MPO/MTP - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Fri, 03 Jul 2026 09:16:59 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png MPO/MTP - FIBERSTAMP https://www.fiberstamp.com 32 32 FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp-dd-sr4.html https://www.fiberstamp.com/200g-qsfp-dd-sr4.html#respond Fri, 03 Jul 2026 08:45:20 +0000 https://www.fiberstamp.com/?post_type=product&p=15129 The FIBERSTAMP 200G QSFP DD SR4 is a Pluggable, Parallel, Fiber-Optic QSFP Double Density for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with KP-FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface 200GAUI-8(no FEC)1 uses a 76 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module can convert 8 channels of 25Gbps (NRZ) electrical input data to 4 channels of 50Gbps (PAM4) optical signal, and also can convert 4 channels of 50Gbps (PAM4) optical signal to 8 channels of 25Gbps (NRZ) electrical output data. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 4x53Gbps PAM4 transmitter and PAM4 receiver
    • 4 channels 850nm VCSEL array
    • 4 channels PIN photo detector array
    • Internal 8:4 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Power consumption <7W
    • Hot Pluggable QSFP DD form factor and Compliant with CMIS
    • Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with KP-FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3bs 200GBASE-SR4

    • The post FIBERSTAMP 200G QSFP DD SR4 Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-sr4.html/feed 0     400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html#respond Mon, 22 Jun 2026 07:58:17 +0000 https://www.fiberstamp.com/?post_type=product&p=15005 The FIBERSTAMP 400G QSFP-DD PSM O-band DWDM4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 400G or 200G Ethernet Metro-Access over DWDM applications and it is compliant to QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

    The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP-DD MSA and CMIS compliant
    • Compliantto 802.3bs 400GBASE-DR4
    • 125Gbit/s PAM4 electrical interface(400GAUI-8)
    • 25Gbps(53.125GBd PAM4)Optics architecture
    • Power consumption <11W
    • Maximum link length of 10km G.652 SMF with KP-FEC
    • Up to 30 km when equipped with an external SOA
    • MPO-12 receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature 0°C to +70°C
    • 3V power supply voltage
    • RoHS compliant(lead free)

    Applications

    • IEEE 802.3bs 400GBASE-DR4
    • Data center network

    The post 400G QSFP-DD PSM O-band DWDM4 10km Silicon Photonics Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-psm-o-band-dwdm4-siph-10km.html/feed 0     FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html#respond Wed, 10 Jun 2026 08:19:11 +0000 https://www.fiberstamp.com/?post_type=product&p=14939 The Fiberstamp Technologies FBL-200P8K20C is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 20km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates Fiberstamp Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

    The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

    ]]>     Features
    • 8channels full-duplex transceiver modules
    • Supports8×25Gb/s aggregate bit rates
    • Supports8×10Gb/s aggregate bit rates if required
    • 8channels 1310nm DFB
    • 8channels PIN photo detector array
    • Internal CDR circuits on both receiver and transmitter channels
    • Support CDR bypass
    • Low power consumption <6.5W
    • Hot Pluggable QSFP DD form factor
    • Up to 20km reach for 652 SMF
    • Single male MPO16(APC 8-degree) connector receptacle
    • Operating case temperature 0°C to +70°C
    • 3Vpower supply voltage
    • RoHS compliant (lead free)

    Applications

      • 2×100GEthernet links
      • Infiniband DDR/EDR
      • Datacenter and Enterprise networking

    The post FIBERSTAMP 200G QSFP DD xPSM8 20km Optical Transceiver(MPO16) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp-dd-xpsm8-20km.html/feed 0     FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr2.html https://www.fiberstamp.com/100g-qsfp28-sr2.html#respond Mon, 01 Dec 2025 09:49:17 +0000 https://www.fiberstamp.com/?post_type=product&p=14163 The FIBERSTAMP 100G SR2 QSFP28 optical transceiver is designed for using in 100-Gigabit Ethernet links up to 70m using OM3 and 100m using OM4. It is compliant with the QSFP28 MSA, IEEE 802.3cd and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

    The module incorporates 2 channels 850nm VCSEL Array and PIN photo detector array. This results in an aggregate bandwidth of 100Gbps into a MPO cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. This transceiver is a high performance module for short-range duplex data communication and interconnects applications.

