QSFP56 - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Thu, 19 Jun 2025 09:03:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png QSFP56 - FIBERSTAMP https://www.fiberstamp.com 32 32 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-vr2.html https://www.fiberstamp.com/200g-qsfp56-vr2.html#respond Thu, 19 Jun 2025 08:33:14 +0000 https://www.fiberstamp.com/?post_type=product&p=13602 The FIBERSTAMP 200G QSFP56 VR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 30 m using OM3 fiber or 50 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

The post 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module first appeared on FIBERSTAMP.

]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 30m on OM3 Multimode Fiber (MMF)and 50m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)

    The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M03C 200GE QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Modules

    The post 200G QSFP56 VR2 (4x53G PAM4 to 2x106G PAM4) 50m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-vr2.html/feed 0     200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module https://www.fiberstamp.com/200g-qsfp56-sr2.html https://www.fiberstamp.com/200g-qsfp56-sr2.html#respond Thu, 19 Jun 2025 08:22:45 +0000 https://www.fiberstamp.com/?post_type=product&p=13600 The FIBERSTAMP 200G QSFP56 SR2 is a Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. This module can convert 4-channel 53.125 Gbit/s electrical data to 2 parallel channels of optical signals, each supporting106.25 Gbit/s data transmission. Reversely, it can convert 2-channel 106.25 Gbit/s optical signals to 4-channel electrical output data on the receiver side. Each lane can operate up to 60 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The optical interface uses 12 fiber MTP (MPO) connector. The Common Management Interface Specification (CMIS) for QSFP56 modules, This module incorporates FIBERSTAMP Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>
  • Features
    • 125Gbit/s PAM4 electrical interface(200GAUI-4)
    • 25Gbps(53.125GBd PAM4) Optics architecture
    • 2 channels 850nm VCSEL
    • 2 channels PIN photo detector
    • Power consumption <5W
    • Hot Pluggable QSFP56 form factor and Compliant with CMIS V4.0
    • Maximum link length of 60m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
    • MPO12 APC connector receptacle
    • Built-in digital diagnostic functions
    • Operating case temperature 10°C to +70°C
    • 3V power supply voltage
    • RoHS  compliant(lead free)

     

    Applications

    • IEEE 802.3db&nbsp400GBASE-SR4 Ethernet (PAM4)
    • The transceiver is designed for Ethernet, Telecom and Infiniband use cases.

     

    • P/N Description
    FEH-200S2M10C 200GE QSFP56 SR2 (4x53G PAM4 to 2x106G PAM4) 100m Optical Modules

    The post 200G QSFP56 SR2(4x53G PAM4 to 2x106G PAM4) 100m Optical Transceiver Module first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-sr2.html/feed 0     200GBASE-SR4 QSFP56 AOC for liquid cooling https://www.fiberstamp.com/200g-sr4-qsfp56-aoc.html https://www.fiberstamp.com/200g-sr4-qsfp56-aoc.html#respond Thu, 17 Apr 2025 06:08:29 +0000 https://www.fiberstamp.com/?post_type=product&p=13415 Description

    The FIBERSTAMP’s FQH-20085M10 QSFP56 AOC is designed for use in 200G Ethernet links over OM3/OM4/OM5 multimode fiber, both ends are QSFP56 liquid immersion transceiver and connected by single MPO connector receptacle, internal optics are covered and protected with special technique to prevent cooling liquid leakage, all of active optical cable assemblies are specially designed for liquid immersion environment. They are compliant with the QSFP MSA and IEEE 802.3cd 200GBASE-SR4 specification. Digital diagnostics functions are available via the I2C interface as specified by CMIS V4.0. It integrates 4 data lanes in each direction with 4*53.125Gb/s bandwidth.

    Note:

    Note1:Contact FIBERSTAMP for more details.

    The post 200GBASE-SR4 QSFP56 AOC for liquid cooling first appeared on FIBERSTAMP.

    ]]>
  • Features
    • Hot-pluggable QSFP56 form factor
    • Built-in200G PAM4 DSP
    • Supports 212.5Gb/saggregate bit rates
    • Supports 103.125Gb/s aggregate bit rates if requiredNote1
    • Low power dissipation(per end)<5W
    • RoHS-6 compliant (lead-free)
    • Commercial case temperature rangeof 0°C to 70°C
    • Single 3.3V power supply
    • Maximum link length of 70m onOM3 MMF
      and 100m on OM4& OM5 MMF
    • 4 channels 850nm VCSEL arrayand PIN PD array
    • SingleMPO connector receptacle
    • Built-in digital diagnostic functionalityand CMIS V4.0 compliant

