MMF - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 29 Jul 2026 08:43:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png MMF - FIBERSTAMP https://www.fiberstamp.com 32 32 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2#respond Wed, 29 Jul 2026 07:54:15 +0000 https://www.fiberstamp.com/?post_type=product&p=15292 FIBERSTAMP immersion 400G QSFP-DD SR8 is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with FEC, the optical interface is pluggable MPO16 pigtail.

It’s suitable for immersion environment, the internal optics are covered and protected with special technique to prevent cooling liquid leakage.

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 53Gbps per channel
  • 8x53Gbps PAM4 transmitter and PAM4 receiver
  • 8 channels 850nm VCSEL array
  • 8 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <8.5W
  • Hot Pluggable QSFP DD form factor and Compliant with CMIS
  • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 pigtail
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)

Applications

  • IEEE 802.3cd 200GBASE-SR4
  • Especially design for liquid immersion environment

The post 400G QSFP-DD SR8 Optical Transceiver for liquid cooling (MPO16) first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-400g-qsfp-dd-sr8.html-2/feed 0 Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html#respond Thu, 23 Jul 2026 10:24:54 +0000 https://www.fiberstamp.com/?post_type=product&p=15273 FIBERSTAMP 800G QSFP-DD AOC is Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. Both ends of this product are 800G QSFP-DD liquid immersion transceivers , internal optics are covered and protected with special technique to prevent cooling liquid leakage, the both side optical interface is MPO16 and pluggable with MPO16 optical jumper.

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Power consumption <14W per end
  • Hot Pluggable QSFPDD form factor and Compliant with CMIS
  • Maximum link length 100m on OM4 MMF with FEC
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS compliant(lead free)
  • Especially design for liquid immersion environment
  • Pluggable MPO16 optical jumper

 

Applications

  • IEEE 802.3db&nbsp2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD Active Optical Cable Optical for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-aoc.html/feed 0 Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2 https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2#respond Thu, 23 Jul 2026 10:14:07 +0000 https://www.fiberstamp.com/?post_type=product&p=15270 FIBERSTAMP immersion 800G QSFP-DD SR8 Optical Transceiver Module is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFPDD Double Density for 800 Gigabit Ethernet Applications in liquid immersion environment. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x53.125GBd. Each lane can operate at 106.25Gbps up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses pluggable MPO16 pigtail. The Common Management Interface Specification (CMIS) for QSFP-DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> Features

  • 8 channelsfull-duplex transceiver modules
  • Transmission data rate up to 106.25G per channel
  • 25Gbps PAM4 transmitter and PAM4 receiver
  • Internal CDR circuits on both receiver and transmitter channels
  • Power consumption <13.5W
  • Hot Pluggable QSFP-DD form factor and Compliant with CMIS
  • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
  • Pluggable MPO16 APC pigtail with customized length
  • Built-in digital diagnostic functions
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS  compliant(lead free)
  • Pluggable MPO16 pigtail

 

Applications

  • IEEE 802.3db 2 x 400GBASE-SR4 Ethernet (PAM4)
  • The transceiver is designed for Ethernet, Telecom and Infiniband use cases
  • Especially design for liquid immersion environment

The post Immersion 800G QSFP-DD SR8 Optical Transceiver Module for liquid cooling first appeared on FIBERSTAMP.

]]> https://www.fiberstamp.com/immersible-800g-qsfp-dd-sr8.html-2/feed 0 FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp-dd-sr4.html https://www.fiberstamp.com/200g-qsfp-dd-sr4.html#respond Fri, 03 Jul 2026 08:45:20 +0000 https://www.fiberstamp.com/?post_type=product&p=15129 The FIBERSTAMP 200G QSFP DD SR4 is a Pluggable, Parallel, Fiber-Optic QSFP Double Density for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with KP-FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface 200GAUI-8(no FEC)1 uses a 76 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 4x53Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array
    • 4 channels PIN photo detector array
    • Internal 8:4 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Power consumption <7W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with KP-FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3bs 200GBASE-SR4

    • The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr4.html/feed 0     400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html#respond Fri, 03 Jul 2026 08:28:32 +0000 https://www.fiberstamp.com/?post_type=product&p=15126 FIBERSTAMP’s FYJH-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The QSFP112 port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s. The QSFP56 module can convert 4-channel 53.125Gb/s electrical data to 2 parallel channels of optical signals, each supporting106.25Gb/s data transmission. Reversely, it can convert 2-channel 106.25Gb/s optical signals to 4-channel electrical output data on the receiver side. It is compliant with IEEE 802.3db, and QSFP112 &QSFP56 MSA.

    The post 400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP112 and QSFP56 form factor
    • 25Gbps PAM4 transmitter and PAM4 receiver(The QSFP112 End)
    • 4 channels 850nm VCSEL array and PIN photo detector array (The QSFP112 End)
    • Power consumption <8W(The QSFP112 End)
    • 2 channels 850nm VCSEL array and PIN photo detector array (The QSFP56 End)
    • Power consumption <5W(The QSFP56 End)
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)(The QSFP56 End)
    • 25Gbps PAM4 Optics architecture(The QSFP56 End)
    • Compliant to QSFP112&QSFP56 MSA and CMIS
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post 400G QSFP112 to 2 x 200G QSFP56 AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-to-2-x-200g-qsfp56.html/feed 0     400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html#respond Mon, 30 Mar 2026 09:39:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14848 FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is used in 4 X 100 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and four separate 100GbE connectors on the other four sides. The cable connects data signals from each of the 8 MMF (Multi Mode Fiber) pairs on the single QSFP56-DD end to the dual pair of each of the QSFP56 multiport ends.

