2020 - FIBERSTAMP

FIBERSTAMP Launches a Full Range of xWDM Transceivers for 5G Fronthaul

FIBERSTAMP — Thu, 30 Jul 2020 08:39:00 +0000

July 30, 2020 — In response to 5G network deployment needs, FIBERSTAMP, the leader beyond 200G in the optical communications industry, began a comprehensive upgrade of the design of xWDM transceivers above 10G as early as 2018, and now officially launched a full range of 5G fronthaul xWDM transceivers, including 10G CWDM, 10G DWDM, 25G CWDM, 25G DWDM and 25G LWDM series.

The 5G fronthaul network has stringent requirements on the bandwidth and delay of the bearer network. The current solution gives priority to using the eCPRI interface, and the delay requirement is less than 100µs. FIBERSTAMP’s 5G fronthaul series xWDM transceivers comply with CPRI/eCPRI standards and are widely used in 25G Ethernet and 5G fronthaul networks. They have excellent characteristics such as high reliability and low latency. In order to meet the requirements of 5G fronthaul outdoor applications, FIBERSTAMP has completed the formulation and implementation of product design standards under industrial temperature environments. All of the newly launched 5G fronthaul xWDM transceivers meet industrial temperature standards and perform well in harsh outdoor environments.

FIBERSTAMP’s full range of 5G fronthaul xWDM transceivers are shown as the following list.

10G CWDM SFP+ series, 1470nm-1610nm, 40km, < 1.8W, I-Temp
10G DWDM SFP+ series, C18-C61, 40km/80km, < 2W, I-Temp for 40km and E-Temp for 80km
25G CWDM SFP28 series, 1270nm-1370nm < 1.2W E-Temp, 1470nm-1570nm < 1.8W I-Temp
25G DWDM SFP28 series, C18-C61, 10km, < 2W, I-Temp
25G LWDM SFP28 series, 9 LAN-WDM options, 30km w/o FEC or 40km w/ FEC, < 1.8W, I-Temp

FIBERSTAMP’s 5G fronthaul series xWDM transceivers can also be combined with passive xWDM components to form a more complete 5G fronthaul xWDM solution that uses a pair or one fiber to realize multiple AAU to DU connections, and greatly saves fiber resources for operators and solves the problem of fiber resource shortage.

The post FIBERSTAMP Launches a Full Range of xWDM Transceivers for 5G Fronthaul first appeared on FIBERSTAMP.

FIBERSTAMP Launches a Complete 200G Data Center Product Line

FIBERSTAMP — Tue, 30 Jun 2020 08:44:00 +0000

June 30, 2020 — FIBERSTAMP officially launched a complete 200G data center product line to meet the new requirements of hyperscale data centers and 5G in terms of bandwidth, reliability and cost of data communication products. The product line mainly includes two series:

200G QSFP56 Series (4x50G PAM4)

200G QSFP56 SR4/AOC — VCSEL, reach up to 100m over OM4 MMF with 5W maximum power consumption
200G QSFP56 DR4 — uncooled EML, reach up to 500m (standard version) or 2km (enhanced version) over SMF with 5.5W maximum power consumption
200G QSFP56 FR4 — cooled CWDM EML, reach up to 2km or 10km over SMF with 7W maximum power consumption
200G QSFP56 LR4 — cooled LAN-WDM EML, reach up to 10km over SMF with 7.5W maximum power consumption

200G QSFP-DD Series (8x25G NRZ)

200G QSFP-DD SR8/AOC — VCSEL, reach up to 100m over OM4 MMF with 4W maximum power consumption
200G QSFP-DD PSM8 — DFB, reach up to 2km or 10km over SMF with 6W or 6.5W maximum power consumption

FIBERSTAMP’s 200G series products are designed with low power consumption, which can guarantee zero error transmission post-FEC and 100% FEC Margin performance in terms of transmission, and is very suitable for data center and 5G application scenarios. In addition, the product line completely adopts self-designed optical engine components, which can be mass-produced and build a solid IT infrastructure foundation for the development of next-generation data centers.

The post FIBERSTAMP Launches a Complete 200G Data Center Product Line first appeared on FIBERSTAMP.

With Hope | FIBERSTAMP Exhibits at OFC2020

FIBERSTAMP — Tue, 10 Mar 2020 08:48:00 +0000

Affected by the novel coronavirus epidemic situation (COVID-19) , this OFC 2020 can be described as many twists and turns. After understanding the risk of the epidemic, FIBERSTAMP set up the OFC 2020 special action group for the first time. After a long period of preparation and preset assessment of various risk conditions, FIBERSTAMP made a careful and thoughtful decision, as promised exhibiting on March 8-12 OFC 2020 exhibition and conference in San Diego, California, and strict control in all aspects to ensure the company’s employees and visiting customers during the exhibition.

FIBERSTAMP will highlight the latest combination products in the data center field and 5G field. The data center field focuses on the industry-leading 400G / 200G AOC / optical module products, including 400G QSFP56-DD AOC (50G PAM4 DSP), 200G QSFP-DD AOC (25G NRZ), 200G QSFP56 AOC (50G PAM4 DSP), 50G SFP56 AOC (50G PAM4 DSP) and other products; and 200G QSFP56 FR4 / ER4 / LR4 / DR4 / SR4 series using 50G PAM4 DSP modulation method, 200G QSFP-DD LR8 / PSM8 / SR8 series using 8*25G NRZ modulation method product.

In addition, FIBERSTAMP’s well-proven 5G fronthaul, mid / backhaul product solutions will also be exhibited during the exhibition. 25G industrial optical modules, industrial 25G CWDM, and DWDM optical modules are represented, among which 25G BIDI hot selection solutions It can also save 50% of optical fiber resources; a mid / backhaul solution with 50G PAM4 high-order modulation technology and 100G / 200G high bandwidth as the highlights.

More product highlights and details will be highlighted at the exhibition site. During epidemic prevention, safety is paramount. FIBERSTAMP also warmly reminds you to fully take personal protective measures before viewing the exhibition. We are with you at OFC2020 at Booth#4907!

The post With Hope | FIBERSTAMP Exhibits at OFC2020 first appeared on FIBERSTAMP.