QSFP+ - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 20 Nov 2024 08:19:35 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png QSFP+ - FIBERSTAMP https://www.fiberstamp.com 32 32 48G SDI QSFP+ PSM4 Optical Transceiver https://www.fiberstamp.com/48g-sdi-qsfp.html https://www.fiberstamp.com/48g-sdi-qsfp.html#respond Tue, 05 Sep 2023 10:05:57 +0000 https://www.fiberstamp.com/?post_type=product&p=9612 FIBERSTAMP 48G SDI QSFP+ PSM4 video optical transceiver modules are designed for 8K ultra-high-definition video signal optical transmission applications, and support reach up to 10km or 20km over 4 pairs of parallel single-mode fibers.

 

The post 48G SDI QSFP+ PSM4 Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Hot-pluggable QSFP+ optical transceiver modules
  • 4-channel DFB transmitter array and PIN receiver array
  • PSM4 1310nm and PSM CWDM4 (1271nm, 1291nm, 1311nm, and 1331nm) optional
  • SMPTE ST 297/2081/2082 compliant
  • Support SD-SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI data rates
  • Data rate up to 11.88Gbps per channel
  • Reach up to 10km or 20km over 4 pairs of parallel single-mode fibers
  • 3.5W maximum power consumption
  • Metal housing for lower EMI
  • MPO12 optical interface
  • Optional with MSA or Non-MSA pinout
  • Commercial case operating temperature range
  • 3.3V power supply
  • Compliant with RoHS (lead-free)

    • The post 48G SDI QSFP+ PSM4 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/48g-sdi-qsfp.html/feed 0     Immersion 200G QSFP56 SR4 850nm 100m(328ft) Optical Transceivers https://www.fiberstamp.com/immersible-200g-qsfp56-sr4.html https://www.fiberstamp.com/immersible-200g-qsfp56-sr4.html#respond Thu, 17 Aug 2023 07:34:50 +0000 https://www.fiberstamp.com/?post_type=product&p=9538 FIBERSTAMP 200G QSFP56 SR4 immersible cooling optical module is designed for immersion-based data center 200GBASE-SR4 Ethernet links. It employs 50G PAM4 and VCSEL technology, and with FEC enabled, it can achieve 212.5Gbps data interconnection over 4 pairs of multimode fibers within a distance of up to 100 meters.

    The post Immersion 200G QSFP56 SR4 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>
  • Utilizes hot-pluggable QSFP56 form factor
  • 4-channel full-duplex transceiver module
  • Speeds up to 212.5Gbps
  • Complies with QSFP56 MSA and IEEE 802.3cd 200GBASE-SR4 Ethernet standards
  • 4-channel 53Gb/s PAM4 850nm VCSEL transmitters and PIN receivers
  • Integrated DSP chips in both receiver and transmitter channels
  • Maximum distance of up to 100m over multimode fiber with FEC enabled
  • Power consumption below 4.5W
  • MPO pigtail connector
  • Commercial-grade operating temperature range from 0 to 70 degrees Celsius
  • Power supply voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)

    • The post Immersion 200G QSFP56 SR4 850nm 100m(328ft) Optical Transceivers first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/immersible-200g-qsfp56-sr4.html/feed 0     40G QSFP+ Passive Directed Copper Cables, 4x 10G NRZ, 5Meters(16ft) https://www.fiberstamp.com/40g-qsfp-plus-pcc.html https://www.fiberstamp.com/40g-qsfp-plus-pcc.html#respond Mon, 14 Aug 2023 08:55:10 +0000 https://www.fiberstamp.com/?post_type=product&p=9471 FIBERSTAMP 40G QSFP+ PCC passive direct copper cable is used for interconnection within or between racks within the data center, conforming to IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocol and compatible with the InfiniBand QDR transport protocol. The series uses 8 pairs of coaxial cables to transmit 4x 10G NRZ signals over distances of up to 3m (30AWG) or 5m (26AWG).

