive copper cable assembly doubles the number of 25G NRZ &50G PAM4/lane from 4 to 8 lanes comparing QSFP cabling systems, double density still maintains backward plug compatibility to meet next generation market needs.

FIBERSTAMP’s FWL4J-80030D15C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the quad QSFP-DD ends, each pair operates at data rates of up to 100Gb/s, each QSFP-DD/QSFP112 port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWL4J-80030D15C cable assemblies is compliant with the QSFP-DD-MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 800Gigabit Ethernet, InfiniBand EDR /HDR and temperature requirements for performance and reliability.

The post 800G QSFP-DD to 4x200G QSFP112 Direct Attach Cable first appeared on FIBERSTAMP.