    The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     Features

    • QSFP28 module form factor
    • Support QSFP28 SFF-8436/8636
    • 125Gbps(26.5625GBd) PAM4 parallel optics architecture
    • 78125Gbps NRZ retimed electrical I/O
    • 2 channels 850nm VCSEL Array and PIN photo detector array
    • Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
    • Single MPO12/APCreceptacle(Only use channel 1 and channel 2)
    • Maximum link length of 100m OM4,70m OM3(DSP KP4-FEC is ON)
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • Low power consumption < 4W
    • RoHS compliant (lead free)

     

    Applications

      • 100G SR2（2x 50G PAM4）applications
      • High-speed interconnects within and between switches, routers and transport equipment
      • Server-server clusters, super-computing interconnections
      • Proprietary backplanes
      • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
    P/N Description
    FEG-100S2M10C 100GE QSFP28 SR2 Optical Transceiver

    The post FIBERSTAMP 100G QSFP28 SR2 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-sr2.html/feed 0     FIBERSTAMP 100G QSFP28 SR1 Optical Transceiver https://www.fiberstamp.com/100g-qsfp28-sr1.html https://www.fiberstamp.com/100g-qsfp28-sr1.html#respond Fri, 27 Jun 2025 09:50:05 +0000 https://www.fiberstamp.com/?post_type=product&p=13609 The FIBERSTAMP 100G QSFP28 SR1 is a single-Channel, Pluggable, Fiber-Optic QSFP28 for 106.25Gbps PAM4 Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps up to 100 m using OM4 fiber or 100 m using OM5 fiber. It is compliant with the QSFP28 MSA ,100GBASE-SR1 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

    This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm.The optical interface uses duplex LC/APC receptacle. This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    1. KR-FEC is optional, please contact us if necessary.

    The post FIBERSTAMP 100G QSFP28 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • Features
    • Full-duplex transceiver modules
    • 78125Gbps NRZ electrical interface(CAUI-4)
    • 25GbpsPAM4 transmitter and PAM4 receiver
    • 850nm VCSEL and PIN receiver
    • Internal DSP on both receiver and transmitter channels
    • Power consumption <5W
    • Hot Pluggable QSFP28form factor
    • Up to 100m transmission distance on OM4/OM5 MMF with FEC
    • Duplex LC/APCconnector
    • Built-in digital diagnostic functions
    • Operating case temperature:0°C to +70°C
    • +3V power supply
    • RoHS compliant(lead free)

     

    Applications

    • IEEE 802.3db100GBASE-SR1
    • P/N Description
    FEG-100S1M10C 100G QSFP28 SR1 Optical Transceiver

    The post FIBERSTAMP 100G QSFP28 SR1 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-sr1.html/feed 0     200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-vr2.html https://www.fiberstamp.com/200g-qsfp56-vr2.html#respond Thu, 19 Jun 2025 08:33:14 +0000 https://www.fiberstamp.com/?post_type=product&p=13602 The FIBERSTAMP 200G QSFP56 VR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)

    The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M03C 200GE QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Modules

    The post 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-vr2.html/feed 0     200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-sr2.html https://www.fiberstamp.com/200g-qsfp56-sr2.html#respond Thu, 19 Jun 2025 08:22:45 +0000 https://www.fiberstamp.com/?post_type=product&p=13600 The FIBERSTAMP 200G QSFP56 SR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M10C 200GE QSFP56 SR2 (4x53G PAM4 to 2x106G PAM4) 100m Optical Modules

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-sr2.html/feed 0     100G QSFP28 PSM DWDM4 C-BAND MPO Optical Transceiver https://www.fiberstamp.com/product/100g-qsfp28-psm-dwdm4-c-band-mpo-optical-transceiver https://www.fiberstamp.com/product/100g-qsfp28-psm-dwdm4-c-band-mpo-optical-transceiver#respond Tue, 12 Mar 2024 03:02:28 +0000 https://www.fiberstamp.com/?post_type=product&p=11202 FIBERSTAMP FEG-100DxK80C is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 PSM4 C-BAND DWDM4 for 100G or 40 Ethernet Metro-Access over DWDM applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 80km over G.652 SMFwith external Mux/Demux, EDFA ,CD compensation.The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector.