    The post 40G QSFP+ Passive Directed Copper Cables, 4x 10G NRZ, 5Meters(16ft) first appeared on FIBERSTAMP.

    ]]>
  • The QSFP+ hot-pluggable package module coaxial cable assembly is used
  • 4-channel 10G NRZ modulation
  • The transmission rate per lane can reach up to 10.3125Gbps
  • Complies with QSFP+ MSA and IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocols
  • Compatible with InfiniBand QDR transmission protocol
  • Cable length up to 3m (30AWG) or 5m (26AWG)
  • The bit error rate (BER) is better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • The supply voltage is 3.3V
  • LSZH (LSZH (LSZH Free Cable) cable outer material
  • LF (lead-free) HF (halogen-free) PCB
  • RoHS compliant (lead-free)
    • Product Model FWF-E40xxxxxC
    Distance (m) 1-3 4-5
    Cable Gauge (AWG) 30 26

    The post 40G QSFP+ Passive Directed Copper Cables, 4x 10G NRZ, 5Meters(16ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-plus-pcc.html/feed 0     40G QSFP+ To 4x 10G SFP+ Passive Directed Copper Cables, 4x10G NRZ, 3Meters(10ft) https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-pcc.html https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-pcc.html#respond Mon, 14 Aug 2023 08:41:56 +0000 https://www.fiberstamp.com/?post_type=product&p=9470 FIBERSTAMP 40G QSFP+ to 4 x 10G SFP+ PCC passive direct copper cable is used for interconnection within or between racks within the data center, conforming to IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocol and compatible with 10GSFP+Cu Ethernet and  InfiniBand QDR transport protocol. The series uses 8 pairs of coaxial cables to transmit 4x 10G NRZ signals over distances of up to 3m (30AWG).

    The post 40G QSFP+ To 4x 10G SFP+ Passive Directed Copper Cables, 4x10G NRZ, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>
  • The QSFP+ hot-pluggable package module coaxial cable assembly is used
  • 4-channel 10G NRZ modulation
  • TAvailable in QSFP+/SFP+ hot-swappable package module coaxial cable assembly
  • 4-channel 10G NRZ modulation
  • The transmission rate per lane can reach up to 10.3125Gbps
  • Complies with QSFP+/SFP+ MSA and IEEE 802.3ba 40GBASE-CR4 Ethernet transport protocols
  • Compatible with 10GSFP+Cu Ethernet and InfiniBand QDR transmission protocol
  • Cable length up to 3m (30AWG)
  • The bit error rate (BER) is better than 1E-15
  • Near-zero power consumption
  • I2C management interface
  • The supply voltage is 3.3V
  • LSZH (LSZH (LSZH Free Cable) cable outer material
  • LF (lead-free) HF (halogen-free) PCB
  • RoHS compliant (lead-free)
    • Product Model FWF4B-E40xxxxxC
    Distance (m) 1-3 4-5
    Cable Gauge (AWG) 30 26

    The post 40G QSFP+ To 4x 10G SFP+ Passive Directed Copper Cables, 4x10G NRZ, 3Meters(10ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-pcc.html/feed 0     40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html#respond Mon, 14 Aug 2023 03:00:48 +0000 https://www.fiberstamp.com/?post_type=product&p=9459 FIBERSTAMP 40G QSFP+ AOC active optical cable is used for short-distance branch interconnection between internal devices in the data center. It complies with IEEE 802.3ba 40GBASE-SR4 transmission protocol, and is also compatible with IEEE 802.3ae 10GBASE-SR and InfiniBand QDR transmission protocols. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3).