     

    Applications

    • IEEE 802.3cd&nbsp200GBASE-SR4 Ethernet (PAM4)
    • IEEE 802.3bm&nbsp100GBASE-SR4 Ethernet (NRZ)Note1
    • Especially design for liquid immersion environment

    • The post 200GBASE-SR4 QSFP56 AOC for liquid cooling first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-sr4-qsfp56-aoc.html/feed 0     200G QSFP56 Immersible Cooling Extender https://www.fiberstamp.com/immersible-200g-qsfp56-extender.html https://www.fiberstamp.com/immersible-200g-qsfp56-extender.html#respond Mon, 18 Dec 2023 06:37:55 +0000 https://www.fiberstamp.com/?post_type=product&p=10815 FIBERSTAMP's 200G QSFP56 immersion cooling extender, plays a vital role in this liquid immersion solution. It allows standard QSFP transceivers/AOCs to function within an immersion environment. The extender consists of three parts: extender cage, cable, and QSFP housing, enabling customizable cable lengths of up to 0.5m for extension, safeguarding optical components from direct exposure to the liquid.

    The post 200G QSFP56 Immersible Cooling Extender first appeared on FIBERSTAMP.

    ]]>
  • QSFP MSA compliant
  • Typical insertion loss < 5dB@13.28GHz
  • 100ohm differential impedance
  • 3.3V power supply
  • I2C read/write capability
  • LED status indicators
  • Low EMI radiation and crosstalk
  • RoHS 6 compliant (lead-free)
    • P/N Description
    FSQE-PC201-DXX Immersible 200G QSFP56 Cooling Extender

    The post 200G QSFP56 Immersible Cooling Extender first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-200g-qsfp56-extender.html/feed 0     200G QSFP56 Active Directed Copper Cables, 4x50G PAM4, 7Meters(23ft) https://www.fiberstamp.com/200g-qsfp56-acc.html https://www.fiberstamp.com/200g-qsfp56-acc.html#respond Wed, 16 Aug 2023 05:52:26 +0000 https://www.fiberstamp.com/?post_type=product&p=9500 FIBERSTAMP 200G QSFP56 ACC active direct attach copper cable is designed for intra-rack or inter-rack interconnects in data centers. It complies with IEEE 802.3ck 200GBASE-CR4 Ethernet transmission protocol, while also being compatible with InfiniBand NDR transmission protocol. This series of products utilizes 8 pairs of coaxial cables to transmit 4x 50G PAM4 signals, with a maximum reach of 7m.

    The post 200G QSFP56 Active Directed Copper Cables, 4x50G PAM4, 7Meters(23ft) first appeared on FIBERSTAMP.

    ]]>
    • Utilizes QSFP56 hot-pluggable module and coaxial cable assembly
    • 4-channel 50G PAM4 modulation
    • Maximum per-channel data rate of 53.125Gbps
    • Complies with QSFP56 MSA, CMIS, and ETC 200GBASE-CR4 Ethernet transmission protocols
    • Compatible with InfiniBand HDR transmission protocol
    • Customizable cable length up to 7m
    • Bit Error Rate (BER) better than 1E-15
    • Near-zero power consumption
    • I2C management interface
    • Power supply voltage of 3.3V
    • LSZH (Low Smoke Zero Halogen) cable jacket material
    • LF (Lead-Free) HF (Halogen-Free) PCB
    • Complies with RoHS environmental standards (Lead-Free)

    • The post 200G QSFP56 Active Directed Copper Cables, 4x50G PAM4, 7Meters(23ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-acc.html/feed 0     400G QSFP56-DD To 2x 200G QSFP56 Passive Directed Copper Cables, 8x50G PAM4, 3Meters(10ft) https://www.fiberstamp.com/400g-qsfp-dd-2x-200g-qsfp56-pcc.html https://www.fiberstamp.com/400g-qsfp-dd-2x-200g-qsfp56-pcc.html#respond Wed, 16 Aug 2023 02:51:23 +0000 https://www.fiberstamp.com/?post_type=product&p=9495 FIBERSTAMP 400G QSFP56-DD to 2x 200G QSFP56 PCC passive direct attach copper cable is designed for intra-rack or inter-rack interconnects in data centers. It complies with ETC 400GBASE-CR8 and IEEE 802.3cd 200GBASE-CR4 Ethernet transmission protocols, while also being compatible with InfiniBand HDR transmission protocol. This series of products utilizes 16 pairs of coaxial cables to transmit 8x 50G PAM4 signals, with a maximum reach of 2m (30AWG) or 3m (26AWG).