    FIBERSTAMP’s FYHG-400MXXXC MMF Active Optical Splitter Cable is compliant with the QSFP-DD-MSA and with 100GBASE-SR2 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

    The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug QSFP56-DD and QSFP28form factor
    • QSFP28 Electrical interface supports 4x 25G NRZ or 2X 50G PAM4
    • Host RS-FEC needs OFF When QSFP56Electrical interface is 4x25G NRZ
    • 8x 50Gb/s PAM4 modulation
    • Low power dissipation <9W (400G End)
    • Low power dissipation <4.5W (100G End)
    • RoHS-6 compliant (lead-free)
    • Commercial case temperature range of 0°C to 70°C
    • Single 3.3V power supply
    • Maximum link length of 70m on OM3 MMF
      and 100m on OM4 & OM5 MMF
    • Uncooled 850nm VCSEL array (both End)
    • PIN photo detector array (both End)
    • 400GBASE-SR8 and 100GBASE-SR2 compliant
    • I2C management interface
    • CMIS V4.0 compliant

     

    Applications

    • IEEE 802.3cd&nbsp100GBASE-SR2 Ethernet (PAM4)
    • IEEE 802.3cd&nbsp400GBASE-SR8 Ethernet (PAM4)

    The post 400G QSFP56-DD to 4x100G QSFP28 MMF Active Optical Splitter Cable 8x50G PAM4 first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp56-dd-to-4x100g-qsfp28-aoc.html/feed 0     400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:53:21 +0000 https://www.fiberstamp.com/?post_type=product&p=14840 FIBERSTAMP’s FYLU-400MxxxC MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP112 port has integrate 4 independent transmit and receive channels and uses QSFP112 MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP112 MSA.

    The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug OSFP-RHS and QSFP112 form factor
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array(both End)
    • 4 channels PIN photo detector array(both End)
    • Power consumption <8W
    • Compliant to OSFP&QSFP112 MSA and CMIS4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post 400G QSFP112 to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-400g-osfp-rhs.html/feed 0     FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html#respond Fri, 27 Mar 2026 09:17:44 +0000 https://www.fiberstamp.com/?post_type=product&p=14837 FIBERSTAMP’s FYLU-400M50C MMF Active Optical Cable is used in 4 X 100Gigabit Ethernet links over OM3/OM4 multimode fiber. The OSFP-RHS port has integrate 4 independent transmit and receive channels, each capable of 106.25Gb/s PAM4 operation for an aggregate data rate of 425Gb/s, while the QSFP-DD port has integrate 4 independent transmit and receive channels and uses QSFP-DD MSA，which provides increased port density and total system cost savings for switches and routers, etc. It is compliant with IEEE 802.3db, IEEE 802.3ck and OSFP&QSFP-DD MSA.

    The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • Hot-plug OSFP-RHS and QSFPDD form factor
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array(both End)
    • 4 channels PIN photo detector array(both End)
    • Power consumption <8W
    • Compliant to OSFP&QSFP-DD MSA and CMIS4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-VR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

    The post FIBERSTAMP 400G QSFP-DD to 400G OSFP-RHS AOC Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-400g-osfp-rhs.html/feed 0     FIBERSTAMP 53G SFP56 Active Optical Cable https://www.fiberstamp.com/53g-sfp56-aoc.html-2 https://www.fiberstamp.com/53g-sfp56-aoc.html-2#respond Mon, 23 Mar 2026 07:56:49 +0000 https://www.fiberstamp.com/?post_type=product&p=14829 The FIBERSTAMP FYD-E50M100C is a single-Channel Active Optical Cable for 26.5625GBd PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     Features

    • full-duplex transceiver modules
    • Transmission data rate up to 53Gbps per channel
    • 53Gbps PAM4 transmitter and PAM4 receiver
    • 850nm VCSEL array
    • PIN photo detector array
    • Internal CDR circuits on both receiver and transmitter channels
    • Power consumption <2W
    • Hot Pluggable SFP form factor and Compliant with SFF-8431,SFF-8472
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS 6 compliant(lead free)

     

    Applications

    • IEEE 802.3cd 50GBASE-SR

    The post FIBERSTAMP 53G SFP56 Active Optical Cable first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/53g-sfp56-aoc.html-2/feed 0     FIBERSTAMP 400G QSFP112 DR4 optical transceiver module for liquid cooling https://www.fiberstamp.com/400g-qsfp112-dr4-immersion.html https://www.fiberstamp.com/400g-qsfp112-dr4-immersion.html#respond Mon, 23 Mar 2026 06:57:47 +0000 https://www.fiberstamp.com/?post_type=product&p=14825 The FIBERSTAMP FQJ-400P4M50C is a transceiver module designed for up to 500m optical communication applications in liquid immersion environment, and it is compliant to QSFP112 MSA type 1 form factor, IEEE 802.3cu protocol. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading DSP chips.

    The optical module is especially designed for liquid immersion, the case is sealed with the sealing material coating to protect optical engine leaking in the coolant, comparing other liquid immersion solutions in optics, the module case has a pressure test point for liquid leakage ,so case sealing and testing technology has unique testability advantage in manufacture.

    This product has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. It offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post FIBERSTAMP 400G QSFP112 DR4 optical transceiver module for liquid cooling first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP112 MSA type 1 and CMIS compliant
    • 25Gbps(53.125GBd PAM4)electrical interface
    • 25Gbps(53.125GBd PAM4)optics architecture
    • Power consumption <8.5W
    • Maximum link length of 500m G.652 SMF with KP-FEC
    • MPO-12 pigtail for liquid immersion
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • 400GBASE-DR4
    • Data center network
    • Especially design for liquid immersion environment

    The post FIBERSTAMP 400G QSFP112 DR4 optical transceiver module for liquid cooling first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-dr4-immersion.html/feed 0