    The post 40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating one 40G QSFP+ SR4 and four 10G SFP+ SR optical transceiver modules at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate of each channel can reach up to 10.3125Gbps
  • Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 transmission protocol
  • Compatible with IEEE 802.3ae 10GBASE-SR and InfiniBand QDR transport protocols
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 100m (OM3)
  • Power consumption is less than 1.5W (per 40G QSFP+ SR4 optical module) or 1W (per
  • 10G SFP+ SR optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF4B-E40MxxxC 40G QSFP+ to 4x 10G SFP+ AOC

    The post 40G QSFP+ to 4x 10G SFP+ Active Optical Cables 4x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-4x-10g-sfp-aoc.html/feed 0     120G CXP To 3x 40G QSFP+ Active Optical Cables 12x10G NRZ, 100Meters(328ft) https://www.fiberstamp.com/120g-cxp-3x-40g-qsfp-aoc.html https://www.fiberstamp.com/120g-cxp-3x-40g-qsfp-aoc.html#respond Mon, 14 Aug 2023 01:40:21 +0000 https://www.fiberstamp.com/?post_type=product&p=9446 FIBERSTAMP 120G CXP to 3x 40G QSFP+ AOC active optical cable is used for short-distance interconnection between internal devices in the data center, conforms to IEEE 802.3ba 40GBASE-SR4 Ethernet transmission protocol, and is also compatible with InfiniBand QDR transmission protocol. This series of products uses 12 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3).

    The post 120G CXP To 3x 40G QSFP+ Active Optical Cables 12x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly with a 120G CXP SR10 optical transceiver module integrated at each end
  • Each side contains 12 channels of 850nm VCSEL and PIN
  • The transmission rate of each channel can reach up to 103.125Gbps
  • Compliant with CXP MSA and IEEE 802.3ba 100GBASE-SR10 Ethernet transmission protocol
  • Compatible with IEEE 802.3ae 10GBASE-SR Ethernet and InfiniBand QDR transport protocols
  • Using 12 pairs of parallel multimode optical fiber transmission, the distance can reach up to 300m (OM3) or 400m (OM4)
  • Power consumption is less than 4.5W (per 120G CXP SR10 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYT3F-120MxxxC 120G CXP AOC

    The post 120G CXP To 3x 40G QSFP+ Active Optical Cables 12x10G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/120g-cxp-3x-40g-qsfp-aoc.html/feed 0     40G QSFP+ Active Optical Cables 4x10G NRZ, 300Meters(984ft) https://www.fiberstamp.com/40g-qsfp-plus-aoc.html https://www.fiberstamp.com/40g-qsfp-plus-aoc.html#respond Fri, 11 Aug 2023 09:42:29 +0000 https://www.fiberstamp.com/?post_type=product&p=9433 FIBERSTAMP 40G QSFP+ AOC active optical cable is used for short-distance interconnection between internal devices in the data center, conforms to IEEE 802.3ba 40GBASE-SR4 transmission protocol, and is also compatible with InfiniBand QDR transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 300m (OM3) or 400m (OM4).

    The post 40G QSFP+ Active Optical Cables 4x10G NRZ, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating a 40G QSFP+ eSR4 optical transceiver module at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate of each channel can reach up to 10.3125Gbps
  • Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 transmission protocol
  • Compatible with InfiniBand QDR transport protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 300m (OM3) or 400m (OM4)
  • Power consumption is less than 1.5W (each 40G QSFP+ eSR4 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF-E40MxxxC 40G QSFP+ AOC

    The post 40G QSFP+ Active Optical Cables 4x10G NRZ, 300Meters(984ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-plus-aoc.html/feed 0     56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) https://www.fiberstamp.com/56g-qsfp-plus-aoc.html https://www.fiberstamp.com/56g-qsfp-plus-aoc.html#respond Fri, 11 Aug 2023 09:32:55 +0000 https://www.fiberstamp.com/?post_type=product&p=9432 FIBERSTAMP 56G QSFP+ AOC active optical cable is used for short-distance interconnection between internal devices in the data center. It complies with the 4x16GFC fiber channel transmission protocol and is compatible with the InfiniBand FDR transmission protocol. This series of products uses 4 pairs of parallel multimode optical fiber transmission, and the distance can reach up to 100m (OM3) or 150m (OM4).