    The post 400G QSFP56-DD To 2x 200G QSFP56 Passive Directed Copper Cables, 8x50G PAM4, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>
  • Utilizes QSFP-DD/QSFP56 hot-pluggable module and coaxial cable assembly
  • 8-channel 50G PAM4 modulation
  • Maximum per-channel data rate of 53.125Gbps
  • Complies with QSFP-DD/QSFP56 MSA and CMIS specifications
  • Complies with ETC 400GBASE-CR8 and IEEE 802.3cd 200GBASE-CR4 Ethernet transmission protocols
  • Compatible with InfiniBand HDR transmission protocol
  • Customizable cable length up to 2m (30AWG) or 3m (26AWG)
  • Bit Error Rate (BER) better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • Power supply voltage of 3.3V
  • LSZH (Low Smoke Zero Halogen) cable jacket material
  • LF (Lead-Free) HF (Halogen-Free) PCB
  • Complies with RoHS environmental standards (Lead-Free)
    • Product Model FWL2H-400xxxxxC
    Distance (Meter) 1-2 3
    Cable Gauge (AWG) 30/26 26

    The post 400G QSFP56-DD To 2x 200G QSFP56 Passive Directed Copper Cables, 8x50G PAM4, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-2x-200g-qsfp56-pcc.html/feed 0     400G QSFP56-DD To 4x 100G QSFP56 Passive Directed Copper Cables, 8x50G PAM4, 3Meters(10ft) https://www.fiberstamp.com/400g-qsfp-dd-4x-100g-qsfp56-pcc.html https://www.fiberstamp.com/400g-qsfp-dd-4x-100g-qsfp56-pcc.html#respond Wed, 16 Aug 2023 02:44:44 +0000 https://www.fiberstamp.com/?post_type=product&p=9494 FIBERSTAMP 400G QSFP56-DD to 4x 100G QSFP56 PCC passive direct attach copper cable is designed for intra-rack or inter-rack interconnects in data centers. It complies with ETC 400GBASE-CR8 and IEEE 802.3cd 200GBASE-CR4 Ethernet transmission protocols, while also being compatible with InfiniBand HDR transmission protocol. This series of products utilizes 16 pairs of coaxial cables to transmit 8x 50G PAM4 signals, with a maximum reach of 2m (30AWG) or 3m (26AWG).

    The post 400G QSFP56-DD To 4x 100G QSFP56 Passive Directed Copper Cables, 8x50G PAM4, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>
  • Utilizes QSFP-DD/QSFP56 hot-pluggable module and coaxial cable assembly
  • 8-channel 50G PAM4 modulation
  • Maximum per-channel data rate of 53.125Gbps
  • Complies with QSFP-DD/QSFP56 MSA and CMIS specifications
  • Complies with ETC 400GBASE-CR8 and IEEE 802.3cd 200GBASE-CR4 Ethernet transmission protocols
  • Compatible with InfiniBand HDR transmission protocol
  • Customizable cable length up to 2m (30AWG) or 3m (26AWG)
  • Bit Error Rate (BER) better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • Power supply voltage of 3.3V
  • LSZH (Low Smoke Zero Halogen) cable jacket material
  • LF (Lead-Free) HF (Halogen-Free) PCB
  • Complies with RoHS environmental standards (Lead-Free)
    • Product Model FWL4H-400xxxxxC
    Distance (Meter) 1-2 3
    Cable Gauge (AWG) 30/26 26

    The post 400G QSFP56-DD To 4x 100G QSFP56 Passive Directed Copper Cables, 8x50G PAM4, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/400g-qsfp-dd-4x-100g-qsfp56-pcc.html/feed 0     200G QSFP56 Passive Directed Copper Cables, 4x50G PAM4, 3Meters(10ft) https://www.fiberstamp.com/200g-qsfp56-pcc.html https://www.fiberstamp.com/200g-qsfp56-pcc.html#respond Tue, 15 Aug 2023 02:13:42 +0000 https://www.fiberstamp.com/?post_type=product&p=9488 FIBERSTAMP 200G QSFP56 PCC passive direct attach copper cable is designed for intra-rack or inter-rack interconnects in data centers. It complies with the IEEE 802.3cd 200GBASE-CR4 Ethernet transmission protocol and is also compatible with the InfiniBand NDR transmission protocol. This series of products utilizes 8 pairs of coaxial cables to transmit 4x 50G PAM4 signals, with a maximum reach of 2m (30AWG) or 3m (26AWG).