    The post 100G QSFP28 PSM DWDM4 C-BAND MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4 channels full-duplex transceiver modules
  • Transmission data rate up to 26Gbps per channel
  • 4 channels C-band EML DWDM
  • Compliant to ITU-T 694.1
  • 4 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter
  • channels
  • Support CDR bypass
  • Low power consumption <5W
  • Hot Pluggable QSFP form factor
  • Up to 80km reach for G.652 SMFwith external Mux/
  • Demux,EDFA ,CD compensation
  • Up to 10km reach for G.652 SMFwithout external CD compensation
  • Single male MPO(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS comp(lead free)
    • P/N Description
    FEG-100DxK80C 100Gb/s QSFP28 PSM4 C-band DWDM, MPO Connector, reach 80km on G.652 , 0~70℃

    The post 100G QSFP28 PSM DWDM4 C-BAND MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/product/100g-qsfp28-psm-dwdm4-c-band-mpo-optical-transceiver/feed 0     400G QSFP112 VR4 VCSEL 850nm 100m MMF MPO Optical Transceiver https://www.fiberstamp.com/400g-qsfp112-vcsel-vr4.html https://www.fiberstamp.com/400g-qsfp112-vcsel-vr4.html#respond Tue, 09 Jan 2024 06:15:11 +0000 https://www.fiberstamp.com/?post_type=product&p=10860 FIBERSTAMP 400G QSFP112 VR4 is a 4-channel 850nm VCSEL hot-pluggable optical module, designed for 400G Ethernet links in data centers, using 100G PAM4 and VCSEL technology, under the premise that the system is enabled FEC, 425Gbps data interconnection within 30m (OM3 MMF) or 50m (OM4 MMF) can be achieved through 4 pairs of multimode fibers.

    The post 400G QSFP112 VR4 VCSEL 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4-channel full-duplex transceiver module in QSFP112 hot-pluggable package
  • 4 channels 850nm VCSEL and PIN
  • Transfer rates up to 425Gb/s
  • Complies with QSFP112 MSA and IEEE 802.3db Ethernet Transport Protocol
  • Transmission using 4 pairs of parallel multimode fibers over distances up to 30m (OM3 MMF) or 50m (OM4 MMF)
  • Power consumption is less than 8W
  • MPO12 optical interface
  • Commercial-grade operating temperature range
  • The supply voltage is 3.3V
  • RoHS compliant (lead-free)
    • P/N Description
    FEJ-400S4M05C 400G QSFP112 VR4 VCSEL 850nm 50m MMF MPO Optical Transceiver Modules

    The post 400G QSFP112 VR4 VCSEL 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp112-vcsel-vr4.html/feed 0     400G QSFP-DD SR4 VCSEL 850nm 100m MMF MPO Optical Transceiver https://www.fiberstamp.com/400g-qsfp-dd-sr4-transceiver.html https://www.fiberstamp.com/400g-qsfp-dd-sr4-transceiver.html#respond Fri, 05 Jan 2024 07:42:52 +0000 https://www.fiberstamp.com/?post_type=product&p=10853 FIBERSTAMP's 400G QSFP-DD SR4 is a hot-pluggable optical transceiver made for high-speed 400G Ethernet links in data centers. Using 100G PAM4 and advanced VCSEL tech, it effortlessly connects up to 425Gbps of data over 100 meters, using 4 pairs of multimode fiber with FEC enabled.

    The post 400G QSFP-DD SR4 VCSEL 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4-channel Full-duplex transceiver integrated module in QSFP-DD hot-pluggable form factor
  • 4-channel 850nm VCSEL and PIN
  • Data rate up to 425Gb/s
  • Compliant with OSFP MSA, CMIS 4.0 and IEEE 400GBASE-SR4 Ethernet transport protocols
  • Transmission using 4 parallel pairs of multimode fiber at distances up to 100m (OM4 MMF)
  • MPO12/APC optical interfaces
  • Power consumption less than 8W
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FEL-400S4M10C 400G QSFP-DD SR4 VCSEL 850nm 100m MMF MPO Optical Transceiver Modules

    The post 400G QSFP-DD SR4 VCSEL 850nm 100m MMF MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-sr4-transceiver.html/feed 0