    The post 56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>
  • An active optical cable assembly integrating a 56G QSFP+ SR4 optical transceiver module at both ends
  • Each side contains 4 channels of 850nm VCSEL and PIN
  • The transmission rate per channel can reach up to 14.0625Gbps
  • Compliant with QSFP+ MSA (SFF-8436) and 4x16GFC fiber channel transmission protocol
  • Compatible with InfiniBand FDR transport protocol
  • Using 4 pairs of parallel multimode optical fiber transmission, the distance can reach up to 100m (OM3) or 150m (OM4)
  • Power consumption is less than 1.5W (each 56G QSFP+ SR4 optical module)
  • Commercial grade operating temperature range
  • Power supply voltage 3.3V
  • Comply with RoHS environmental protection standard (lead-free)
    • P/N Description
    FYF-F56MxxxC 56G QSFP+ AOC

    The post 56G QSFP+ Active Optical Cables 4x14G NRZ, 100Meters(328ft) first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/56g-qsfp-plus-aoc.html/feed 0     100G QSFP28 Hardened AOC https://www.fiberstamp.com/100g-qsfp28-haoc.html https://www.fiberstamp.com/100g-qsfp28-haoc.html#respond Fri, 11 Aug 2023 08:10:20 +0000 https://www.fiberstamp.com/?post_type=product&p=9425 FIBERSTAMP 100G QSFP28 pluggable hardened active optical cable assemblies support 100G Ethernet, InfiniBand EDR and CPRI Option 10 data rates.

    The post 100G QSFP28 Hardened AOC first appeared on FIBERSTAMP.

    ]]>
  • Hot-pluggable QSFP28 armored active optical cable assemblies
  • 4x 25G NRZ electrical interface
  • 4x 25G NRZ optical interface
  • Data rate up to 25.78125Gbps per channel
  • Compliant with QSFP28 MSA, 100GBASE-SR4 Ethernet, InfiniBand EDR and CPRI Option 10
  • Low power dissipation
  • Industrial case operating temperature range
  • Single 3.3V power supply
  • Built-in digital diagnostic functionality
  • RoHS compliant (lead free)
    • P/N Description
    FYG-100MxxxTH 100G QSFP28 HAOC

    The post 100G QSFP28 Hardened AOC first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/100g-qsfp28-haoc.html/feed 0     40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver https://www.fiberstamp.com/40g-qsfp-zr4.html https://www.fiberstamp.com/40g-qsfp-zr4.html#respond Wed, 09 Aug 2023 06:51:52 +0000 https://www.fiberstamp.com/?post_type=product&p=9252 FIBERSTAMP 40G QSFP+ ZR4 optical transceiver module is designed for long-distance interconnectivity in data centers. It complies with the 40G Ethernet transmission protocol and supports dual rates of 40GE and OTU3. This module features a built-in pair of 4-channel MUX and DEMUX. Each channel operates at a center wavelength of 1295.56nm, 1300.05nm, 1304.58nm, and 1309.14nm. It utilizes a single-mode fiber pair for transmission, enabling distances of up to 80km.

    The post 40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4-channel full-duplex transceiver module in QSFP+ hot-pluggable form factor
  • 4-channel cooled EML LWDM TOSA and PIN ROSA (with built-in SOA)
  • Compliant with QSFP+ MSA, 40G Ethernet and OTN OTU3 transmission protocols
  • Supports transmission rates up to 39.8Gbps to 44.6Gbps
  • Utilizes single-mode fiber for transmission, with a maximum reach of 80km
  • Power consumption of less than 6W
  • Dual LC optical connectors
  • Designed for commercial-grade operating temperature range
  • Operates at a voltage of 3.3V
  • Compliant with RoHS environmental standards (lead-free)
    • P/N Description
    FBF-N40L4K80C 40GE/OTU3 QSFP+ ZR4 EML LWDM4 80km Optical Transceiver Module

    The post 40G QSFP+ ZR4 EML LWDM4 80km SMF LC Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/40g-qsfp-zr4.html/feed 0