    The post 200G QSFP56 Passive Directed Copper Cables, 4x50G PAM4, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>
  • Utilizes QSFP56 hot-pluggable module and coaxial cable assembly
  • 4-channel 50G PAM4 modulation
  • Maximum per-channel data rate of 53.125Gbps
  • Complies with QSFP56 MSA, CMIS, and IEEE 802.3cd 200GBASE-CR4 Ethernet transmission protocols
  • Compatible with InfiniBand HDR transmission protocol
  • Customizable cable length up to 2m (30AWG) or 3m (26AWG)
  • Bit Error Rate (BER) better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • Power supply voltage of 3.3V
  • LSZH (Low Smoke Zero Halogen) cable jacket material
  • LF (Lead-Free) HF (Halogen-Free) PCB
  • Complies with RoHS environmental standards (Lead-Free)
    • Product Model FWH-200xxxxxC
    Distance (Meter) 1-2 3
    Cable Gauge (AWG) 30/26 26

    The post 200G QSFP56 Passive Directed Copper Cables, 4x50G PAM4, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-pcc.html/feed 0     200G QSFP56 To 2x 100G QSFP56 Active Optical Cables 4x50G PAM4, 100Meters(328ft) https://www.fiberstamp.com/200g-qsfp56-2x-100g-qsfp56-aoc.html https://www.fiberstamp.com/200g-qsfp56-2x-100g-qsfp56-aoc.html#respond Fri, 11 Aug 2023 08:04:01 +0000 https://www.fiberstamp.com/?post_type=product&p=9424 FIBERSTAMP 200G QSFP56 to 2x 100G QSFP56 AOC active optical cable is used for short-distance branch interconnection between internal devices in the data center, conforms to IEEE 802.3cd 200GBASE-SR4 Ethernet transmission protocol, and is also compatible with IEEE 802.3cd 100GBASE-SR2 Ethernet and InfiniBand HDR100 transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 70m (OM3) or 100m (OM4/OM5).

    The post 200G QSFP56 To 2x 100G QSFP56 Active Optical Cables 4x50G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating one 200G QSFP56 SR4 and two 100G QSFP56 SR2 optical transceiver modules at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 53.125Gbps
  • Compliant with QSFP56 MSA, CMIS and IEEE 802.3cd 200G
  • BASE-SR4 Ethernet transmission protocol
  • Compatible with IEEE 802.3cd 100GBASE-SR2 Ethernet and InfiniBand HDR100 transmission protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m
  • (OM4/OM5)
  • Power consumption less than 5W (200G QSFP56 SR4 optical module) or 4.5W (each 100G QSFP56 SR2 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYH2H-200MxxxC 200G QSFP56 to 2x 100G QSFP56 AOC

    The post 200G QSFP56 To 2x 100G QSFP56 Active Optical Cables 4x50G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-2x-100g-qsfp56-aoc.html/feed 0     200G QSFP56 To 4x 50G QSFP56 Active Optical Cables 8x25G PAM4, 100Meters(328ft) https://www.fiberstamp.com/200g-qsfp56-4x-50g-qsfp56-aoc.html https://www.fiberstamp.com/200g-qsfp56-4x-50g-qsfp56-aoc.html#respond Fri, 11 Aug 2023 07:46:52 +0000 https://www.fiberstamp.com/?post_type=product&p=9422 FIBERSTAMP  200G QSFP56 to 4x 50G QSFP56 AOC active optical cable is used for short-distance branch interconnection between internal devices in the data center, conforms to IEEE 802.3cd 200GBASE-SR4 Ethernet transmission protocol, and is also compatible with IEEE 802.3cd 50GBASE-SR Ethernet and InfiniBand HDR transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 70m (OM3) or 100m (OM4/OM5).

    The post 200G QSFP56 To 4x 50G QSFP56 Active Optical Cables 8x25G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating one 200G QSFP56 SR4 and four 50G QSFP56 SR optical transceiver modules at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 53.125Gbps
  • Compliant with QSFP56 MSA, CMIS and IEEE 802.3cd 200GBASE-SR4 Ethernet transmission protocol
  • Compatible with IEEE 802.3cd 50GBASE-SR Ethernet and InfiniBand HDR transport protocols
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 70m (OM3) or 100m (OM4/OM5)
  • Power consumption less than 5W (200G QSFP56 SR4 optical module) or 4.5W (each 50G QSFP56 SR optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYH4H-200MxxxC 200G QSFP56 to 4x 50G QSFP56 AOC

    The post 200G QSFP56 To 4x 50G QSFP56 Active Optical Cables 8x25G PAM4, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/200g-qsfp56-4x-50g-qsfp56-aoc.html/feed 0