FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP 800G OSFP immersion cooling extender (FSOE-PC801-DXX) is an important part of liquid immersion solution, normal OSFP form transceiver/AOC can be used for immersion environment with this product. This product include extender cage, cable, OSFP housing three parts, the cable length can be customized no more than 0.3m for extension, that can avoid the optical lens/engine/interface exposure to the liquid indirectly.

In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins. When insertion and removal frequently, this product can effectively protect the OSFP SMT connector of switch/NIC.

The post FIBERSTAMP 800G OSFP immersion cooling extender first appeared on FIBERSTAMP.

FIBERSTAMP’s FWU4J-800xxxxxC cable connects data signals from each of the 16 pairs on the single OSFP end to the quad QSFP112 ends, each pair operates at data rates of up to 100Gb/s and can be adaptive downward compatibility. The product operates 3.3V power supply and comply with OSFP-MSA and IEEE802.3ck ,it’s high performance & cost effective I/O solutions for LAN, HPC and SAN.

The post 800G OSFP to 4x200G QSFP112 Breakout Active Copper Cable first appeared on FIBERSTAMP.

connects data signals from each of the 16 pairs on the single OSFP end to the quad OSFP RHS ends, each pair

operates at data rates of up to 100Gb/s, each OSFP/OSFP RHS port can be addressed by EEPROM to provide

product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWU4U-800xxxxxC cable assembly splitter is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high

performance, lowest-cost &latency &power consumption I/O solutions for LAN, HPC and SAN. The high speed cable

assemblies meet and exceed 800 Gigabit Ethernet, InfiniBand EDR /HDR/NDR and temperature requirements for

performance and reliability.

The height of OSFP CTHS (Close Top Heat Sink) is fully compliant with OSFP finned top, OSFP RHS(Riding Heat Sink)

also can be called flat top, it’s a little bit lower than OSFP CTHS.

The post 800G OSFP to 4x200G OSFP RHS breakout Direct Attach Cable first appeared on FIBERSTAMP.

FIBERSTAMP can offer rich experience of immersion solution, that includes different form and speed transceivers/AOC/product. FIBERSTAMP 800G QSFP-DD immersion cooling extender (FSQE-PC801-DXX) is an important part of liquid immersion solution, normal QSFP-DD form transceiver/AOC can be used for immersion environment with this product. This product include extender cage, cable, QSFP-DD housing three parts, the cable length can be customized no more than 0.3m for extension, that can avoid the optical lens/engine/interface exposure to the liquid indirectly.

In addition, this product can provide I2C read/write, also can show the status indicators with LED for low speed electrical hardware pins. When insertion and removal frequently, this product can effectively protect the QSFP-DD SMT connector of switch/NIC.

The post 800G QSFP-DD immersion cooling extender first appeared on FIBERSTAMP.

FIBERSTAMP’s FWU-800-XXM02C cable assemblies is compliant with the OSFP-MSA and IEEE 802.3ck, it’s a high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 800Gigabit Ethernet, InfiniBand EDR /HDR and temperature requirements for performance and reliability.

The post 800G-CR8 (OSFP RHS) Direct Attach Cable first appeared on FIBERSTAMP.

FIBERSTAMP’s FWL4J-80030D15C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the quad QSFP-DD ends, each pair operates at data rates of up to 100Gb/s, each QSFP-DD/QSFP112 port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWL4J-80030D15C cable assemblies is compliant with the QSFP-DD-MSA and IEEE802.3ck ,it’s  high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 800Gigabit Ethernet, InfiniBand EDR /HDR and temperature requirements for performance and reliability.

The post 800G QSFP-DD to 4x200G QSFP112 Direct Attach Cable first appeared on FIBERSTAMP.

FIBERSTAMP’s FWL2J-80026D15C cable assemblies are effective alternatives to fiber optics. The cable connects data signals from each of the 16 pairs on the single QSFP-DD end to the dual QSFP112 end, each pair operates at data rates of up to 100Gb/s, each QSFP-DD/QSFP112 port can be addressed by EEPROM to provide product information, which can be read or write by I2C interface.

FIBERSTAMP’s FWL2J-80026D15C cable assemblies is compliant with the QSFP-DD-MSA and IEEE802.3ck ,it’s  high performance & cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 800Gigabit Ethernet, InfiniBand EDR /HDR and temperature requirements for performance and reliability.

The post 800G QSFP-DD to 2x400G QSFP112 Direct Attach Cable first appeared on FIBERSTAMP.

The post 800G QSFP112 Passive Copper Cable 8x100G PAM4 2Meters(6.6ft) first appeared on FIBERSTAMP.

The post 800G OSFP Passive Copper Cable 8x100G PAM4 2 Meters(6.6ft) first appeared on FIBERSTAMP.

The post 800G QSFP-DD SR8 VCSEL 850nm 100m MMF MPO/MTP Optical Transceiver first appeared on FIBERSTAMP.