MPO12 - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Tue, 03 Feb 2026 07:06:40 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png MPO12 - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP Color X 400G QSFP-DD PSM4 DWDM4 https://www.fiberstamp.com/product/color-x-400g-qsfp-dd-dwdm4 https://www.fiberstamp.com/product/color-x-400g-qsfp-dd-dwdm4#respond Tue, 03 Feb 2026 06:59:13 +0000 https://www.fiberstamp.com/?post_type=product&p=14633 The Color X 400G QSFP-DD PSM4 DWDM4 is built on 4×100G PAM4 silicon photonic MZ modulation technology, enabling high-capacity DWDM transmission in compact form factors. It supports DWDM O-BAND with 200GHz spacing across 33 channels, delivering transmission distances of up to 10km, and up to 30km when used with an external SOA. The module is equipped with an MPO connector, making it well suited for high-density data center and metro interconnect applications.

The post FIBERSTAMP Color X 400G QSFP-DD PSM4 DWDM4 first appeared on FIBERSTAMP.

]]>
  • 4×100G PAM4 silicon photonic MZ modulation
  • DWDM O-BAND, 200GHz spacing, 33 channels
  • Transmission reach: up to 10km (30km with external SOA)
  • QSFP-DD form factor
  • MPO optical connector

    • The post FIBERSTAMP Color X 400G QSFP-DD PSM4 DWDM4 first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/product/color-x-400g-qsfp-dd-dwdm4/feed 0     FIBERSTAMP 400G OSFP-RHS FR4 2Km EML Transceiver Module https://www.fiberstamp.com/400g-osfp-rhs-fr4.html https://www.fiberstamp.com/400g-osfp-rhs-fr4.html#respond Tue, 29 Jul 2025 10:19:26 +0000 https://www.fiberstamp.com/?post_type=product&p=13665 This FIBERSTAMP 400G OSFP-RHS FR4 product is designed for 2km optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 4 channels of 100Gb/s (PAM4) electrical output data.

    The module incorporates 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength, operating at 100G per channel. The transmitter path incorporates 4 independent EML drivers and EML lasers together with an optical multiplexer. On the receiver path, an optical de- multiplexer is coupled to a 4-channel photodiode array.

    It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post FIBERSTAMP 400G OSFP-RHS FR4 2Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • 4 channels full-duplex transceiver modules
    • Transmission data rate up to 106.25G per channel
    • 25Gbps PAM4 transmitter and PAM4 receiver
    • Hot Pluggable OSFP-RHS form factor and Compliant with CMIS
    • Compliantto 400G-FR4 Technical Specification
    • Power consumption <10W
    • Maximum link length of 2Km G.652 SMF with KP-FEC
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

      • 400G-FR4 Technical Spec D2p0
      • CEI-112G-VSR-PAM4
      • OSFP MSA
      • Data center network
    P/N Description
    FBR-400C4K02C 400G OSFP-RHS FR4 2Km EML Transceiver Module

    The post FIBERSTAMP 400G OSFP-RHS FR4 2Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-osfp-rhs-fr4.html/feed 0     FIBERSTAMP 400G OSFP-RHS LR4 10Km EML Transceiver Module https://www.fiberstamp.com/400g-osfp-rhs-lr4.html https://www.fiberstamp.com/400g-osfp-rhs-lr4.html#respond Tue, 29 Jul 2025 10:09:19 +0000 https://www.fiberstamp.com/?post_type=product&p=13663 This FIBERSTAMP 400G OSFP-RHS product is designed for 10km optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 4 channels of 100Gb/s (PAM4) electrical output data.

    The module incorporates 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength, operating at 100G per channel. The transmitter path incorporates 4 independent EML drivers and EML lasers together with an optical multiplexer. On the receiver path, an optical de- multiplexer is coupled to a 4-channel photodiode array.

    It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post FIBERSTAMP 400G OSFP-RHS LR4 10Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • 4-channel Full-duplex transceiver integrated module in OSFP hot-pluggable form factor
  • 4-channel 850nm VCSEL and PIN
  • Data rate up to 425Gb/s
  • Compliant with OSFP MSA, CMIS 4.0 and IEEE 400GBASE-SR4 Ethernet transport protocols
  • Transmission using 4 parallel pairs of multimode fiber at distances up to 30m (OM3 MMF) or 50m (OM4 MMF)
  • MPO12/APC optical interfaces
  • Power consumption less than 8W
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FBR-400C4K10C 400G OSFP-RHS LR4 10Km EML Transceiver Module

    The post FIBERSTAMP 400G OSFP-RHS LR4 10Km EML Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-osfp-rhs-lr4.html/feed 0     SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp112-dr4.html https://www.fiberstamp.com/400g-qsfp112-dr4.html#respond Tue, 29 Jul 2025 09:10:06 +0000 https://www.fiberstamp.com/?post_type=product&p=13657 The FIBERSTAMP 400G QSFP112 DR4++ is a transceiver module designed for 10km optical communication applications, and it is compliant to QSFP112 MSA, IEEE 802.3cu protocol. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP112 MSA and CMIS compliant
    • 25Gbps(53.125GBd PAM4)electrical interface
    • 25Gbps(53.125GBd PAM4)optics architecture
    • Power consumption <10W
    • Maximum link length of 10km G.652 SMF with KP-FEC
    • MPO-12 receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

      • 400GBASE-DR4++
      • InfiniBand NDR
      • Data center network
    P/N & Data Sheet Description
    FUJ-400P4K10C SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module

    The post SiPh 400G QSFP112 DR4++ 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-dr4.html/feed 0     SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-osfp-dr4-siph.html https://www.fiberstamp.com/400g-osfp-dr4-siph.html#respond Tue, 22 Jul 2025 08:47:00 +0000 https://www.fiberstamp.com/?post_type=product&p=13636 FIBERSTAMP FUR-400P4M50C is a high-performance transceiver module designed for 500-meter optical communication applications. It is fully compliant with OSFP MSA and the IEEE 802.3bs standard.

    This silicon photonics (SiPh) transceiver is built on a state-of-the-art SiPh platform, incorporating both active and passive optoelectronic components. It utilizes advanced 3D packaging technology and industry-leading 7nm DSP chips, delivering a cost-effective, low-power solution for 400GBASE data center applications.

    Engineered for reliability, the module is designed to perform in harsh operating environments, withstanding variations in temperature, humidity, and EMI interference. It provides high functionality and integration, with easy management and control via a two-wire serial interface.

    The post SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features
    ▪ OSFP MSA and CMIS compliant ▪ Compliant to 802.3bs
    ▪ 4×106.25Gbps(53.125GBd PAM4)electrical interface
    ▪ 4×106.25Gbps(53.125GBd PAM4)optics architecture
    ▪ Power consumption <10W
    ▪ Maximum link length of 500m G.652 SMF with KP-FEC
    ▪ MPO-12 receptacles
    ▪ Built-in digital diagnostic functions
    ▪ Operating case temperature 0°C to +70°C
    ▪ 3.3V power supply voltage
    ▪ RoHS compliant(lead free)

    Applications
    ▪ Ethernet and Telecom
    ▪ Infiniband

     

    P/N & Data Sheet Description
    FUR-400P4M50C 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module

    The post SiPh 400G OSFP-RHS DR4 500m Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-osfp-dr4-siph.html/feed 0