Access Network - FIBERSTAMP https://www.fiberstamp.com Co-Packaged Optics (CPO) Wed, 11 Jun 2025 03:11:59 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.fiberstamp.com/wp-content/uploads/2022/08/fiberstamp-logo-300-300-100x100.png Access Network - FIBERSTAMP https://www.fiberstamp.com 32 32 100G BIDI-ER1-30km QSFP28 Optical Transceiver https://www.fiberstamp.com/product/100g-qsfp28-bidi-er1-30km-optical-transceiver https://www.fiberstamp.com/product/100g-qsfp28-bidi-er1-30km-optical-transceiver#respond Wed, 11 Jun 2025 03:02:52 +0000 https://www.fiberstamp.com/?post_type=product&p=13567 Description&nbsp

The FIBERSTAMP 100G QSFP28 BIDI ER1-30 optical transceiver, is designed for using in 100-Gigabit Ethernet links up to 30km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA , OIF CEI-28G-VSR and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.

The module incorporates 1 channel optical signal, operating at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps (PAM4) optical signal, and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Single LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 30km links.

The post 100G BIDI-ER1-30km QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

]]>
  • Features
    • Supports 100GBASE-ER1- 30 BIDI
    • Full-duplex transceiver module
    • 781 NRZ electrical interface(CAUI-4)
    • 25Gbps PAM4 based on a cooled EML TOSA transmitter
    • 25Gbps PAM4 APD Receiver
    • 5W maximum power dissipation
    • Hot-pluggable QSFP28 form factor
    • Maximum link length of30km on G.652 SMF with KP-FEC
    • BIDI LC receptacles
    • Built-in digital diagnostic functions
    • Operating case temperature range: 0 to 70°C
    • Single 3.3V power supply
    • RoHS compliant (lead free)

     

    Applications

    • 100G Lambda 100G ER1-30

    • The post 100G BIDI-ER1-30km QSFP28 Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/product/100g-qsfp28-bidi-er1-30km-optical-transceiver/feed 0     100G QSFP28 PSM DWDM4 C-BAND MPO Optical Transceiver https://www.fiberstamp.com/product/100g-qsfp28-psm-dwdm4-c-band-mpo-optical-transceiver https://www.fiberstamp.com/product/100g-qsfp28-psm-dwdm4-c-band-mpo-optical-transceiver#respond Tue, 12 Mar 2024 03:02:28 +0000 https://www.fiberstamp.com/?post_type=product&p=11202 FIBERSTAMP FEG-100DxK80C is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 PSM4 C-BAND DWDM4 for 100G or 40 Ethernet Metro-Access over DWDM applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 80km over G.652 SMFwith external Mux/Demux, EDFA ,CD compensation.The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector.

    The post 100G QSFP28 PSM DWDM4 C-BAND MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>
  • 4 channels full-duplex transceiver modules
  • Transmission data rate up to 26Gbps per channel
  • 4 channels C-band EML DWDM
  • Compliant to ITU-T 694.1
  • 4 channels PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter
  • channels
  • Support CDR bypass
  • Low power consumption <5W
  • Hot Pluggable QSFP form factor
  • Up to 80km reach for G.652 SMFwith external Mux/
  • Demux,EDFA ,CD compensation
  • Up to 10km reach for G.652 SMFwithout external CD compensation
  • Single male MPO(APC 8-degree) connector receptacle
  • Operating case temperature 0°C to +70°C
  • 3V power supply voltage
  • RoHS comp(lead free)
    • P/N Description
    FEG-100DxK80C 100Gb/s QSFP28 PSM4 C-band DWDM, MPO Connector, reach 80km on G.652 , 0~70℃

    The post 100G QSFP28 PSM DWDM4 C-BAND MPO Optical Transceiver first appeared on FIBERSTAMP.

    ]]>     https://www.fiberstamp.com/product/100g-qsfp28-psm-dwdm4-c-band-mpo-optical-transceiver/feed 0